Knowde Enhanced TDS
Identification & Functionality
- Base Oil Type
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Advantages
- Excellent Anti-Wear Performance- Exceptional load-carrying capabilities and specially formulated (with no zinc or other metal additives) to provide effective corrosion protection and anti-wear performance in hydraulic systems. Rated as anti- wear (AW) fluids according to ASTM D7043 testing and FZG testing, which means the potential for greater operating reliability, less downtime, and lower maintenance costs.
- Clean, Long-Lasting Operation - When proper equipment maintenance procedures are followed, the Bio-Synxtreme HF series offer a long service life and operating reliability, lower maintenance costs, and reduced overall downtime.
- All Season Performance- High viscosity indices and low pour points, allowing year-round usage and eliminating seasonal changeovers.
- Biodegradability- Readily biodegradable according to OECD 301F
- Non-Sheening- Does not cause a sheen or discoloration on the surface of the water or adjoining shorelines that would violate local water quality standards.
- Aquatic Toxicity- "Practically Non-Toxic" to fish and other aquatic wildlife according to the U.S. Fish and Wildlife Service hazard classification.
Applications & Uses
- Applications
- Application Area
- Compatible Substrates & Surfaces
- Compatibility
- Other Hydraulic Fluids - Not compatible with hydrocarbon-based hydraulic fluids. As with any fluid conversion, recognized industry procedures including system cleanup and flushing should be followed.
- Paints PAG- based fluids show some solvency for common oil-based paints but minimal solvency for many epoxy-based paints.
- Elastomers- Suitable for use with many elastomeric materials used in seals and gaskets. Compatible_elastomers_are: Viton,_ Kalrez, Silicone, Polysulfide, EPR, Butyl Rubber, Buna N, Fluoraz, EPDM Natural Black Rubber NaturalRed Rubber and Aflas.
- Plastics- Compatibility should be assessed for any plastic Components (such as reservoir sight glasses) exposed to a hydraulic fluid.
Properties
- ISO Viscosity Grade
- Typical Properties
Value | Units | Test Method / Conditions | |
35 VQ Vickers Vane Pump Test | Pass | — | M-2950-S |
Aging Behavior | 1008.0 | hrs | DIN 51587 |
Aging Behavior (KOH/g) | 1.14 | mg | DIN 51587 |
FZG Visual Gear Test, | 12.0 | — | ASTM D5182 |
Specific Gravity (20°C) | 1.031 | — | ASTM D1298 |
Ash Content | 0.011 | % | ASTM D482 |
Average Wear | 8.0 | mg | M-2950-S |
Specific Heat | 0.476 | Cal/g/°C | ASTME1269 |
Stages Passed | 12.0 | — | ASTM D5182 |
Viscosity (40°C) | 35.4 | cSt | ASTM D445 |
Individual Cartridge Wear | 8,8,8 | mg | M-2950-S |
Initial Viscosity (40°C) | 36.8 | cSt | ASTM D5621 |
Viscosity Index | 194.0 | — | ASTM D2270 |
Irradiated Viscosity (40°C) | 36.9 | cSt | ASTM D5621 |
Last Non-seizure, 80 kg | 0.4 | mm scar | ASTM D2783 |
Last seizure, 126 kg | 2.75 | mm scar | ASTM D2783 |
Weight (20°C) | 8.57 | Ibs./gal. | — |
Weld Load | 160.0 | kg | ASTM D2783 |
Coefficient of Expansion (20°C) | 0.00078 | — | ASTM D1903 |
Coefficient of Expansion (55°C) | 0.0008 | — | ASTM D1903 |
Load Wear Index | 32.94 | — | ASTM D2783 |
V104 Vane Pump Test (total mg wear) | max. 10 | — | ASTM DT043 |
Vapor Pressure | max. 0.01 | mm HG | ASTM E1719 |
Viscosity (0°C) | 294.0 | cSt | ASTM D445 |
Copper Strip Corrosion | 1b, shiny | — | ISO 2160 |
Corrosion Protection (TORT) | Pass | — | ASTM D665A |
Pour Point | -74.2 (-59) | °F (°C) | ASTM D97 |
Viscosity (100°C) | 8.0 | cSt | ASTM D445 |
Fire Point | 304.0 | °C | ASTM D92 |
Flash Point-Cleveland Open Cup | 271.0 | °C | ASTM D92 |
Flash Point-Pensky Martens Closed Cup | 218.0 | °C | ASTM D93 |
Foam Test- Sequence llI, Initial Volume/ml | 10/0 | — | ASTM D892 |
Foam Test- Sequence I, Initial Volume/ml | 10/0 | — | ASTM D892 |
Foam Test- Sequence lI, Initial Volume/ml | 10/0 | — | ASTM D892 |
Regulatory & Compliance
- Certifications & Compliance
- VGP Compliance Statement
VGP Compliance Statement
The LUBRIPLATE BIO-SYNXTREME HF Series are Environmentally Acceptable Lubricants (EAL) according to the definitions and requirements of the US EPA 2013 Vessel
General Permit, as described in VGP Section 2.2.9
Safety & Health
- Environmental Data (Classified as “Practically Non-Toxic”)
Classified as "Practically Non-Toxic
- U.S. Fish &Wildlife Service Classification Based on inherent properties of the fluid and testing following the:
- U.S. EPA. Ecological Effects Test Guidelines, OPPTS 850.1010, Aquatic Invertebrate Acute Toxicity Test, Freshwater Daphnids
- U.S. EPA. Ecological Effects Test Guidelines, OPPTS 850.1035, Mysid Acute Toxicity Test
- U.S. EPA. Ecological Effects Test Guidelines, OPPTS 850.1075, Fish Acute Toxicity, Freshwater and Marine
- U.S. EPA. Ecological Effects Test Guidelines, OPPTS 850.1000, Special Considerations for Conducting Aquatic Laboratory Studies
- OECD Series on Testing and Assessment, No. 23, Guidance Document on Aquatic Toxicity Testing of Difficult Substances and Mixtures
Packaging & Availability
- Packaging
- 5 Gallon Pail
- 55 Gallon Drum