Products

K-FLEX® UD-320 is a high solids, aliphatic, low molecular weight urethane diol oligomer. It is soluble in polar organic solvents and has broad compatibility with acrylic, polyester, and alkyd resins. K-FLEX® UD-320 will increase the hardness of a melamine crosslinked system. When used to modify a 2-component polyurethane, it will increase hardness and flexibility. K-FLEX® UD-320 responds best to a zirconium chelate catalyst when used in isocyanate crosslinked systems.

K-FLEX® A308 is a low-viscosity polyester diol designed as a flexibility modifier for acrylic/isocyanate and acrylic/melamine systems. K-FLEX® A308 provides good hardness and adhesion while allowing lower VOC levels.

K-FLEX® A307 is a low viscosity, 100% solids linear, saturated, aliphatic polyester diol. This product is designed as a flexibility modifier for acrylic/isocyanate and acrylic/melamine systems.

DISPARLON® 6900-20X is a thixotropic agent in paste form consisting of a dispersion of swollen particles of a unique synthetic amide wax. It is easily incorporated into many vehicles and/or solvents and develops an exceptionally strong and long retained thixotropic structure.

NACURE® SC-25 is an amine neutralized p-TSA catalyst used to increase the cure response of thermoset waterborne and solventborne coatings that contain amino resin crosslinking agents.

DISPARLON® 6500 is a unique non-reactive polyamide thixotrope supplied as a powder. Through heat activation a strong thixotropic network provides strong anti-sagging and Anti-slumping without seeding or loss of effectiveness on aging. It is effective in caotings, sealants and adhesives formulations.

NACURE® 115 is a strong hydrophobic sulfonic acid catalyst designed for use in bake d amino crosslinked systems. This high active catalyst is designed to help improve direct-to-metal intercoat adhesion properties while maintaining excellent exterior durability.

DISPARLON® OX-750HF is a defoaming/anti-popping additive based on specially prepared acrylic polymers supplied in HAPs free carrier. This product imparts strong anti-pop and defoaming properties designed for baking paints such as acrylic/melamine, alkyd/melamine and acid/epoxy paint for automotive and appliance applications.

NACURE® 5076 is a strong acid catalyst based on Dodecylbenzenesulfonic acid (DDBSA) supplied at 70% active in Isopropanol.

NACURE® XC-235 is an acid phosphate catalyst supplied at 75% active in n-butanol. It is recommended for use with high imino or partially alkylated type melamine crosslinkers.

K-FLEX® XM-337 is an aliphatic saturated polyester diol modifier resin designed to provide increased toughness and chemical resistance for solvent-based and high solids systems. It is recommended for use in 1 and 2 component polyurethanes, and blocked isocyanate systems. Benefits include low color, UV durability, high hardness, high impact resistance, abrasion resistance and overall increased toughness.

DISPARLON® AQ-607 is a polyamide based rheology control agent for waterborne systems. The 3-D network structure prevents sagging and pigment settling. Recommended for emulsions and dispersions for best compatibility.

DISPARLON® AQH-800 is a rheology control additive based on hybridized amide technology developed for waterborne systems. Can be post-added to prevent sagging and pigment settling while keeping viscosity low.

NACURE® 2500 is an amine neutralized p-Toluenesulfonic acid (p-TSA) catalyst designed for low temperature cure and maximum viscosity stability.

NACURE® XC-311 is a novel latent acid catalyst designed to reduce the cure temperature of amino crosslinked systems.

K-FLEX® 188 is a highly reactive, aliphatic polyester diol which is recommended for aminoplast or isocyanate crosslinked coatings, inks, sealants, elastomers, and adhesives. K-FLEX® 188 is the most versatile polyester diol in the K-FLEX® line.

NACURE® 4054 is a hydrophobic alkyl acid phosphate catalyst supplied at 50% active in isobutanol. It is a weak acid catalyst recommended for use with high -NH/polymeric melamines and phenolic crosslinkers.

DISPARLON® AQ-610 is a polyamide based rheology control agent for waterborne systems. A 3-D network structure prevents sagging and pigment settling. Recommended for emulsions and dispersions.

NACURE® 4167 is an amine neutralized phosphate catalyst. It is a weak acid catalyst that is particularly effective with polymeric or high imino melamines and phenolics.

DISPARLON® 6300 is a hybrid powdered thixotropic agent based on amide wax. Low activation temperature is required to build a strong thixotropic network which provides excellent anti-sag properties along with good recoatability and minimal viscosity increase. It is especially effective in epoxy coatings and adhesives.

NACURE® 5925 is an amine neutralized DDBSA catalyst.

K-KAT® 5218 is an aluminum chelate complex catalyst that provides an excellent blend of both fast dry time and increased pot life when used in combination with 2,4 pentanedione. It is recommended for 2K polyurethanes, pultrusion and RIM applications.

DISPARLON® UVX-189 is an excellent defoaming additive based on special vinyl polymers. It is specially designed for defoaming of epoxy and acrylic UV coatings imparting excellent air-release at any stage from coating manufacturing to film forming.

K-FLEX® XM-332 is an ultra low-viscosity polyester polyol modifier resin designed to provide improved flexibility in solvent-based, high solids and solventless systems. Compared to other K-FLEX® polyester diols, XM-332 produces the softest films. K-FLEX® XM-332 is recommended for use in air dry/force dry 2-component polyurethanes and blocked isocyanate systems.

DISPARLON® EZ-777 is an easily dispersible paste of specially activated synthetic amide wax. It is easily incorporated into many solventborne systems to develop an exceptionally strong and long retained thixotropic structure.

K-FLEX® UD-350W is an aqueous solution of an aliphatic, low molecular weight urethane diol oligomer. It is recommended as a modifier for amino crosslinked water soluble and emulsified acrylic, alkyd, urethane and polyester resins. K-FLEX® UD-350W can be used as a reactive cosolvent replacement to increase solids, crosslink density, improve film/resistance properties and flow/leveling.

DISPARLON® AQ-320 is a Solvent-free wetting and dispersing agent based on a polymer containing phosphoric acid ester groups, designed for use with aluminum paste and pearlescent pigments in waterborne coating systems containing co-solvent.

DISPARLON® LHP-91 is a silicone modified surface control agents based on specially prepared acrylic and vinyl polymers. These products have unique properties that allow them to eliminate cratering caused by various kinds of surface contaminants and spray mists, and promote leveling of the coating.

DISPARLON® AQ-001 is a liquid acrylic associative thixotrope for waterborne systems that imparts strong anti-sag properties, has a broad pH range acceptability and comes pre-neutralized for ready to use post addition.

DISPARLON® F-9030 is a thixotropic agent based on a fatty acid amide wax pre-activated in benzyl alcohol and is effective for increasing viscosity. Provides anti-sagging/anti-settling in non-solvent systems.

DISPARLON® AQ-633E is a polyamide rheology control agent for waterborne systems. DISPARLON® AQ-633E forms a network structure to prevent settling and hard caking and to improve pigment orientation. Recommended for the best metallic orientation.

DISPARLON® NS-5500 is a post addable hybrid thixotropic agent based on a combination of unique technologies supplied as a free flowing paste. DISPARLON® NS-5500 enables uniform coverage with good gloss, pigment orientation, improved flip/flop, anti-settling and anti-sag properties while keeping viscosity low. This product is especially effective for use in automotive systems with aluminum and wood stains with matting or iron oxide pigments. It is post-addable with low shear.

DISPARLON® AQ-870 is a polyamide based rheology control agent for waterborne systems. A 3-D network structure is formed to prevent sagging and pigment settling. AQ-870 can be easily added into systems with a dissolver.

DISPARLON® UVX-188 is an excellent defoaming additive based on special vinyl polymers. Specially designed for defoaming of epoxy UV coatings imparting excellent air-release at any stage from coating manufacturing to film forming.

DISPARLON® OX-70 is a silicone-free, acrylic surface control additive that provided strong defoaming and leveling properties Particularly effective in high-viscosity paints which require a strong defoaming agent, such as epoxies, floor coatings and multi-component systems.

NACURE® 5225 is an amine neutralized Dodecylbenzenesulfonic acid (DDBSA) catalyst. Advantages over blocked p-TSA catalysts are viscosity stability and solubility.