Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Features
- Economic
- 1 to 1 Mix Ratio
- Fills small cracks
- Low temperatures brittle point
- Easy to install
Applications & Uses
- Markets
- Compatible Substrates & Surfaces
- Areas of Application
- Concrete floors
- Secondary containment areas
- Warehouses
- Industrial facilities
- Paper Mills
- Food Processing Plants
- Mechanical Rooms
- Surface Preparation
Cracks and voids must be clean and free of loose material, dust, grease, oil, grout, or other contaminants. Chip or rout out cracks that are hard to clean. Notch or V cracks for maximum performance. Seal the bottoms of cracks through the slab, or where the sealer will leak through, with a polyurethane rope. Concrete should be clean, dry and rough for best performance.
- Application Instructions
- Mix MICOROX® 25-86 Primer Sealer by combining one part of hardener component with one part of resin component. A measuring cup, or a can may be used to measure the components.
- Mix the two components together thoroughly for two to three minutes to a uniform color and consistency. Use a paddle or low speed drill - stirrer to mix the material.
- When used as a primer, 25-86 is poured out on the floor in lines and joined with a notched squeege. The material is then backed rolled to achieve a uniform 16-20 mil coating. It is ready for top coating in 5-8 hours depending upon the temperature of the floor.
- When used as a base for a flexible Decorative Floor, the material is applied as above and then broadcast with Decorative Flooring Sand. The sand may also be added to the mixed liquids and applied as a slurry then broadcast dry.
- Decorative Flooring prepared with 26-86 should be sealed with Micorox 1882 clear sealer to improve chemical resistance and wear.
Coverage Per Gallon : 80-100 square feet per gallon Coverage will vary depending upon use.
Working Life : Working life of mixed materials is very short. Mix only the amount of material that can be used in 30 minutes.
- Clean-Up
Clean tools immediately with hot soapy water or with solvents such as Xylene or MEK. These products are HAZARDOUS and must be used with CAUTION and MUST be used with appropriate ventilation.
Properties
- Physical Properties
| Value | Units | Test Method / Conditions | |
| Viscosity (Mixed) | 500 - 800 | cps | — |
| Yield | 231.0 | cubic inches per mixed gallon | — |
| Working Life-Mixed Materials | 25 - 30 | minutes | — |
| Set Time (70°) | 5 to 8 | hours | — |
| Tensile Strength | 500.0 | psi | — |
| Tensile Elongation | 110.0 | % | — |
| Compressive Strength | 7600.0 | psi | — |
| Tensile Bond Strength | 350.0 | psi | — |
Safety & Health
- Precautions
MICOROX® 25-86 Primer/Sealer is intended for industrial and commercial use only ! Prolonged contact with skin can cause irritation. Wear protective clothing and chemical splash goggles to avoid eye contact. Never recap a container of mixed componentsas the continuing reaction may cause an EXPLOSION.
Packaging & Availability
- Packaging
- 2 Gallon Units
- 20 Gallon Units
- Availability
Available in Clear and 14 basic colors. Custom colors upon request.
Storage & Handling
- Storage and Shelf Life
Stored at room temperature, the unopened materials should have a shelf life of one year