Madewell

Madewell® 1312S™ is a heavy duty, 100% solids, two component epoxy coating product. It is used for both new construction and maintenance of steel and concrete surfaces in pools, tanks, sumps, trenches, decks, and pipe interiors. Madewell® 1312S may be used as a topcoat over other Madewell® coating systems to add color and/ or seal the surface. M Madewell® 1312S protects surfaces against chemical attack under immersion, spill, and splash conditions, and impact and abrasion damage caused by rough use or heavy traffic. It is normally applied at a nominal thickness of 10 to 20 mils in two coats. Its monolithic construction resists moisture, chemical, and bacteria penetration while also being attractive and easy to clean. Its free spreading characteristics, fast set time, and ease of cleanup help to minimize labor costs and down time.

Madewell® 525™ provides excellent performance for structures exposed to ultraviolet light. It is used for both new construction and rehabilitation of concrete surfaces on decks and floors and in freshwater and saltwater aquariums and pools. Madewell® 525 is typically used as a topcoat over Madewell® 1312S epoxy coating (including broadcast quartz and vinyl flake) to provide ultraviolet light resistance and additional durability and corrosion protection. M Madewell® 525 is a polycarbamide based, high solids coating that can be cured at room temperature for a variety of plant, shop, and field applications. In addition to superior UV stability, Madewell® 525 offers dramatically improved weather, corrosion, and chemical resistance. Because of its low permeability to oxygen, water, and chlorides, Madewell® 525 remains unchanged after years of exposure to the elements allowing it to outperform such common coatings as alkyds, chlorinated rubber, acrylics, and siloxanes on a wide variety of substrates and service environments. Normally applied at 8 to 15 mils dry film thickness (DFT) in a single coat, its free spreading characteristics, fast set time, and easy cleanup help to minimize labor costs and down time.

Madewell® 927™ is a two component penetrating epoxy primer and sealer for porous substrates such as wood, concrete, and other cementitious surfaces. Madewell® 927 is 100% solids, thereby providing a safer working environment. It also has a very low viscosity, which permits easy mixing, application, and deep penetrating action into porous surfaces. Madewell® 927 can be applied to damp surfaces; its unique chemistry permits rapid displacement of substrate moisture and excellent adhesion. In addition, the applied system increases the tensile, compressive, and impact strengths of the substrate. It may be used in a variety of applications, including the sanitary sewer, pulp and paper, chemical processing, steel, metal finishing, and refining industries. Madewell® 927 is recommended as a concrete primer under many Madewell® epoxy coating systems.