Products

Manifattura Cattaneo PTFE normally considered a thermoplastic material, is the best known and most used fluoropolymer. Its chemical-physical characteristics make it essential to use specific techniques for its production.

Manifattura Cattaneo PET + PTFEis a polyethylene terephthalate modified in the structure by the incorporation of dispersed PTFE. This specific formulation exhibits extraordinary self-lubricating properties, in addition to having excellent wear resistance, it offers a better coefficient of friction.

Manifattura Cattaneo PVC HI has a high chemical stability and excellent fire resistance (it is self-extinguishing). Rigid PVC belongs to the category of thermoplastics and has an amorphous structure, has a high solidity and a high modulus of elasticity. It has excellent electrical characteristics, especially in the field of low voltages and frequencies.

Manifattura Cattaneo PEEK is a semi-crystalline thermoplastic is based on polyetheretherketone resin, is a technologically advanced material and exhibits a particular combination of remarkable mechanical properties, temperature resistance and excellent chemical resistance.

Manifattura Cattaneo PE HD material has a high resistance to chemicals, absorbs little water and has good electrical properties. It is normally used with temperatures between –40 ° C and + 80 ° C and is resistant to water, saline solutions, acids, alkalis, alcohol and petrol. Below 60 ° C PE is insoluble in all organic solvents.

Manifattura Cattaneo POM c+PTFE is a Well-distributed combination of acetal resin + PTFE that highlight both the characteristics of POM C and those of PTFE, increasing the smoothness; therefore it has a low coefficient of friction and better resistance to wear and to temperature.

The natural cast polyamide reveals characteristics that are very close to the same ones found in Manifattura Cattaneo PA 6 G. It combines high mechanical resistance, rigidity and hardness with good resistance to wear and creep, as well as a good resistance to thermal aging and good machinability on machine tools.

Manifattura Cattaneo PP H has high electrical and chemical characteristics. It has good rigidity and solidity. It is normally used with temperatures between + 5 ° c and + 90 ° c. It has a high resistance to chemical agents; you can weld it.

Compared to virgin Manifattura Cattaneo PA 6.6 30% GF glass fiber reinforced polyamide exhibits improved mechanical strength, stiffness, dimensional stability and creep resistance, as well as excellent wear resistance retention and the ability to use at higher temperatures .

Manifattura Cattaneo PVDF is a Non-toxic semi-crystalline thermoplastic with high chemical resistance. Suitable for contact with food.

Manifattura Cattaneo PE UMW material has a high resistance to chemicals, absorbs little water and has good electrical properties. It is normally used with temperatures between –40 ° C and + 80 ° C and is resistant to water, saline solutions, acids, alkalis, alcohol and petrol. Below 60 ° C PE is insoluble in all organic solvents.

Manifattura Cattaneo PP-s has high electrical and chemical characteristics. It has good rigidity and solidity. It is normally used with temperatures between + 5 ° c and + 90 ° c. It has a high resistance to chemical agents; you can weld it.

Manifattura Cattaneo PVC-Uhas a high chemical stability and excellent fire resistance (it is self-extinguishing). Rigid PVC belongs to the category of thermoplastics and has an amorphous structure, has a high solidity and a high modulus of elasticity. It has excellent electrical characteristics, especially in the field of low voltages and frequencies.

The semi-finished products in Manifattura Cattaneo POM c are more resistant to hydrolysis, strong alkalis and thermo-oxidant degradation.