KIWO STENCIL REMOVER 1:20/1:50 - Equipment

Knowde Enhanced TDS

Identification & Functionality

Features & Benefits

Applications & Uses

Markets: HI&I Care
Applications: HI&I Care — Home Care
Surface Care
HI&I Care — Institutional & Industrial Care
Industrial Cleaning
Application Area: Equipment,
Screen,
Stencil
Application Method: Brush,
Spray
Application: Apply the diluted STENCIL REMOVER 1:20/1:50 concentrate solution with a soft, clean brush evenly on both sides of the screen after the screen has been carefully cleaned of ink residue. Rub the screen gently with a brush to dissolve the emulsion.

After approximately 2 minutes, rinse thoroughly with a strong water spray. A high pressure water spray (1000 - 2000 psi, 40 - 60 bar) may be required for highly water resistant emulsions. Prolonged reaction time may result in reverse effects and does not help in the de-coating process. Rather, rinse the screen and reapply fresh STENCIL REMOVER 1:20/1:50 concentrate.

Ensure that the STENCIL REMOVER 1:20/1:50 concentrate solution does not dry on the screen. This can lead to a hardening of the emulsion and the resulting emulsion residues will be extremely difficult to remove.

For automatic equipment a dwell time of 60 -120 seconds after applying the de-coating solution is sufficient. If not all emulsion is removed, a second reclaiming cycle should be used to completely remove the emulsion.

Properties

Safety & Health

Personal Protection: It is recommended to wear protective glasses and gloves.
Environmental Protection: STENCIL REMOVER 1:20/1:50 concentrate can be eliminated through biological decomposition in adapted waste water treatment plants. The working solution can generally be emptied into the drains. Consult local authorties for local regulations.

Packaging & Availability

Storage & Handling