Products

Mavcoat® MD-4 is a water-based, semi-permanent release coating for all organic rubber elastomers. It contains a novel binder system that adheres strongly to the mold surface and a unique lubricity additive that allows for good rubber flow throughout the mold. Mavcoat® MD-4 is a non-silicone ceramic-based technology and can be used to make food grade products because it meets 21 CFR 181.28.

Mavcoat® AD seals the porosity of composite tools made from polyester, vinyl-ester, epoxy, and all other resin surfaces and accepts the mold release coating. AD helps to improve the surface quality of finished parts even for class A finished molds.

Mavcoat® 527ML contains unique additives for high slip and is used for difficult-to-release parts in the most demanding applications. Mavcoat® 527ML is fast evaporating, solvent-based, and semi-permanent capable of releasing all thermoset composites.

Mavcoat® SR is a specialized semi-permanent release agent for the release of silicone, fluorosilicone, and organic rubber elastomers. Its unique chemistry cleans mold and maintains a lustrous surface.

Mavcoat® FR-2 will make it easier to remove any build-up on your flanges. Only a thin film of the Mavcoat® FR-2 is needed to prevent material from sticking in the flanges. Keeping the flanges clean and free of build-up will eliminate air bubbles from forming along the parting line.

Mavcoat® RT-44 anti-static coating can be added to your dry powder or applied directly to the mold surface. This will improve granite appearance and eliminate color swirling that can occur with some dry blended materials.

Mavcoat® RT-3 is a highly semi-permanent release able to withstand temperatures up to 1,300°F. This allows it to last much longer between reapplications and will allow you to lower the amount of mold release you use. Mavcoat® RT-3 is able to release all densities of linear and crosslink polyethylene resins.

Mavcoat® FGR-4 is a quick-cure, fast evaporating, semi-permanent mold release coating for the release of reinforced polyester and vinyl-ester resins. FGR-4 is a stronger, polymer-based release that works better for non-gel coated parts and can be wiped or sprayed onto the mold surface.

Mavcoat® MMR is the ready-to-use version of Mavcoat® GSMR so it does not require dilution. Mavcoat® MMR is a water-based coating used in high-volume production environments. Since it contains high-slip lubricity polymers, MMR yields superior release for parts built on mandrels or in compression and vacuum bagging operations. It is semi-permanent and will yield multiple parts with a single application or can be applied before every cycle in difficult demolding situations. It produces a glossy surface finish and releases all thermosets.

Mavcoat® RH is a specialized product used to make rubber hose from rubber mandrels. It seals and releases the rubber mandrel upon which, rubber hose is extruded, wrapped, and cured in very long lengths of 1,000 to 2,000 feet. Mavcoat® RH cures on the mandrel and provides extreme lubricity so the entire length of hose is extracted in one piece. The diameter of the rubber mandrel can be any size, but typically ranges from 1/8” to 4”. The finished hose is used in many applications such as, hydraulic, industrial, and oil field.

Mavcoat® GSMR is a concentrated, water-based coating used for mandrel-built parts that ease extraction of parts from mandrel because high-slip lubricity polymers reduce friction at the mold surface. Mavcoat® GSMR is concentrated so it can be shipped overseas and diluted with water at the manufacturing site. It yields superior release of all thermoset composite systems.

Mavcoat® STM is used to prevent uncured rubber from sticking to itself when rubber is stacked or coiled. Mavcoat® STM replaces messy talc and stearate-based dispersion. It is non-silicone, water-based, and clear. It does not contaminate the rubber or cause defects during molding operations.

Mavcoat® TZ-4 technology is a water-based coating that releases all organic rubber. It is semi-permanent and may only need to be applied once per shift in some applications. Since Mavcoat® TZ-4 releases all organic rubber compounds, it will be the only release needed on the production floor.

Mavcoat® Roto is a semi-permanent release that has the unique ability to release all densities of linear and crosslink polyethylene resins. We guarantee no pock-marking (coining) on crosslink parts when using Roto. And most importantly, Mavcoat® Roto maintains product dimensions without warping the part no matter how much is applied.

Mavcoat® KCP contains unique additives for high slip and is used for difficult-to-release parts in the most demanding applications. Mavcoat® KCP is fast evaporating, solvent-based, and semi-permanent capable of releasing all thermoset composites. It is a quick-cure, fast evaporating, semi-permanent mold release coating for the release of reinforced polyester and vinyl-ester resins. Upon evaporation and cure, parts demold with a high gloss finish.

Mavcoat® MBH is a specialized technology for making Mandrel-Built Hose on straight mandrels. It can be used as-is or diluted with water. Mavcoat® MBH will release all organic rubber elastomers. The technology seals, releases and lubricates the mandrel, which is then tightly wrapped with rubber and cured. The coating produces a very low coefficient of friction, so extraction is easy, and the finished hose slides from the mandrel with little effort.

Mavcoat® TM-10 is a water-based semi-permanent release that is an alternative for Teflon coating your molds. The Mavcoat® TM-10 will produce a semi-gloss finish on your parts without any white haze. This will eliminate the need to flame treat most parts. The TM-10 will release all densities of linear and crosslink polyethylene resins as well as polycarbonate.

Mavcoat® EP-111 is considered the workhorse in the industry. It is a semi-permanent, water-based, non-silicone coating that yields a matte finish with excellent cosmetics. The surface is free of porosity and pinholes. There is little to no transfer making for superior adhesion of paint, print, or decals. It is good for high volume production where release is applied to hot molds and yields multiple releases with a single application.

Mavcoat® EM is a ready-to-use, water-based system for high-volume production where application to hot molds is made frequently because a semi-permanent coating is not wanted or needed. Mavcoat® EM produces a glossy surface finish on all thermoset composite systems.

Mavcoat® CFR-5 is the water-based version of Mavcoat® DHSR. It is a water-based coating that will prevent any rigid polyurethane foam from sticking to your parts' surface. During the foam filling process excess rigid foam will expand out vent holes attaching itself to the exterior of the part. Apply Mavcoat® CFR-5 anywhere rigid foam may come into contact to prevent the foam from sticking. Cured rigid foam can be easily removed without damaging or staining your part. The Mavcoat® CFR-5 will not discolor your parts' surface and it can be easily removed with soap and water.

Mavcoat® MD-W6 utilizes a water-based ceramic technology that releases all organic and silicone rubber. It is a thin film non-silicone, semi-permanent system which will minimize build up. Mavcoat® MD-W6 will consolidate all mold releases into one system.

Mavcoat® Roto-4 is similar to Mavcoat® Roto, but contains lubricity additives for hard to remove parts due to undercuts, scuppers, bolts, pins, or draft.

Mavcoat® CDN is a non-silicone, water-based emulsion that is used in applications where silicone contamination is not allowed such as in aerospace parts and medical devices. Mavcoat® CDN releases foams and elastomers and works best on heated metal molds where water can rapidly evaporate.

Mavcoat® 1000 coats and impregnates the nylon tape that is used to wrap mandrel-built rubber hoses. It prevents the tape from sticking to the rubber hose, making the re-usable nylon tape easy to remove. Tape life is prolonged, saving the operation money. Mavcoat® 1000 is a concentrated polymer solution that is diluted with water. It is also non-silicone so there is no contamination of the finished hose.

Mavcoat® SRLP-2 is a specialized technology for making mandrel-built silicone rubber parts. It is commonly used for making aircraft door seals and other silicone rubber laid up on internal mandrels. The coating releases compression parts and lubricates the mandrel for easy extraction. Tightly wrapped long sections of cured silicone rubber slide from the mandrel with little effort.