Knowde Enhanced TDS
Identification & Functionality
- Technologies
Features & Benefits
- Materials Features
- Advantages
- Offers an easy peel release. The smooth release properties are similar to PVODC release coatings.
- Cost Efficient. Excellent release can be obtained using as little as 2.0% solids concentration, depending on film, adhesive, coating equipment and desired release levels. The 51-52% solids allow less water to be shipped.
- Low temperature curing.
- A glossy coating
- Can be used with aggressive solvent, hot melt or aqueous acrylic adhesives.
Applications & Uses
- Applications
- Use Level
- 2.0 - 5.0%
- Applications
Escoat RA-130W Release Coat is diluted in water to achieve application concentrations. Depending on the substrate and adhesive, the solids concentration should be determined by lab test. Recommended levels are between 2.0 - 5.0%. Film substrates should be corona treated to ensure adhesion to the substrate. Coat at 4 - 5 gm/m2 (wet coat weight) using conventional coating methods with Meyer rod, Anilox or Gravure rollers. Coated substrate must be thoroughly dry before rewinding.
Properties
- Physical Form
- Appearance
- Liquid
- Soluble in
- Aqueous
Regulatory & Compliance
- FDA Regulations
Escoat RA-130W Modified Release Coat does not have any approval for indirect food contact.
Safety & Health
- Toxicity & Safety
This material is not intended for use in products for which prolonged contact with mucous membranes or abraded skin, or implantation within the human body is specially intended, unless the finished product has been tested in accordance with the Food and Drug Administration and/or other applicable safety testing requirements. Because of wide range of such potential uses, Mayzo, Inc. is not able to recommend this material as safe and effective for such uses and assumes no liability for any such uses
Packaging & Availability
- Country Availability
- Regional Availability
Storage & Handling
- Storage
Keep away from fire and sunlight. Protect eyes and skin from direct contact and avoid inhaling. Do not store below 5C or over 40C. Keep container tightly closed. DO NOT ALLOW THIS PRODUCT TO FREEZE. It will no longer be usable.