Knowde Enhanced TDS
Identification & Functionality
- CASE Ingredients Functions
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- CASE Ingredients Features
- Key Features
- Based on BioLoop technology
- 100% renewable
- Powerful dispersing properties
- No flocculation
- VOC free
- Fast particle size reduction
- Biodegradeable
- Low ecotoxicity
- No skin or eye irritancy
Applications & Uses
- Applications
- Compatible Substrates & Surfaces
- Coating Type
- Ink & Toner Type
- Applications - TiO₂ Dispersions
- Decorative paints
- Inkjet
- Paper
- Industrial paints
- Coil coatings
Properties
- Physical Form
- Odor
- Characteristic
- Appearance
- Light amber liquid
- Soluble in
- Water, Ethanol, Acetone, Butyl acetate, MEK, Isobutanol, Dowanol PMA, Dowanol DPM, N-butyl glycol, Dowanol PM
- Insoluble in
- Mineral oil, White spirit, Ethyl acetate, Xylene, Shellsol A / Solvesso 100, Soyabean methyl ester, DINP, Soyabean oil
- Dispersible in
- MIBK
- Typical Properties
Value | Units | Test Method / Conditions | |
Solids Content | 74 - 76 | % | — |
Composition | Bioloop dispersant | — | — |
Viscosity (at 25°C) | 539.0 | cPs | — |
Specific Gravity (at 20°C) | 1.08 | — | — |
Pour Point | -8.0 | °C | — |
Flash Point | min. 150 | °C | — |
Surface Tension (0.1% Aqueous) | 39.2 | mN/m | — |
Technical Details & Test Data
- Titanium Dioxide Dispersions
Titanium dioxide dispersions and slurries are notoriously difficult to produce at high solids concentrations due to the high density of the TiO₂. This high density causes destabilization and eventually separation at the top of the dispersion. Lansperse BIO868 helps to stabilize high active dispersions by maintaining good rheology control, but with light agitation the rheology drops immediately to help in the handling and processing within the end application. This property is noticeable for high solids loading between 60 - 70%, at lower solids levels the dispersion is a nice free-flowing liquid.
Formulation Examples
% Titanium Dioxide 65 Lansperse BIO868 3.75 Biocide as required Dfoam AX1 as required Water 31.25 Method of manufacture :
- Prepare a millbase
- Manufacture the dispersion using an Eiger Torrance bead mill
Note: An alternative method is to use a high shear homogeniser
Rheology over timeViscosity - Din Cup 4
Initial 9 sec Week 1 11sec Week 2 23 sec Week 4 93 secs After 5 months storage the dispersion is still mobile and pourable.
Particle size over time - micronsD90 particle size
10 mins 0.448 20 mins 0.447 40 mins 0.448 60 mins 0.45 Extremely fast reduction in particle size noticed even after 10 mins
Conclusion : Lansperse BIO868 offers fantastic dispersing properties for titanium dioxide dispersions and is far superior than many of the commercially available synthetic versions available in the marketplace. It gives a high solids loading along with good rheology and fast reduction of particle size.
Packaging & Availability
- Packaging Type
- Packaging Information
Lansperse BIO868 can be supplied in IBC’s, 200kg or 25kg nett drums.
Storage & Handling
- Storage Information
Stainless steel, polyethylene or glass lined equipment is necessary for the storage of Lansperse BIO868 in order to prevent corrosion and subsequent contamination. This material can separate on standing and at low temperatures. May require agitation and warming prior to use.