Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Polymer Name
- Technologies
- Product Families
Features & Benefits
- Materials Features
- Characteristics
- Excellent dimensional stability
- Hardly flammable and self-extinguishing
- Very low flue gas density
- High resistance to high doses of energy radiation
- excellent sliding ability
- excellent resistance to abrasion and wear
- Excellent relationship between stiffness, strength and resilience
- Poor tendency to slide
- Good workability, thermo-formability, adhesive properties and weldability
- High dimensional stability in hot conditions
- High continuous operating temperature
- Low coefficient of linear expansion
- Good electrical insulation characteristic at different temperatures.
Applications & Uses
- Markets
- Applications
- Plastics & Elastomers End Uses
Properties
- Physical Form
- Physical Properties
- Mechanical Properties
- Typical Properties
- Thermal Properties
- Electrical Properties
- Flammability
- Tribological Properties
Value | Units | Test Method / Conditions | |
Specific Gravity | 1.26-1.32 | g/cm3 | ISO 1183 |
Moisture (Absorption At 23°C - 50% RH) | 0.5 | % | ISO 62 |
Value | Units | Test Method / Conditions | |
Yield Strength | 88 | MPa | ISO 527 |
Rockwell Hardness | 99 | Scale M | ISO 2039-2 |
Elongation (Yield) | 5 | % | ISO 527 |
Tensile Strength (Break) | 97 | MPa | ISO 527 |
Elongation (Break) | 20-60 | % | ISO 527 |
Tensile Modulus | 3500 | MPa | ISO 527 |
IMPact Strength (Un-Notched) | NB | KJ /m2 | ISO 179 |
IMPact Strength (Notch) | 6.1 | KJ /m2 | ISO 179 |
Flexural Strength (Ultimate) | 170 | MPa | ISO 178 |
Compressive Strength | 122 | MPa | ISO 178 |
Poisson'S Ratio | 0.4 | — | Abs |
Value | Units | Test Method / Conditions | |
Bondability | Yes | — | — |
Oxygen Limit Index | 24-35 | % | ISO 4589 |
UV Resistance | Yes | — | — |
Value | Units | Test Method / Conditions | |
Temperature Limit Of Use | -310 | °C | — |
Heat Deflection Temperature (1.81 MPa) | 160 | °C | ISO 306 |
Thermal Conductivity (23°C) | 0.25 | °C | ISO 75 |
Coef. Of Linear Thermal Expansion (23 To 100°C) | 47 | °C | ISO 75 |
Value | Units | Test Method / Conditions | |
Volume Resistance | min.10^14 | Ω | IEC 60093 |
Surface Resistance | min.10^13 | Ω | IEC 60094 |
Dielectric Constant (1 MHZ) | 3.2 | abs | IEC 60250 |
Dielectric Loss Factor (1 MHZ) | 0.003 | tan | IEC 60250 |
Dielectric Witch (2mm) | 24 | KV/mm | IEC 60243 |
Value | Units | Test Method / Conditions | |
Flammability | V0 | — | UL 94 |
Value | Units | Test Method / Conditions | |
Static Coef. Of Friction On Polished Steel | 0.22 | abs | MPC test |
Dynamic Coef. Of Friction On Polished Steel | 0.25 | abs | MPC test |
Pv Limit Without Lubrication | 1.9 | MPa | MPC test V = 0.5 m / s MPC |
Wear Coefficient On Hardened Polished Steel | 3.9 | μm/s | test PV = 0.1 MPa * m / s |
Maximum Pressure | 30 | MPa | MPC test |
Regulatory & Compliance
- Food Contact Safety (FDA Compliance)
Yes (Test Method -DM 21.3.73)