Lubriplate

Lubriplate® Auto/Marine Guard ISO Grade 7, Mineral oil is a moisture displacement, penetrating fluid and fogging oil.

Lubriplate® Dexron III/Mercon ATF ISO Grade 32, Automatic Transmission Fluid is a newly developed premium fluid fully qualified to cover current requirements for both General Motors and Ford. Dexron III is a General Motors trademark for qualified automatic transmission fluids. Mercon covers all automatic transmissions for Ford model year 1988 and after. LUBRIPLATE Dexron III/Mercon is designated as make-up and/or refill fluids to meet respective car warranties.

Lubriplate® GPO Motor Oil SAE 40, Motor Oil is a high-quality diesel engine oil designed for use in a wide variety of applications, including off-highway diesel equipment, farm machinery, marine engines, 2-stroke cycle diesel engines (in the appropriate viscosity grades) and mixed commercial fleets. It may be also used in some heavy duty manual transmissions in trucks and busses.

Lubriplate® GPO Motor Oil SAE 10W-30, Motor Oil is an engine oil developed for use in four-stroke cycle diesel engines designed to meet 2007 and later EPA on-highway exhaust emissions standards. It is specially formulated to protect exhaust after treatment devices such as diesel particulate filters (DPFs), diesel oxidation catalysts (DOCs) and selective catalytic reduction (SCR) systems. It is backward serviceable for use in pre-2007 diesel engines and may be used in mixed fleets with both diesel and gasoline-fueled vehicles.

Lubriplate® GPO Motor Oil SAE 15W-40, Motor Oil is a heavy duty, extra high performance multi-grade engine oil that provides excellent protection in diesel fuel and gasoline engines over a wide range of operating conditions and performance demands.

Lubriplate® 405 Cutting Oil ISO Grade 46, Mineral oil is especially recommended for use on low or high carbon steels, alloys and stainless steels where difficult conditions of service are encountered. The unusually high extreme pressure content of this active sulfur product provides optimum results in prolonged tool life, improved finish, more accurate cuts, greater production and reduced labor cost. Not recommended for brass, bronze, copper or aluminum. It is an outstanding dark pipe threading oil.

Lubriplate® Cut-N-Cool ISO Grade 68, Mineral oil combines the machining efficiency of a cutting oil with the cooling ability of water all in one product. LUBRIPLATE CUT-N-COOL is a heavy duty water extendable sulfur-chlorinated metalworking coolant formulated to offer outstanding performance in difficult machining and grinding operations involving hard-to-work metals such as stainless steel, tool steels and high nickel alloys. LUBRIPLATE CUT-N-COOL may be used on all metals except magnesium, copper and some bronze alloys, which may be stained. LUBRIPLATE CUT-N-COOL will perform as well as straight oil in most applications.

Lubriplate® Darl No. 2 ISO Grade 46, Mineral oil is a combination sulfurized-fatty type mineral oil produced under exacting conditions, offering superior tool life and finish as a multi-purpose dark cutting oil. LUBRIPLATE Darl No. 2 Cutting Oil is recommended for all types of machining operations, working with both ferrous and non-ferrous metals. It is especially recommended for difficult low carbon steel work, such as tapping, threading, broaching, gear cutting and piercing. Ideal for working with a wide variety of metals such as carbon steel, copper, brass and aluminum. One of the special features of LUBRIPLATE Darl No. 2 is that it is non-corrosive. This product will not stain or discolor copper, brass or aluminum. Also, it does not harm bearings in machines having leakage of cutting oil into the lubricating system, such as automatic screw machines.

Lubriplate® Flokool XX Cutting Oil ISO Grade 32, Mineral oil is a premium, heavy-duty cutting oil of the sulfur saponifiable type. LUBRIPLATE FloKool XX Dark Cutting Oil is medium in viscosity, possesses the proper type and percentage of anti-weld properties.

Lubriplate® Metal Working Fluid ISO Grade 32, Mineral oil is a specially developed product suitable for a variety of metal working applications.

Lubriplate® No. 35 Soluble Oil ISO Grade 46, Mineral oil is a soluble oil concentrate. This product was designed to be extended with water for the machining and grinding of virtually all metals except magnesium.

Lubriplate® Biobased Green Hydraulic Oil 32 ISO Grade 32, Vegetable oil is VGP compliant Hydraulic Fluid are ultimately biodegradable vegetable based formulas that replace mineral oil based hydraulic fluids. They are formulated to perform in hydraulic systems that require Anti-Wear (AW), anti-rust, anti-oxidation, anti-foam and demulsibility properties.They are highly inhibited against moisture and rusting in both fresh and sea water and pass both A and B Sequences of the ASTM D-665 Turbine Oil Rust Test.