Products

PREPREG system BD (epoxy resin) are based on modified epoxy resins with high impact strength and excellent dynamic properties. They can be processed into high-strength structural components using all common methods. The hardening range is between 85 ° C and 140 ° C ; the max. heat resistance is 125 ° C . The delivery program with fabric, laid and unidirectional reinforced PREPREGS allows the load-based design of your components.

PREGNIT TP-AC is high gloss, scratch resistant.

PREGNIT TP-PA12 has high strength, rigidity and toughness.

PREGNIT TP-PE has high resistance to acids, Alkalis and chemicals.

PREGNIT TP-PP is resistant to non-oxidizing Acids and alkalis.

PREPREG Low temperature, system BX (epoxy resin) are based on modified epoxy resins with an extremely wide curing range from 55 ° C to 185 ° C and meet the requirements of a low-pressure / low-temperature PREPREG. The BX system is suitable for the production of structural components as well as fiber composite tools with a heat resistance of up to 195 ° C. The processing can take place according to all common methods.

PREPREG system HH (polyimide resin) are based on a high temperature resistant polyimide resin . Its processing is hot pressing or PREPREG winding.

PREPREG system SG (silicone resin) are based on a silicone resin. Its Processing is hot pressing or prepreg winding.

PREPREG system PD (phenolic resin) are based on a modified phenolic resin system with excellent fire protection properties .

PREGNIT TP-PC is a transparent, dimensionally stable, impact resistant, flame retardant possible according to UL94-VO, printable.

PREPREG system BE (epoxy resin) are based on a temperature- resistant modified epoxy resin . Its processing is hot pressing or PREPREG winding. Its tack has no to little stickiness.

PREGNIT TP-PA has high strength, rigidity and toughness.

PREGNIT TP-PU is printable, suitable for backing splash, back-foaming, Deep drawing and thermoforming, high wear resistance.