company tower banner

Products

Lawter

7 Products found on Lawter in Can Coatings

TDSWith TDS

ULTRAFINE™ 1000A banner

ULTRAFINE™ 1000A

Functions:Surface Modifier
Chemical Family:Waxes, Polyolefins, Polyethylene Waxes, Polyethylenes
End Uses:Powder Coating, Coil Coating, Waterborne Ink, Offset Ink, Waterborne Coating, Flexography Ink, Gravure Ink, Solventborne Coating, Solventborne Ink
Features:Recoatability, Slip Resistance, Abrasion Resistance, Blocking Resistance, Mar Resistance

Ultrafine™ 1000 A is a finely micronized polyethylene wax powder recommended when maximum rub and mar resistance, block resistance, slip, re-coatability and elevated processing temperatures are required. The average particle size of Ultrafine 1000 A is 7 microns with a narrow distribution of particle sizes for ease of dispersion and uniformity during processing. Addition levels range from 0.5 to 3%, depending upon application requirements.

OPTIRUB™ OP A banner

OPTIRUB™ OP A

Functions:Surface Modifier
Chemical Family:Waxes, Polyolefins, Polyethylene Waxes, Polyethylenes
End Uses:Other Ink Types, Coil Coating, Waterborne Ink, Waterborne Coating, Flexography Ink, Gravure Ink
Features:High Gloss, Abrasion Resistance, Good Lubricating Properties, Blocking Resistance, Improved Slip

Optirub™ OP A is a micronized, oxidized polyethylene that easily disperses into aqueous systems. Optirub OP A is processed to a 12 micron average particle size and formulated to give excellent rub resistance, lubricity, gloss and anti-blocking properties. Addition levels range from 0.5 to 2%, depending upon application requirements.

OPTIRUB™ SP1 A banner

OPTIRUB™ SP1 A

Functions:Surface Modifier
Chemical Family:Waxes, Polyethylene Waxes, Polyethylenes
End Uses:Powder Coating, Coil Coating, Waterborne Ink, 1K (1 component) Coating, Offset Ink, Waterborne Coating, Flexography Ink, Gravure Ink, Solventborne Coating, Solventborne Ink
Features:Abrasion Resistance, Good Lubricating Properties

Optirub™ SP1 A is a finely, micronized blend of tough polyethylene wax and premium grade PTFE. Optirub SP1 A is processed to a 6 micron average particle size and formulated to give a high degree of surface lubricity and rub resistance in inks and coatings. Addition levels range from 0.5 to 3%, depending upon application requirements.

ULTRAFINE™ 1W A banner

ULTRAFINE™ 1W A

Functions:Surface Modifier, Binder & Resin
Chemical Family:Waxes, Fluoropolymers
End Uses:Varnishes, Powder Coating, Coil Coating, Waterborne Ink, Offset Ink, Waterborne Coating, Radiation Curable Ink, Radiation Curable Coating
Features:Mar Resistance, Heat Resistance, Abrasion Resistance, Blocking Resistance, Radiation Resistance

Ultrafine™ 1W A is a polytetrafluoroethylene fine powder used to improve surface properties of printing inks and coatings. Ultrafine 1W A is designed for lubricity, abrasion and heat resistance and may be used in combination with other waxes for the most effective balance of cost and performance. Recommended usage level is 1 to 4%.

OPTIRUB™ PC A banner

OPTIRUB™ PC A

Functions:Surface Modifier
Chemical Family:Polyethylene Waxes, Polyethylenes
End Uses:Waterborne Ink, Offset Ink, Waterborne Coating, Flexography Ink, Gravure Ink, Solventborne Coating, Solventborne Ink
Features:Excellent Adhesion, Slip Resistance, Abrasion Resistance, Good Lubricating Properties, Blocking Resistance, Good Gloss Retention, Improved Slip, Mar Resistance

Optirub™ PC A is a finely micronized, polyethylene and carnauba blend processed to an 8 micron average particle size. Optirub PC A is recommended for applications where gloss retention, clarity, or inter-coat adhesion is important. In addition, Optirub PC A provides an excellent combination of slip, wet scuff, mar and block resistance. Optirub PC A is not recommended for recoating, imprinting, gluing, and die-stamping applications. Recommended usage level is 1 to 3%.

POLYSPERSE™ A banner

POLYSPERSE™ A

Functions:Surface Modifier
Chemical Family:Waxes
End Uses:Gravure Ink, Solventborne Coating, Coil Coating, Waterborne Ink, Solventborne Ink, Offset Ink, Other Ink Types, Waterborne Coating, Powder Coating, Flexography Ink
Features:High Gloss, Abrasion Resistance

Polysperse™ A is a linear hydrocarbon produced by the Fischer-Tropsch process. Polysperse A has a unique spherical morphology and narrow distribution of particles for ease of dispersion and uniformity during processing. Polysperse A exhibits low surface tension, exceptional surface slip and smoothness, rub resistance, gloss, and non-marking properties. Addition levels range from 0.5-3%, depending upon application requirements.

ULTRAFINE™ 1W-LS A banner

ULTRAFINE™ 1W-LS A

Functions:Surface Modifier
Chemical Family:Waxes, Fluoropolymers
End Uses:Powder Coating, Coil Coating, Waterborne Ink, Offset Ink, Waterborne Coating, Radiation Curable Ink, Radiation Curable Coating
Features:Heat Resistance, Abrasion Resistance, Blocking Resistance, Radiation Resistance, Mar Resistance

Ultrafine™ 1WLS A is a premium polytetrafluoroethylene fine powder used to improve surface properties of printing inks and coatings. Ultrafine 1WLS A is designed for lubricity, abrasion and heat resistance and may be used in combination with other waxes for the most effective balance of cost and performance. Ultrafine 1WLS A is characterized by a slightly broader particle size distribution. Recommended usage level is 1 to 4%.