Lubriplate Biobased Green Hydraulic Oil 32 ISO Grade 32, Vegetable oil

Identification & Functionality

Base Oil Type: Vegetable Oil
Product Type: Hydraulic Fluids,
Oil
Technologies: Ready-to-Use Products
Product Families: Ready-to-Use Products — Fluids & Lubricants
Lubricants & Oils

Features & Benefits

Labeling Claims: Bio-based,
Biodegradable,
Low Toxicity
Ready-to-Use Product Features: Anti-Wear Properties,
Biodegradable,
Corrosion Resistant,
Defoaming,
Excellent Moisture Resistance,
Low Toxicity
Characteristics: Very little wear was encountered, 0 to 25mg (Pass), in accelerated biobased tests using Denison T-5D, Vickers 20VQ, 35VQ-25 (M-2950-S) and V-104C (ASTM D-2882) pump stand tests at pressures and temperatures ranging from 2000 to 3000 psi and from 150º to 210ºF.

The anti-wear performance exceeds the requirements for US Steel 126 and 127, load stage 10 in the FZG (DIN 51354), DIN 51524 and GM (LS-2).

They also meet the requirements for ashless GL-3 gear oils in reduction units and gear sets where they meet the viscosity ranges.

These fluids meet or exceed Federal Specification A-A-59354 Superseding MIL-H-46001D.

Base oils and additives in these products pass and exceed the acute toxicity (LC-50) criteria adopted by the US Fish and Wildlife Service and the US EPA.

LUBRIPLATE Biobased Green Hydraulic Fluids are ENVIRONMENTALLY RESPONSIBLE lubricants that are formulated from renewable agricultural plant resources.

Applications & Uses

Markets: Industrial
Applications: Industrial — Chemical & Industrial Manufacturing
Equipment & Parts
Application Area: Pump
Applications: LUBRIPLATE Biobased Green Hydraulic Fluids are designed for use in mobile and stationary hydraulic vane, piston and gear-type pumps and have shown to have exceptional anti-wear performance.

LUBRIPLATE Biobased Green Hydraulic Fluids should be used in hydraulic systems where low toxicity and BIODEGRADABILITY properties are required.

Properties

	Value	Units	Test Method / Conditions
4-Ball Wear	0.3 - 0.4	—	ASTM D-4172
FZG Test	12.0	—	ASTM DIN 51354
Specific Gravity	0.88	—	ASTM D-287
Viscosity (40°C)	30.87	cSt	ASTM D-445
Hydrolytic Stability: Copper Wt. Loss	0.0139	mg	ASTM D-2619
Biodegradation Classification	Ultimate PW1	—	ASTM D-5864
Insoluble	0.001	%	—
Change in Acid No.	0.16	—	—
Water Layer	3.0	—	—
Syn. Sea Water	Pass	—	—
Copper Appearance	1B	—	—
Copper Corrosion	1B	—	ASTM D-130
Pour Point	-30.0	°C	ASTM D-97
Viscosity (100°C)	6.9	cSt	ASTM D-445
Demulsibility, Oil/Water/Emulsion (10 mins)	40/40/0	ml	ASTM D-1401
Rust Prevention: Distilled Water	Pass	—	ASTM D-665
Fire Point	260.0	°C	ASTM D-92
Flash Point	236.0	°C	ASTM D-92
Foam Sequence I, II, III (10 min)	0 Foam	—	ASTM D-892

Regulatory & Compliance

Packaging & Availability

Lubriplate® Biobased Green Hydraulic Oil 32 ISO Grade 32, Vegetable oil