Products

K-FLEX® UD-320 is a high solids, aliphatic, low molecular weight urethane diol oligomer. It is soluble in polar organic solvents and has broad compatibility with acrylic, polyester, and alkyd resins. K-FLEX® UD-320 will increase the hardness of a melamine crosslinked system. When used to modify a 2-component polyurethane, it will increase hardness and flexibility. K-FLEX® UD-320 responds best to a zirconium chelate catalyst when used in isocyanate crosslinked systems.

DISPARLON® L-1984N is a silicone-free, acrylic polymer surface control agent for leveling properties in medium polarity systems. Recommended for acrylic coatings including high solids melamine and 2K urethanes. L-1984N has lower surface tension than L-1980N and can be used where greater wetting is required.

DISPARLON® A671-EZ is an easy to use, post addable pre-activated polyamide thixotropic agent in mineral spirits. Recommended for DIY and industrial stains for anti-settling and pigment orientation. It is a softer paste version of A670-20M.

DISPARLON® 6700 is a powder polyamide which, through heat activation, develops a strong thixotropic network, providing excellent anti-sag properties particularly for high build epoxies.

DISPARLON® 6650 is a powder polyamide which, through heat activation, develops a strong thixotropic network, providing excellent anti-sag properties and improved recoatability to coatings while being cost effective.

DISPARLON® DA-375 is a solvent-free wetting and dispersing agent, based on polyether phosphate ester, designed for dispersing pigments in Solvent-free coating systems. Effective with filler, organic, and inorganic pigments. DISPARLON® DA-375 can be used with acid catalysts because it will not react with the catalyst.

DISPARLON® LHP-95 is a silicone-free surface control additive based on specially prepared acrylic and vinyl polymers. These products have unique properties that allow them to eliminate cratering caused by various kinds of surface contaminants and spray mists, and promote leveling of the coating.

DISPARLON® UVX-36 is an excellent leveling additive based on proprietary acrylic co-polymer technology. It is specially designed for acrylic UV coatings to improve leveling and anti-cratering, providing excellent sharpness and smoothness to the coatings. It does not lower the surface tension of coating film and impart very good recoatability avoiding any silicone-caused recoat problems.

K-STAY® 555 is a metal overbased sulfonate rheology control additive for pigmented solventborne applications. It is an easy to use, pourable liquid that is highly efficient in improving pigment suspension and sag control.

K-SPERSE® 152 MS is a highly effective wetting and dispersing agent for all types of pigments. It is a zinc salt of an alkyl aryl sulfonic acid dissolved in mineral spirits and is recommended for use in all solventborne coatings and inks.

DISPARLON® DA-325 is a solvent-free wetting and dispersing agent based on an amine salt of polyether phosphate, designed for dispersing pigments in Solvent-free coating systems. Effective with filler, organic, and inorganic pigments.

DISPARLON® KS-873N is a surface control agent based on anionic surfactant which prevents flocculations, anti-flood, and anti-float in solventborne systems.

DISPARLON® LAP-30 is an acrylic polymer based anti-popping/defoaming agent developed specifically for highly-polar coatings like high-solid baking systems.

DISPARLON® OX-750HF is a defoaming/anti-popping additive based on specially prepared acrylic polymers supplied in HAPs free carrier. This product imparts strong anti-pop and defoaming properties designed for baking paints such as acrylic/melamine, alkyd/melamine and acid/epoxy paint for automotive and appliance applications.

DISPARLON® 6900-20X is a thixotropic agent in paste form consisting of a dispersion of swollen particles of a unique synthetic amide wax. It is easily incorporated into many vehicles and/or solvents and develops an exceptionally strong and long retained thixotropic structure.

DISPARLON® AQ-200 is an acrylic copolymer leveling agent designed to improve leveling of the film keeping good re-coatability in waterborne systems.

DISPARLON® A603-20X is an alcohol-free pre-activated polyamide developed for isocyanate cured paint systems. it can be used on both the polyol and isocyante side of the formulation for anti-settling and anti-sag control.

DISPARLON® AQ-7533N is a general purpose defoaming/anti-popping agent based on a blend of vinyl copolymer, surfactant and hydrocarbons for waterborne systems, designed to disperse uniformly in the paint.

DISPARLON® UVX-35 is an excellent leveling additive based on proprietary acrylic co-polymer technology. It is specially designed for acrylic UV coatings to improve leveling and anti-cratering, providing excellent sharpness and smoothness to the coatings. It does not lower the surface tension of coating film and impart very good recoatability avoiding any silicone-caused recoat problems.

DISPARLON® AQ-501 is an anti-popping and defoaming agent based on vinyl polymer specifically designed for waterborne bake finishes.

DISPARLON® NSH-8430HF is a surface control additive based on specially prepared acrylic/silicone copolymers designed for baking paints such as acrylic/melamine, alkyd/melamine, polyester/melamine and acid/epoxy paint for automotive and appliance applications. This product strongly prevents cratering caused by dirt/stain contamination, and gives excellent wetting over low surface tension coatings such as some of the new high-polarity automotive OEM coatings.

DISPARLON® PFA-231 is a thixotropic agent in paste form consisting of a specially prepared amide wax activated in aromatic free solvent. Develops an exceptionally strong thixotropic structure for anti-settling and anti-sag properties in a wide variety of applications and resin systems.

K-FLEX® XM-B301 is a low-viscosity, acetoacetate functional reactive diluent with excellent compatibility with a wide range of resins. It is primarily recommended for use in epoxy/polyamide primers, but can also be used in systems crosslinked with amino resins or polyisocyanates.

DISPARLON® LAP-10 is an acrylic polymer based anti-popping/defoaming agent developed specifically for intermediate polarity coatings like high-solid baking systems and coil coating.

DISPARLON® LHP-96 is a silicone modified surface control agents based on specially prepared acrylic and vinyl polymers. These products have unique properties that allow them to eliminate cratering caused by various kinds of surface contaminants and spray mists, and promote leveling of the coating.

DISPARLON® A650-20X is a pre-activated polyamide thixotropic agent. When dispersed it is highly efficient in high build epoxy systems for anti-settling and anti-sag properties.

DISPARLON® 6300 is a hybrid powdered thixotropic agent based on amide wax. Low activation temperature is required to build a strong thixotropic network which provides excellent anti-sag properties along with good recoatability and minimal viscosity increase. It is especially effective in epoxy coatings and adhesives.

DISPARLON® UVX-189 is an excellent defoaming additive based on special vinyl polymers. It is specially designed for defoaming of epoxy and acrylic UV coatings imparting excellent air-release at any stage from coating manufacturing to film forming.

K-SPERSE® 152 is a highly effective wetting and dispersing agent for all types of pigments. It is a zinc salt of an alkyl aryl sulfonic acid dissolved in an oxygenated solvent and is recommended for use in all solventborne coatings and inks.

DISPARLON® 6500 is a unique non-reactive polyamide thixotrope supplied as a powder. Through heat activation a strong thixotropic network provides strong anti-sagging and Anti-slumping without seeding or loss of effectiveness on aging. It is effective in caotings, sealants and adhesives formulations.

K-SPERSE® 131 is a highly effective wetting and dispersing agent for all types of pigments. It is a calcium salt of an alkyl aryl sulfonic acid dissolved in an aliphatic solvent and is recommended for use in solventborne coatings and inks.

DISPARLON® LAP-20 is an acrylic polymer based anti-popping/defoaming agent developed specifically for intermediate to high polarity coatings like high-solid baking systems.

K-POL® 9437 is a cost effective, low molecular weight urethane diol. It is recommended as a modifier for waterborne and water reducible amino crosslinked systems. K-POL® 9437 provides increased film hardness, improved acid etch and excellent corrosion resistance.

DISPARLON® LHP-91 is a silicone modified surface control agents based on specially prepared acrylic and vinyl polymers. These products have unique properties that allow them to eliminate cratering caused by various kinds of surface contaminants and spray mists, and promote leveling of the coating.

DISPARLON® EZ-777 is an easily dispersible paste of specially activated synthetic amide wax. It is easily incorporated into many solventborne systems to develop an exceptionally strong and long retained thixotropic structure.

K-FLEX® UD-350W is an aqueous solution of an aliphatic, low molecular weight urethane diol oligomer. It is recommended as a modifier for amino crosslinked water soluble and emulsified acrylic, alkyd, urethane and polyester resins. K-FLEX® UD-350W can be used as a reactive cosolvent replacement to increase solids, crosslink density, improve film/resistance properties and flow/leveling.