Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Polymer Name
- Technologies
- Product Families
Features & Benefits
- Materials Features
- Characteristics
- High mechanical strength, rigidity, hardness and tenacity
- Good fatigue resistance
- High mechanical damping
- Good sliding ability
- Excellent wear resistance
- Good electrical insulation properties
- High resistance to strong energy radiation (gamma and X rays)
- Good machinability on machine tools
Applications & Uses
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Physical Properties
- Mechanical Properties
- Thermal Properties
- Typical Properties
- Electrical Properties
- Flammability
- Tribological Properties
Value | Units | Test Method / Conditions | |
Specific Gravity | 1.14 | g/cm3 | ISO 1183 |
Water (Absorption At Saturation) | 8 | % | ISO 62 |
Moisture (Absorption At 23°C - 50% RH) | 2.4 | % | ISO 62 |
Value | Units | Test Method / Conditions | |
Yield Strength | 80 - 60 | MPa | ISO 527 |
Rockwell Hardness | 88 | Scale M | ISO 2039-2 |
Elongation (Break) | 40 - 100 | % | ISO 527 |
Tensile Modulus | 3100 - 1800 | MPa | ISO 527 |
Impact Strength (Un-Notched) | NB | KJ /m2 | ISO 179 |
Impact Strength (Notch) | 4 - 15 | KJ /m2 | ISO 179 |
Flexural Strength (3.5%) | 140 -160 | MPa | ISO 178 |
Compressive Stress (1% Strain-23°C) | 26 | MPa | ISO 604 |
Value | Units | Test Method / Conditions | |
Maximum Operating Temperature | 105 | °C | — |
Minimum Operating Temperature | -40 | °C | — |
Heat Deflection Temperature (1.81 MPa) | 80 | °C | ISO 75 |
Thermal Conductivity (23°C) | 0.29 | W/(K*m) | DIN 52612 |
Coef. Of Linear Thermal Expansion (23 To 100°C) | 80 | μm | ASTM D696 |
Value | Units | Test Method / Conditions | |
Bondability | No. | — | — |
Oxygen Limit Index | 25 | % | ISO 4589 |
UV Resistance | N/Y | — | — |
Value | Units | Test Method / Conditions | |
Volume Resistance | min.10^12 | Ω | IEC 60093 |
Surface Resistance | min.10^12 | Ω | IEC 60094 |
Dielectric Constant (1 MHZ) | 3.7 | abs | IEC 60250 |
Dielectric Loss Factor (1 MHZ) | 0.05 | tan | IEC 60250 |
Dielectric Witch (2mm) | 17 | KV/mm | IEC 60243 |
Value | Units | Test Method / Conditions | |
Flammability | V3 | — | UL 94 |
Value | Units | Test Method / Conditions | |
Static Coef. Of Friction On Polished Steel | 0.21 | abs | MPC test |
Dynamic Coef. Of Friction On Polished Steel | 0.24 | abs | MPC test |
Wear Coefficient On Hardened Polished Steel | 7.5 | μm/s | test PV = 0.1 MPa * m / s |
Maximum Pressure | 26 | Mpa | MPC test |
Regulatory & Compliance
- Food Contact Safety (FDA Compliance)
Yes (Test Method -DM 21.3.73)