Products

NACORR® 1652 is a liquid corrosion inhibitor based on the magnesium salt of an aromatic sulfonic acid. NACORR® 1652 provides excellent adhesion with outstanding performance in waterborne primers.

K-FLEX® UD-350W is an aqueous solution of an aliphatic, low molecular weight urethane diol oligomer. It is recommended as a modifier for amino crosslinked water soluble and emulsified acrylic, alkyd, urethane and polyester resins. K-FLEX® UD-350W can be used as a reactive cosolvent replacement to increase solids, crosslink density, improve film/resistance properties and flow/leveling.

DISPARLON® LHP-91 is a silicone modified surface control agents based on specially prepared acrylic and vinyl polymers. These products have unique properties that allow them to eliminate cratering caused by various kinds of surface contaminants and spray mists, and promote leveling of the coating.

NACURE® XC-293 is based on proprietary acids designed to improve the adhesion of melamine crosslinked systems to metal. It is especially effective on aluminum substrates. It can be used as the sole catalyst for partially alkylated or high-NH type melamines or in conjunction with strong acid catalysts for fully alkylated melamine systems. XC-293 has also been found to improve the adhesion of thermoplastic and ambient cure coating formulations.

NACORR® 1551 is a liquid corrosion inhibitor based on the zinc salt of an aromatic sulfonic acid offering good stability and enhanced cure rate of amino crosslinked systems.

NACORR® 4426 is an emulsifiable corrosion inhibiting additive that provides excellent rust and corrosion prevention in waterborne emulsion coatings. It is a proprietary preparation of a synthetic sodium dinonylnaphthalenesulfonate and polymers.

DISPARLON® UVX-35 is an excellent leveling additive based on proprietary acrylic co-polymer technology. It is specially designed for acrylic UV coatings to improve leveling and anti-cratering, providing excellent sharpness and smoothness to the coatings. It does not lower the surface tension of coating film and impart very good recoatability avoiding any silicone-caused recoat problems.

K-FLEX® XM-B301 is a low-viscosity, acetoacetate functional reactive diluent with excellent compatibility with a wide range of resins. It is primarily recommended for use in epoxy/polyamide primers, but can also be used in systems crosslinked with amino resins or polyisocyanates.

DISPARLON® AQ-7120 is designed as general purpose wetting & leveling agent based on acrylic-silicone polymers and easily dispersed into waterborne systems with excellent recoatability.

NACORR® 1352 is a liquid corrosion inhibitor based on the calcium salt of an aromatic sulfonic acid. It is compatible with waterborne and solventborne systems and offers an excellent balance of compatibility and performance.

DISPARLON® 1958 is based on a silicone-free, special nonionic, high molecular weight surface active agent. The product, having strong foam-breaking properties, acts as both a defoaming/leveling agent in low polarity solvent-based coatings. It is particularly effective as a defoamer in alkyd ambient-cure systems such as architectural paints.

NACORR® 1754 is a liquid corrosion inhibitor based on an amine salt of an aromatic sulfonic acid. It has excellent compatibility in water-based systems, emulsions and dispersion.

NACORR® XR-418 is a liquid corrosion inhibitor based on the salt of an aromatic sulfonic acid/carboxylate derivative and is specifically designed for aluminum and zinc alloys.

DISPARLON® UVX-36 is an excellent leveling additive based on proprietary acrylic co-polymer technology. It is specially designed for acrylic UV coatings to improve leveling and anti-cratering, providing excellent sharpness and smoothness to the coatings. It does not lower the surface tension of coating film and impart very good recoatability avoiding any silicone-caused recoat problems.

NACORR® 1389 is a liquid corrosion inhibitor based on the calcium salt of an aromatic sulfonic acid/carboxylate complex. It is effective in both waterborne and solventborne coatings and improves corrosion resistance and water resistance.

NACORR® 1651 is a liquid corrosion inhibitor based on the magnesium salt of an aromatic sulfonic acid. Improves water resistance by providing a barrier effect and reducing water permeation of the coating.

DISPARLON® L-1982N is a silicone-free acrylic polymer surface-control additive for leveling and wetting in medium polarity systems. Recommended for high solids alkyd coatings as well as epoxy and phenolic applications.

DISPARLON® 1970 is a silicone-free, high molecular weight surface control agent. The product acts as a leveling agent with a defoaming effect in high polarity solventborne systems such as polyester bake applications, high build urethanes and high solids.

NACORR® 1552 is a liquid corrosion inhibitor based on the zinc salt of an aromatic sulfonic acid, offering excellent adhesion for solvent-based primers. It is catalytic in amino systems and has the best synergy with Zinc ACPs.

NACORR® 1153 is a liquid corrosion inhibitor based on the barium salt of an aromatic sulfonic acid. It is supplied in a HAPS free solvent and is effective in waterborne and solventborne systems.

DISPARLON® LHP-95 is a silicone-free surface control additive based on specially prepared acrylic and vinyl polymers. These products have unique properties that allow them to eliminate cratering caused by various kinds of surface contaminants and spray mists, and promote leveling of the coating.

NACORR® 1151 is a liquid corrosion inhibitor based on the barium salt of an aromatic sulfonic acid. It has excellent performance in waterborne and solventborne systems and is highly recommended for low pH applications.

DISPARLON® L-1984N is a silicone-free, acrylic polymer surface control agent for leveling properties in medium polarity systems. Recommended for acrylic coatings including high solids melamine and 2K urethanes. L-1984N has lower surface tension than L-1980N and can be used where greater wetting is required.

DISPARLON® AQ-200 is an acrylic copolymer leveling agent designed to improve leveling of the film keeping good re-coatability in waterborne systems.

K-FLEX® XM-359 is designed to provide long pot life in 2K polyurethanes and to prevent yellowing resulting from interaction with benzotriazole (BZT) UV absorbers in clearcoat systems. K-FLEX® XM-359 is a saturated, aliphatic resin modifier.

DISPARLON® LHP-96 is a silicone modified surface control agents based on specially prepared acrylic and vinyl polymers. These products have unique properties that allow them to eliminate cratering caused by various kinds of surface contaminants and spray mists, and promote leveling of the coating.

DISPARLON® L-1980N is silicone-free acrylic polymer surface control agent for high polarity solventborne systems. Recommended for use in polyester/melamine and urethane coatings and in unsaturated polyester applications for leveling and defoaming properties.

DISPARLON® L-1983N is a silicone-free acrylic polymer surface control additive for leveling properties in low polarity systems such as epoxy primers and epoxy/acrylic UV cure inks.

NACORR® 1351 is a liquid corrosion inhibitor based on the calcium salt of an aromatic sulfonic acid. NACORR® 1351 promotes pigment dispersion when a small amount is used in the grind, thereby reducing grind time, increasing pigment loading, and improving color strength. It improves gloss properties when used as a dispersant in the grind.

DISPARLON® LHP-90 is a silicone-free surface control additive based on specially prepared acrylic and vinyl polymers. These products have unique properties that allow them to eliminate cratering caused by various kinds of surface contaminants and spray mists, and promote leveling of the coating.

DISPARLON® LS-430 is a surface control additive based on a specially prepared silicone polymer. This product has the unique ability to eliminate cratering caused by various kinds of dirt/stain or spray mists. Effective in waterborne systems.

DISPARLON® NSH-8430HF is a surface control additive based on specially prepared acrylic/silicone copolymers designed for baking paints such as acrylic/melamine, alkyd/melamine, polyester/melamine and acid/epoxy paint for automotive and appliance applications. This product strongly prevents cratering caused by dirt/stain contamination, and gives excellent wetting over low surface tension coatings such as some of the new high-polarity automotive OEM coatings.