Products

Mavcoat® CRW releases hardened concrete from all forms and formliners that yields clean, easy stripping without bugholes and stains. CRW is a concentrated product used in applications that require a stronger release agent in hard to demold situations. CRW meets California, OTC, and all other Federal VOC regulations. Mavcoat CRW will not separate, so there is no need to mix before use.

Mavcoat® MD-4 is a water-based, semi-permanent release coating for all organic rubber elastomers. It contains a novel binder system that adheres strongly to the mold surface and a unique lubricity additive that allows for good rubber flow throughout the mold. Mavcoat® MD-4 is a non-silicone ceramic-based technology and can be used to make food grade products because it meets 21 CFR 181.28.

Mavcoat® AD seals the porosity of composite tools made from polyester, vinyl-ester, epoxy, and all other resin surfaces and accepts the mold release coating. AD helps to improve the surface quality of finished parts even for class A finished molds.

Mavcoat® SR is a specialized semi-permanent release agent for the release of silicone, fluorosilicone, and organic rubber elastomers. Its unique chemistry cleans mold and maintains a lustrous surface.

Mavcoat® FR-2 will make it easier to remove any build-up on your flanges. Only a thin film of the Mavcoat® FR-2 is needed to prevent material from sticking in the flanges. Keeping the flanges clean and free of build-up will eliminate air bubbles from forming along the parting line.

Mavcoat® RT-44 anti-static coating can be added to your dry powder or applied directly to the mold surface. This will improve granite appearance and eliminate color swirling that can occur with some dry blended materials.

Mavcoat® NB is the “workhorse” and one of the best-selling odorless solvent-based products. It is designed for hand casting or high-volume automated production lines. It can be wiped on or spray applied with an airbrush. It is good for releasing all Shore A and some Shore D polyurethanes.

Mavcoat® RT-3 is a highly semi-permanent release able to withstand temperatures up to 1,300°F. This allows it to last much longer between reapplications and will allow you to lower the amount of mold release you use. Mavcoat® RT-3 is able to release all densities of linear and crosslink polyethylene resins.

Mavcoat® FGR-4 is a quick-cure, fast evaporating, semi-permanent mold release coating for the release of reinforced polyester and vinyl-ester resins. FGR-4 is a stronger, polymer-based release that works better for non-gel coated parts and can be wiped or sprayed onto the mold surface.

Mavcoat® XC-ES does not contain any solvents and provides the greatest release strength for all flexible polyurethane foam systems. Mavcoat® XC-ES will yield several parts from a single application.

Mavcoat® RH is a specialized product used to make rubber hose from rubber mandrels. It seals and releases the rubber mandrel upon which, rubber hose is extruded, wrapped, and cured in very long lengths of 1,000 to 2,000 feet. Mavcoat® RH cures on the mandrel and provides extreme lubricity so the entire length of hose is extracted in one piece. The diameter of the rubber mandrel can be any size, but typically ranges from 1/8” to 4”. The finished hose is used in many applications such as, hydraulic, industrial, and oil field.

Mavcoat® EF-ND is the water-based version of Mavcoat® HVP-I. HVP-I is engineered for high-volume production environments that don’t need a strong release but still require a fast evaporating mold release with excellent surface wetting properties.

Mavcoat® HVP-E is odorless, solvent-based chemistry that releases all self-skinning urethane foam systems from molds made of steel, aluminum, epoxy, fiberglass, or urethane. The developed skin is uniform, demolds easily and with excellent cosmetics.

Mavcoat® STM is used to prevent uncured rubber from sticking to itself when rubber is stacked or coiled. Mavcoat® STM replaces messy talc and stearate-based dispersion. It is non-silicone, water-based, and clear. It does not contaminate the rubber or cause defects during molding operations.

Mavcoat® CRW-2 is a water-based, V.O.C. free emulsion formulated for the release of concrete, GFRC, GRC, and composite reinforced concrete from molds made of steel, polyurethane, RTV silicone, rubber, epoxy, and fiberglass. Mavcoat® CRW-2 will not separate, so no mixing before use is needed.

Mavcoat® DHSR is solvent-based chemistry that is nearly odorless and releases all rigid, closed-cell, polyurethane foam systems. Mavcoat® DHSR adheres to any mold surface such as steel, aluminum, epoxy, fiberglass, or urethane.

Mavcoat® TZ-4 technology is a water-based coating that releases all organic rubber. It is semi-permanent and may only need to be applied once per shift in some applications. Since Mavcoat® TZ-4 releases all organic rubber compounds, it will be the only release needed on the production floor.

Mavcoat® Roto is a semi-permanent release that has the unique ability to release all densities of linear and crosslink polyethylene resins. We guarantee no pock-marking (coining) on crosslink parts when using Roto. And most importantly, Mavcoat® Roto maintains product dimensions without warping the part no matter how much is applied.

Mavcoat® KCP contains unique additives for high slip and is used for difficult-to-release parts in the most demanding applications. Mavcoat® KCP is fast evaporating, solvent-based, and semi-permanent capable of releasing all thermoset composites. It is a quick-cure, fast evaporating, semi-permanent mold release coating for the release of reinforced polyester and vinyl-ester resins. Upon evaporation and cure, parts demold with a high gloss finish.

Mavcoat® MBH is a specialized technology for making Mandrel-Built Hose on straight mandrels. It can be used as-is or diluted with water. Mavcoat® MBH will release all organic rubber elastomers. The technology seals, releases and lubricates the mandrel, which is then tightly wrapped with rubber and cured. The coating produces a very low coefficient of friction, so extraction is easy, and the finished hose slides from the mandrel with little effort.

Mavcoat® PU-54 is a non-silicone water-based release coating specially formulated for release of rigid and flexible polyurethane foams and cast elastomers.

Mavcoat® TM-10 is a water-based semi-permanent release that is an alternative for Teflon coating your molds. The Mavcoat® TM-10 will produce a semi-gloss finish on your parts without any white haze. This will eliminate the need to flame treat most parts. The TM-10 will release all densities of linear and crosslink polyethylene resins as well as polycarbonate.

Mavcoat® BR is a water-based emulsion used to release rubber mats and all other parts made from recycled crumb rubber using urethane binder systems. Emulsion concentrate is usually diluted with water at varying levels to achieve the release needed for a given binder system. It prevents binder from building up on mold surface and keeps tooling clean to yield longer production runs between cleaning cycles.

Mavcoat® T-100 is solvent-based and uses non-silicone polymers that allow finished parts to be painted, printed, plated, or post decorated in any way. Mavcoat® T-100 provides the release of cast elastomers from all types of tooling that allows finished parts to be painted or post-decorated. Mavcoat® T-100 provides the release of integral skin foams from all tooling such as metalized epoxy, aluminum, or fiberglass.

Mavcoat® HR-W32 is a water-based chemistry that releases all flexible polyurethane foam systems from molds made of steel, aluminum, epoxy, fiberglass, or urethane. HR-W32 is ideal for high resiliency seating foam or visco-elastic foam used in pillow or bedding applications.

Mavcoat® 902M is the water-based version of Mavcoat® T-100. T-100 is solvent-based that uses non-silicone polymers to allow finished parts to be painted, printed, plated, or post decorated in any way.

Mavcoat® HR-W27 is water-based chemistry that releases all flexible polyurethane foam systems from molds made of steel, aluminum, epoxy, fiberglass, or urethane. HR-W27 is ideal for high resiliency seating foam or visco-elastic foam used in pillow or bedding applications.

Mavcoat® TPC-1 is a versatile coating designed to release all injection molded thermoplastic resins. It produces a very low coefficient of static friction so parts release easily. It resists film buildup, eliminates knit lines, and yields multiple releases with a single application. TPC-1 is food grade and meets FDA regulation 21 CFR181.28 as a release agent.

Mavcoat® CFR-5 is the water-based version of Mavcoat® DHSR. It is a water-based coating that will prevent any rigid polyurethane foam from sticking to your parts' surface. During the foam filling process excess rigid foam will expand out vent holes attaching itself to the exterior of the part. Apply Mavcoat® CFR-5 anywhere rigid foam may come into contact to prevent the foam from sticking. Cured rigid foam can be easily removed without damaging or staining your part. The Mavcoat® CFR-5 will not discolor your parts' surface and it can be easily removed with soap and water.

Mavcoat® MD-W6 utilizes a water-based ceramic technology that releases all organic and silicone rubber. It is a thin film non-silicone, semi-permanent system which will minimize build up. Mavcoat® MD-W6 will consolidate all mold releases into one system.

Mavcoat® Roto-4 is similar to Mavcoat® Roto, but contains lubricity additives for hard to remove parts due to undercuts, scuppers, bolts, pins, or draft.

Mavcoat® HVP-I is engineered for high volume production environments that don’t need a strong release but still require a fast evaporating mold release with excellent surface wetting properties. It works well on polyurethanes that have Shore A hardness.

Mavcoat® GHS is the strongest release coating in the Mavcoat® product line designed for processes that require a release coating to withstand the most aggressive elastomer chemistry. It does not contain solvents, is non-flammable, odorless, and produces multiple releases. Mavcoat® GHS is equivalent to and replaces Wacker Release Agent E155.

Mavcoat® S-81 is a concentrated mold sealer engineered to fill in mold porosity and act as an extra layer of protection. It does not contain any silicone. Mavcoat® S-81 should be used to seal all types of molds such as epoxy, aluminum, and steel used to make high-resiliency and viscoelastic foam parts. Mavcoat® S-81 is then followed by a mold release coating such as, Mavcoat® HR-W27 or HR-W32. Mavcoat® S-81 can also be used to make master silicone molds.

Mavcoat® CDN is a non-silicone, water-based emulsion that is used in applications where silicone contamination is not allowed such as in aerospace parts and medical devices. Mavcoat® CDN releases foams and elastomers and works best on heated metal molds where water can rapidly evaporate.

Mavcoat® 1000 coats and impregnates the nylon tape that is used to wrap mandrel-built rubber hoses. It prevents the tape from sticking to the rubber hose, making the re-usable nylon tape easy to remove. Tape life is prolonged, saving the operation money. Mavcoat® 1000 is a concentrated polymer solution that is diluted with water. It is also non-silicone so there is no contamination of the finished hose.