Products

Suitable for natural and synthetic rubber and latex, being a good secondary accelerator of kinds of thiazole, it is used with other accelerators to the continuous vulcanization. TMTD is regulated for use in articles in contact with food as specified under FDA 21 CFR177.2600, 175.105 and under BgVV XXI, Categories 1-4 and “Sonderkategorie”.

A good delayed action accelerator, suitable for natural and synthetic rubber and tire rubber products, able to improve the physical and mechanical properties of rubber products. CBS is regulated for use in articles in contact with food as specified under FDA 21 CFR177.2600 and under BgVV XXI, Category 4.

Rubber accelerator MBTS Used with other accelerators in tires, rubber belts and so on. MBTS is regulated for use in articles in contact with food as specified under FDA 21 CFR177.2600, 175.105 and under BgVV XXI, Categories 1-4.

Konson® accelerator MTT is a thiazole heterocyclic compound containing active sulfur atoms, which cross-links halogen-containing polymers. It is suitable for vulcanization cross-linking of CIIR and CR,especially as a highly effective accelerator for CR. Compared with NA-22, Konson® accelerator MTT maintains the good physical properties and aging resistance of NA-22 vulcanized CR, and also improves the scorch performance and operation safety of the rubber compound. Also combines faster curing characteristics. Konson® accelerator MTT is easy to disperse in rubber, no pollution, non-discoloring . It is usually used in the manufacture of cables, tapes, rubber shoes, tires, and bright-colored products.

Antioxidant 168 is a secondary antioxidant with excellent resistance to extraction by water, low volatility and high heat stability. It can effectively decompose hydroperoxides produced during the processing of polymeric materials. It isn’t usually used alone,compounded with hindered phenolic primary antioxidants such as Antioxidant 1010, to improve thermostability of polymer during the processing. There are over ten kinds of blends of Antioxidant 168 with phenolic antioxidants, widely use in the polymer materials, such as polylefins (eg. Polyethylene, polypropylene etc.), polyamide, polycarbornate, ABS and so on. The product has good effect with HALS

As a kind of super accelerator used to natural rubber, styrene-butadiene rubber. Commonly, using with some other kind of accelerators such as benzothiazole, sulfenamide. A fast velocity at vulcanizing temperature can be obtained, and intensile can be increased. Suitable for making inner tube of tires, soft tube, isolating layer of wire and cable, etc.. Don’t use for manufacturing the products contacting with foods. TDEC is regulated for use in articles in contact with food as specified under BgVV XXI, Category 4.

It acts as middle-speed accelerator, suitable for natural and synthetic rubber, and also can be used as activator for kinds of thiazole, thiuram and sulfenamide. It acts as plasticizer and plastic-divider on chloroprene rubber, especially suitable for rubber products such as tire, rubber shoes, and so on. DPG is regulated for use in articles in contact with food as specified under FDA 21 CFR177.2600 and under BgVV XXI, Categories 3-4.

Rubber Accelerator DPTT is a Light yellow powder，non-toxic and indorous. Soluble in chloroform, benzene, acetone, carbon disulfide, a little soluble in gasolind and carbon tetrachloride, insoluble in water and dilute alkali.

Antioxidant MB can effectively protect the pollution of copper and deal with the bad effect of over-vulcanization. It has an acation of delay to the accelerator M, DM, TMTD, etc. There are better actions when it is used with antioxident. Change less in color, it can be used in wire, cable and transparent or color rubber products and it also can be used as heat stabilizer of polyethylene and polypropylene.

A fast curing accelerator with a delayed action, especially suitable for the basic furnace carbon black natural rubber and synthetic rubber, able to improve the physical and anti-aging properties of rubber, also be used as tire rubbers.

A delayed action accelerator of vulcanization for natural and synthetic rubber. The speed of vulcanization is similar to CBS’s, but it’s delaying is larger than the CBS. There is little pollution and the color is changeless. It can be used as rubber products of tire.

A non-color degradation and non-staining supper accelerator for rubber, it is used in making cables, tires, rubber hoses and belts, brilliant and transparents, rubber shoes and products of heat resistance, etc.. TMTM is regulated for use in articles in contact with food as specified under FDA 21 CFR177.2600, 175.105 and under BgVV XXI, Categories 1-4 and”Sonderkategorie”.

A overspead accelerator for natural and synthetic rubber and latex. Curing active temperature is low. It can substitute for ZDBC、ZDEC、PZ, ect.. Operating safety is much better. Specially , it will not produce cancer-causing nitrosamize during the rubber manufacturing process , and it can be used as excellent activator to kinds of thiazole. Appropriate matching quantity of Zine oxide and sulfur when using , and aliphatic acid is not necessary .it can be added directly into rubber mass and also can be added into latex as component part. ZBEC is regulated for use in articles in contact with food as specified under FDA 21 CFR 175.105,177.2600 and under BgVV XXI, Categories 1-4 and”Sonderkategorie”.

Antioxidant 1010 is the typical representative of hindered phenol antioxidants, non-poisonous, nondiscolouring as well as nonstaining and is an excellent top-quality approved in international. It is widely used in a variety of polymer materials, such as polypropylene, polyethylene, polyester, polyrethane, polystyrene, polyxymethylene, PBT, ABS, polyamide, synthetic rubber and so on. It is also a high grade antioxidant for natural and synthetic oil..

A fast curing accelerator for natural and synthetic rubber and latex. It is more active than rubber accelerator ZDC in dry rubber. The latex contained accelerator ZDBC can’t be prevulcanized in a week. It is an excellent activator of thiazole kinds accelerator. It can be used as antioxidant in the mixing rubber and can improve the anti-aging properties. Non color degradation, non-staining and easy dispersion in rubber process. ZDBC is regulated for use in articles in contact with food as specified under FDA 21 CFR175.105, 178.2010, 175.300, 177.1210, 177.2600 and under BgVV XXI, Categories 1-4 and”Sonderkategorie”.

Vulcanizing Agent DTDM is used as the rubber accelerator and vulcanized agent of natural rubber, synthetic rubber. Under the curing temperature, it can release activing sulfur, effective sulfur content is about 27%. It has operating safety, curing speed is slow when it is used alone. The curing speed can be arised when used with thiazole, thiuram, thiocarbamate. There are many advantages, such as, no-spray, no-pollution, no-discolor, easy to disperse. It is especially suitable to butadiene rubber. Mainly it is used to manufacture tires, inner tube, rubber beltl, heat-resistance rubber products, etc.. DTDM is regulated for use in articles in contact with food as specified under FDA 21 CFR177.2600, 175.105 and under BgVV XXI, Category 4.

A universal rubber accelerator, mainly is used in tires, rubber shoes and other rubber articles. It is not used in rubber bags for food because of its bitterness. MBT is regulated for use in articles in contact with food as specified under FDA 21 CFR177.2600, 175.105, 176.300 and under BgVV XXI, Categories 1-4 and “Sonderkategorie”.

Antioxidant BHT is widely applied to antioxygen and antioxidant additive of industrial oils.It is the antioxidant additive of plastics and rubber; antioxidant stabilizer of white or tint products, lubricating oil, secondary operation gasoline, paraffins, mineral oil, polypropylene, polyethylene, polystyrene, ABS resin, polyester, cellulose resin, foamed plastic, natural rubber and synthetic rubber. It is non-pollutant antioxidant stabilizer for BR, butadiene styrene rubber, neoprene, chemigum, butyl rubber, transformer oil, latex products, PU leather sizing agent, polyether and top-grade oil paint..

A kind of amine antioxidant, the property of anti-heat oxide is good. It is suitable to nature rubber and variety of synthetic rubbers except chloroprene rubber. The effecting is invisible to protect curved fatigue and ozone, usually use it with other antioxidant that can protect curved fatigue and ozone. It is widely used to manufacture tires, rubber tuber, belts, shoes, fiber, normal industrial rubber products, also latex products. It is known as a stabilizer which used to polyisopentadiene rubber, butadiene rubber, butadiene styrene rubber. It is able to inhibit harmful metals.

It is an antioxidant used for rubber products with high efficiency, low poison and low solvent-extraction amount. Also used as stablizer in synthetic rubber. It’s main used in tire, rubber shoes, belt, hoses automotive mounts so on. IPPD is regulated for use in articles in contact with food as specified under FDA 21 CFR 177.2600 and under BGVV XXI, Categories 3-4.

A fast curing accelerator for natural, synthetic rubber and latex, it can be used as accelerators of butyl rubber, acrylonitrile-butadiene rubber and EPDM rubber, non-toxic, inodorous, stainless and changeless in colors on products, suitable for coated fabric,. It had wonderful effect in the products of EPDM rubber and butyl rubber. ZDMC is regulated for use in articles in contact with food as specified under FDA 21 CFR177.2600, 178.3120 and under BgVV XXI, Categories 1-4 and “Sonderkategorie”.