Browse Products by Market

Browse Products by Technology

The Mainstay Composite Liner was originally developed by United States Steel (USS) Corporation as a process for lining uncured reinforced concrete pipe. The USS Chemicals division performed the first commercial application of Mainstay in 1962. Several million square feet of Mainstay were applied by U.S. Steel crews over the following nine years. In 1971, U.S. Steel decided to divest its coatings interests, including Mainstay. Madewell Products Corporation was established soon thereafter to manufacture Mainstay products. Over the last 50 years, Mainstay brand products have been used to line concrete surfaces in multiple markets throughout the U.S. and abroad. Today, Madewell Products manufactures a variety of cementitious and epoxy products. Madewell also manufactures specialized application equipment for use with these materials. Madewell's headquarters is located in Alpharetta, Georgia.

Privacy

Terms & Conditions

Terms of Sale

Cookie Policy

Madewell® flake and quartz epoxy flooring systems provide finishes that are long lasting, durable, attractive, and easy to clean.

Madewell

Mainstay® Industrial Composite Liner can be used to restore and protectconcrete structure in industrial environments. This system consists of a high strength restoration mortar used to smooth or restore new or deteriorated concrete. The mortar is immediately topcoated with a 100% solids epoxy coating to allow simultaneous curing of the two products, resulting in an ultra strong bond between materials. Once cured, a vinyl ester resin enhanced with glass flake reinforcement is applied to provide superior corrosion resistance to a wide variety of aggressive chemicals.

Mainstay

Mainstay® ML-72P™ is a blend of special cements, microsilica, thermoplastic fiber, densifiers, admixtures, and other modifiers that produces a high strength, low shrinkage, and low permeability mortar. Mainstay® ML-72P produces excellent adhesion to properly prepared concrete surfaces. Mainstay® ML-72P seals rough concrete surfaces, fills bugholes, and resists external hydrostatic water pressure. Mainstay® ML-72P is suitable for permanent water immersion service. M Mainstay® ML-72P can be used to smooth horizontal, vertical and overhead surfaces of new or deteriorated concrete structures such as pits, sumps, trenches, tunnels, culverts, bridges and piers. Mainstay® ML-72P may also be used to restore concrete structures that require protection by application of Madewell® or Mainstay® corrosion barrier coatings.

Mainstay® ML-72P™ Polymer Modified Sprayable Microsilica Cement Mortar

Mainstay® ML-72HP™ is a reinforced blend of portland cement, microsilica, densifiers, admixtures, and other modifiers that produces a high strength and low permeability mortar specifically designed for centrifugal application within underground concrete, brick and galvanized corrugated metal pipe (CMP). Mainstay® ML-72HP provides a uniform, waterproof surface that is extremely dense, abrasion resistant and highly impermeable, while providing excellent adhesion to the substrate. With superior compressive, flexural and tensile strengths, Mainstay® ML-72HP can help restore structural integrity to deteriorated underground concrete and corrugated metal pipe quickly and economically.

Mainstay® ML-72HP™ Horizontal Pipe Restoration Mortar

Mainstay® ML-72™ is a special blend of portland cement, microsilica, thermoplastic fiber, densifiers, admixtures, and other modifiers that produces a high strength and low permeability mortar for the rehabilitation of deteriorated concrete structures. Mainstay® ML-72 produces excellent adhesion to properly prepared new and existing concrete, brick, or steel surfaces. Mainstay® ML-72 can withstand corrosive environments with a pH of 3 or higher, restores structural integrity, seals rough, deteriorated surfaces, and resists external hydrostatic water pressure. Mainstay® ML-72 is suitable for permanent water immersion service. Mainstay® ML-72 can be used to repair vertical, horizontal, and overhead surfaces of deteriorated steel and concrete structures such as manholes, lift stations, wet wells, sewer pipes, culverts, pits, sumps, trenches, tunnels, bridges, piers, or any structure that has experienced deterioration from exposure to aggressive environments.


Mainstay® ML-72™ Sprayable Microsilica Restoration Mortar

Mainstay® 714™ Flake Glass Epoxy Novolac Vinyl Ester Coating is designed for application over steel and concrete substrates. Mainstay® 714 is resistant to a wide variety of chemical exposures including many strong organic and inorganic acids, solvents, alkaline chemicals, and some oxidizing agents. It is well suited for use in immersion, splash, and spill service. M Mainstay® 714 may be used as a topcoat over Mainstay® DS-5 100% Solids Epoxy Coating and Mainstay® ML-72 Sprayable Microsilica Restoration Mortar for concrete structures that require surface restoration as well as protection from aggressive chemical environments.

Mainstay® 714™ Flake Glass Epoxy Novolac Vinyl Ester Coating

Madewell® 1312S™ is a heavy duty, 100% solids, two component epoxy coating product. It is used for both new construction and maintenance of steel and concrete surfaces in pools, tanks, sumps, trenches, decks, and pipe interiors. Madewell® 1312S may be used as a topcoat over other Madewell® coating systems to add color and/ or seal the surface. M Madewell® 1312S protects surfaces against chemical attack under immersion, spill, and splash conditions, and impact and abrasion damage caused by rough use or heavy traffic. It is normally applied at a nominal thickness of 10 to 20 mils in two coats. Its monolithic construction resists moisture, chemical, and bacteria penetration while also being attractive and easy to clean. Its free spreading characteristics, fast set time, and ease of cleanup help to minimize labor costs and down time.

Madewell® 1312S™ 100% Solids Epoxy Coating

Mainstay® DS-5-S™ is a 100% solids, chemically modified epoxy coating that utilizes a unique, multi-component curing system that contributes to a number of superior properties: toughness, permanent flexibility, and improved chemical and temperature resistance. This system may be applied at thicknesses up to 50 mils in single or multiple applications, thereby reducing application costs. The absence of solvent reduces shrinkage, cracking, and disbonding and eliminates problems related to solvent entrapment. Mainstay® DS-5-S is particularly well suited for use as a topcoat over Mainstay® ML-72Sprayable Microsilica Restoration Mortar (see section on Application).

Mainstay® DS-5-S™ 100% Solids Medium Build Epoxy Coating

Madewell® 525™ provides excellent performance for structures exposed to ultraviolet light. It is used for both new construction and rehabilitation of concrete surfaces on decks and floors and in freshwater and saltwater aquariums and pools. Madewell® 525 is typically used as a topcoat over Madewell® 1312S epoxy coating (including broadcast quartz and vinyl flake) to provide ultraviolet light resistance and additional durability and corrosion protection. M Madewell® 525 is a polycarbamide based, high solids coating that can be cured at room temperature for a variety of plant, shop, and field applications. In addition to superior UV stability, Madewell® 525 offers dramatically improved weather, corrosion, and chemical resistance. Because of its low permeability to oxygen, water, and chlorides, Madewell® 525 remains unchanged after years of exposure to the elements allowing it to outperform such common coatings as alkyds, chlorinated rubber, acrylics, and siloxanes on a wide variety of substrates and service environments. Normally applied at 8 to 15 mils dry film thickness (DFT) in a single coat, its free spreading characteristics, fast set time, and easy cleanup help to minimize labor costs and down time.

Madewell® 525 Polycarbamide Coating

Mainstay® DS-5™ 100% Solids Epoxy Coating utilizes a unique, multi-component curing system that contributes to a number of superior properties: toughness, permanent flexibility, and improved chemical and temperature resistance. This system may be applied at thicknesses up to 125 mils in single or multiple applications, thereby reduc - ing application costs. The absence of solvent reduces shrinkage, cracking, and disbonding and eliminates problems related to solvent entrapment. Mainstay® DS-5 is designed for use in corrosive environments with a pH of 0.5 or lower and is typically used as a topcoat over Mainstay® ML-72 Sprayable Microsilica Restoration Mortar (see section on Application). Mainstay® DS-5 is particularly well suited for protecting sanitary sewer structures such as manholes, lift stations, wet wells, and sewage treatment plant structures.

Mainstay® DS-5™ 100% Solids High Build Epoxy Coating

Madewell® 927™ is a two component penetrating epoxy primer and sealer for porous substrates such as wood, concrete, and other cementitious surfaces. Madewell® 927 is 100% solids, thereby providing a safer working environment. It also has a very low viscosity, which permits easy mixing, application, and deep penetrating action into porous surfaces. Madewell® 927 can be applied to damp surfaces; its unique chemistry permits rapid displacement of substrate moisture and excellent adhesion. In addition, the applied system increases the tensile, compressive, and impact strengths of the substrate. It may be used in a variety of applications, including the sanitary sewer, pulp and paper, chemical processing, steel, metal finishing, and refining industries. Madewell® 927 is recommended as a concrete primer under many Madewell® epoxy coating systems.

Madewell® 927™ Penetrating Epoxy Primer/Sealer

Madewell Products Corporation

The Mainstay Composite Liner was originally developed by United States Steel (USS) Corporation as a process for lining uncured reinforced concrete pipe. The USS Chemicals division performed the first 

Madewell Products - Mainstay - Concrete - Reinforced - Liner

Website

Mainstay® DS-5-S™ 100% Solids Medium Build Epoxy Coating Technical Data Sheet

Mainstay® DS-5-S™ 100% Solids Medium Build Epoxy Coating Technical Data Sheet - Madewell Products Corporation - Knowde

Job Title

Shipping Terms

Name

and the data associated with it — permanently.

This is a Premium Feature

Changes to filters have not been applied.

Discard changes?

{userCompanyName} notice

In order to join {userCompanyName} on Knowde, you must use your business email address.

Business already on Knowde

{userCompanyName} requires all users on {companyName} to register with their business email address to ensure confidentiality and security.

{userCompanyName} requires registering your business email address

There's only a little ways to go.

Creating an account is free and the only way to directly download documents, order samples, request quotes and use direct messaging.

Quit Sign Up?

Tell us about {userCompanyName}

from concierge@knowde.com

Click the link in the email, or enter the 6-digit code

Verification email sent

Since you’re using a personal email address, we require proof to verify the information you have provided.

Please verify your account

Please go back and enter in an email address that is directly associated with a business.

Knowde is built for businesses

Also, using a personal email for creating your {companyName} account may require additional verification of your company details.

We recommend signing up with a work email address to get faster responses, especially when requesting samples, documents, and more.

Please enter your business email address below.  We’ll send you a confirmation code to quickly verify.

Enter your business email

{companyName} uses Knowde for account management so you can manage all of your sample requests, RFQs, orders and more in one place.

Knowde is for businesses, you may have a hard time receiving responses to your requests if you use a personal email address.

to {email}

We sent an email to {email}

Please click the link to reset your password

Check your email

Create a new password

Password expired

Sign in to {companyName}

Enter a new secure password

Change your password

Enter the email address associated with your account

Reset your password

If the email address you've entered is registered to a knowde account, you should receive instructions to reset your password soon. Remember to check your spam or junk folder as well.

Enter your password for

Use your Knowde password to sign in:

Please provide additional information to help us verify your company.

Terms and Conditions

Compare multiple products at once and find the best fit for your project needs.

Why is this important?

Enter your password

Unlock your account

Knowde is the world’s biggest marketplace to search for ingredients, polymers, and chemistry. You can:

Welcome to Knowde

View All Products

Cart

Please fix the following before proceeding to payment

An order receipt has been emailed to {email}

Order

This feature is currently unavailable at this screen size.

Payment

Shipping

Checkout

KEEP IN MIND

You will lose any existing chat history by starting a new chat.

Start a new chat?

Compare Products

{price} each for {name}

This document is restricted content.

If you believe you should have permission to this document, please request access.

Restricted Access

It only takes 60 seconds to create an account.

Available {documentType} documents for this product ({counter})

Describe Documents You’d Like to Request

Invalid job title

That’s not the reaction we were expecting.

Page not found - Store for chemicals, polymers and ingredients

Internal Server Error - Store for chemicals, polymers and ingredients

Unexpected error occurred. Please contact us.

Client Side Exception - Store for chemicals, polymers and ingredients

Show products with

Filters

Featured Products

Flavor & Taste Explorer

Flavor Families

Enter your inquiry here, include as much detail as you’re able. *

To submit an inquiry to {companyName}, please fill out the form below and click Submit. They will get back to you as soon as they’re able.

Home Page

Request samples, documents, and quotes directly from suppliers

{companyName} experts - Knowde

Knowde is the first marketplace for chemicals, polymers and ingredients. Our leading-edge digital capabilities connect thousands of suppliers and customers every day.

Chemicals Marketplace - ingredients & raw materials - Knowde

Learn how to take full advantage of the free to use tools that you have unlocked.

Explore the capabilities of the platform and get immediate assistance for your needs with one of our experts.

Schedule a Demo

You’ll meet with Kiana from our Knowde Marketplace Team

Explore the capabilities of the platform and get immediate assistance for your needs.

Learn how you can make the most of the free tools now available to you.

Explore the capabilities of the platform with our dedicated team.

Weekly Webinar

See which others might better fit your needs.

This is just one of {allProducts} products on Knowde.

BROWSE THE MARKETPLACE BY

Knowde for Suppliers

Most popular categories

Gain instant access to our marketplace of over 250,000 chemicals, ingredients and polymers from 8,000 suppliers. Browse, search, and filter to quickly compare products, find information, request documents, order samples, and get quotes directly from suppliers.

Search and filter over 250,000 chemicals, ingredients and polymers, access documents and download starter formulations. Interact with over 8,000 suppliers whose representatives are ready to help. Sign up for a free Knowde Marketplace account today.

Create a free account to gain instant access to our marketplace of over 250,000 products and their documents.

Get new products to market faster with a free Knowde Marketplace account

The fastest way to find the right raw materials for your products

Want to explore more products?

Popular {companyName} Products

Start Order

Get a Quote

1 of {brandProductsCount} products in this brand

This will be used for any follow-up questions so we can best meet your needs

Please fill out the form below to help {companyName} prepare your quote

This supplier is not accepting quote requests at this time.

Your request has been sent to {companyName}

This information will help us get you the right materials.

All Categories

{numberOfResults, plural, one {Brand} other {Brands}}

{numberOfResults, plural, one {Product} other {Products}}

Search Tips

{charactersCounter}/{limitCharacters} Characters

Visit

Your account has been verified. You now have access to the full power of {companyName}

The quantity your business will require annually, if the sample product suits your project's needs.