Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Fillers Included
- Polymer Name
- Reinforcement Material
- Technologies
Features & Benefits
- Materials Features
- Characteristics
- High mechanical strength, rigidity, hardness and tenacity
- Good fatigue resistance
- High mechanical damping
- Good sliding ability
- Excellent wear resistance
- Good electrical insulation properties
- High resistance to strong energy radiation (gamma and X rays)
- Good machinability on machine tools
Applications & Uses
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Flame Rating
- Physical Properties
- Mechanical Properties
- Typical Properties
- Thermal Properties
- Electrical Properties
- Flammability
- Tribological Properties
Value | Units | Test Method / Conditions | |
Specific Gravity | 1.29 | g/cm3 | ISO 1183 |
Water (Absorption At Saturation) | 5.5 | % | ISO 62 |
Moisture (Absorption At 23°C - 50% RH) | 1.7 | % | ISO 62 |
Value | Units | Test Method / Conditions | |
Yield Strength | 90 - 45 | MPa | ISO 527 |
Rockwell Hardness | 76 | Scale M | ISO 2039-2 |
Tensile Strength (Break) | 100-75 | MPa | ISO 527 |
Elongation (Break) | 5 - 12 | % | ISO 527 |
Tensile Modulus | 5900-3200 | MPa | ISO 527 |
IMPact Strength (Un-Notched) | min. 50 | KJ /m2 | ISO 179 |
IMPact Strength (Notch) | 6 | KJ /m2 | ISO 179 |
Compressive Stress (1% Strain-23°C) | 28 | MPa | ISO 604 |
Value | Units | Test Method / Conditions | |
Bondability | No. | — | — |
UV Resistance | N/Y | — | — |
Value | Units | Test Method / Conditions | |
Maximum Operating Temperature | 120 | °C | — |
Minimum Operating Temperature | -20 | °C | — |
Heat Deflection Temperature (1.81 MPa) | 150 | °C | ISO 75 |
Thermal Conductivity (23°C) | 0.3 | W/(K*m) | DIN 52612 |
Coef. Of Linear Thermal Expansion (23 To 100°C) | 60 | μm | ASTM D696 |
Value | Units | Test Method / Conditions | |
Volume Resistance | min.10^13 | Ω | IEC 60093 |
Surface Resistance | min.10^12 | Ω | IEC 60094 |
Dielectric Constant (1 MHZ) | 3.9 | abs | IEC 60250 |
Dielectric Loss Factor (1 MHZ) | 0.04 | tan | IEC 60250 |
Dielectric Witch (2mm) | 20 | KV/mm | IEC 60243 |
Value | Units | Test Method / Conditions | |
Flammability | V2 | — | UL 94 |
Value | Units | Test Method / Conditions | |
Static Coef. Of Friction On Polished Steel | 0.23 | abs | MPC test |
Dynamic Coef. Of Friction On Polished Steel | 0.24 | abs | MPC test |
Pv Limit Without Lubrication | 0.33 | MPa | MPC test V = 0.5 m / s MPC |
Wear Coefficient On Hardened Polished Steel | 3.8 | μm/s | test PV = 0.1 MPa * m / s |
Maximum Pressure | 28 | MPa | MPC test |
Regulatory & Compliance
- Certifications & Compliance
- Food Contact Safety (FDA Compliance)
NO (Test Method DM 21.3.73)