Products

MICOROX® 145 SEALER is a 100% solids epoxy novalac coating designed for application in extremely corrosive environments. 145 may be used as either a topcoat for trowel or slurry floors or as a stand-alone coating. When used as a topcoat, 145 SEALER improves the chemical and abrasion resistance of MICOROX® FLOORING SYSTEMS while improving cleanability. As a coating for old or new concrete it offers outstanding protection from a wide variety of industrial chemicals including concentrated Sulfuric Acid.

MICOROX® FLOORLIFE™ PRIMER is a 77% non-volatile primer designed to improve the adhesion of trowelled, slurry or roller applied coatings to concrete and other substrata. MICOROX® FLOORLIFE™ PRIMER is designed for use under all FLOORLIFE™ 3-part trowel or slurry applied systems. It features low viscosity for deep penetration, long working life, and outstanding adhesion.

MICOROX® PVE PRIMER is a single component urethane primer designed to insure the maximum adhesion of polyester and vinylester systems to concrete, steel and other surfaces. Although designed primarily as a primer MICOROX® PVE PRIMER offers superior abrasion and chemical resistance compared to other moisture cured urethanes when used as a concrete sealer.

MICOROX® 287 PRIMER is a multipurpose, 40% solids primer that allows the application of other MIcORON products, including resurfacers, liners, and coatings to old or green concrete. MICOROX® 287 PRIMER is applied to eliminate the conventional 28 day cure time by bonding to the fresh concrete surface and providing a chemical bond to the top coat. 287 PRIMER is moisture tolerant, has no odor and zero voc. It will typically reduce moisture transmission by better than 50% with one application.

MICOROX® 103 PRIMER is a multipurpose primer and sealer, based upon a unique chemistry that allows the application of other MICOROX products, including resurfaces, liners, and coatings to green concrete. MICOROX® 103 PRIMER is applied to eliminate the conventional 28-day cure time by deeply penetrating into the pores of the fresh concrete surface, and bonding securely to the concrete and the overlayment as well. This primer/sealer provides substantial savings in both cost and downtime. MICOROX® 103 PRIMER is an ideal substitute for curing compounds, hardeners, or sealants for new concrete because it prevents the rapid dehydration of new concrete and eliminates concrete dusting, resulting in a better cure and higher concrete strengths.

MICOROX® 25-86 PRIMER/SEALER is a two component, 100% solids epoxy resin based product designed as a flexible primer or binder for Decorative Flooring. It is intended for use in areas where thermal or mechanical shock and minor substrate movement is expected. 25-86 will penetrate and seal small cracks and function as a membrane under other flooring systems.

MICOROX® 1295 Sealer is a 100% solids, 2 component epoxy sealer designed as a coating for concrete floors and a sealer for other MICOROX® FLOORING SYSTEMS. It is ideal for commercial, institutional, and light manufacturing areas where a high-quality coating or sealer is required. 1295 Sealer offers a durable abrasion resistant surface. It provides excellent resistance to many common industrial chemicals, grease, oil, and cleaning compounds. Excellent handling characteristics provide easy installation using brush, roller, and other common application techniques. 1295 can also be used as a base for colored vinyl flake floors.