Jet-Oxide® 15%

Identification & Functionality

Cleaning Ingredients Functions

Disinfectant

Technologies

Cleaning Ingredients

Product Families

Cleaning Ingredients — Functional Additives

Microbial Control & Preservatives

Features & Benefits

HII Features

Easy-to-handle

Applications & Uses

Markets

HI&I Care

Applications

HI&I Care — Institutional & Industrial Care

Industrial Cleaning,

Institutional & Catering,

Other Institutional & Industrial Care

I&I Cleaning Applications

Industrial Cleaners,

Industrial Surface Care,

Sanitizers

Use on industrial hard surfaces for human CORONAVIRUS

The EPA approved using Jet-Oxide 15% on industrial hard surfaces for Human Coronavirus and recommends using Jet-Oxide 15% at 1300 ppm (or 0.13% concentration) of active ingredient – which is about one fluid ounce of Jet Oxide 15% mixed in one gallon of water, with at least one minute of exposure. Marrone Bio Innovations also recommends the use of a foamer.

EPA approval and recommendation can be found at the following link: www.epa.gov/pesticide-registration/list-n-disinfectants-use-against-sars-cov-2. Jet-Oxide 15% (EPA # 54289-4-81803) is a supplemental registration of PERACLEAN® 15 (EPA #54289-4).

ORGANIC:
Jet-Oxide® 15% has WSDA certification and has been verified to comply with the USDA National Organic Standards.

As the product biodegrades, all compounds used in Jet-Oxide 15% are environmentally friendly.

Uses

Institutional/Industrial Sanitizing of Previously Cleaned Non-Porous Food Contact Surfaces in:
Dairies, Wineries, Breweries, Food and Beverage Plants, Disinfecting Poultry Premises, Poultry Hatcheries, Animal Housing Facilities, Reverse Osmosis Membranes and Ultra Filtration

Hard Surface Disinfection in:
Hospitals, Health Care Facilities, Schools, Colleges, Veterinary Clinics, Animal Life Science Laboratories, Industrial Facilities, Office Buildings, Recreational Facilities, Retail and Wholesale Establishments

Bacteria, Fungi, and Slime Control in:
Pulp and Paper Mill Systems, Dispersed Pigments, Cooling Water Systems, Coatings Preservation

Applications

• Fresh sanitizing solutions should be prepared at least daily. Prepared solution may not be used for subsequent sanitizing.
• Recommended use on pre-cleaned surfaces.
• Effective as a sanitizer when solution is prepared in water of up to 400 ppm hardness as a CACO3. This product has demonstrated greater than a 99.999% reduction of survivors after a 30-second exposure period in the AOAC Germicidal and Detergent Sanitizing Action of Disinfectants study.

Properties

Physical Form

Liquid

Regulatory & Compliance

Certifications & Compliance

EPA Registered