Products

Microlink XL is a crosslinkable polyethylene is a material that is produced from standard polyethylene by a chemical process which allows the molder to produce, on conventional rotational molding equipment, finished products with much improved performance properties.

Microlin HL29 is a tough ‘new generation’ Hexene Linear High Density rotational molding powder designed to produce moldings of extremely high rigidity combined with high impact strength, particularly at low temperatures.The polymer and powder flow properties of HL29 have been designed to give good mouldability over a wide processing window, particularly for more demanding rotational molding applications such as Kayaks, Canoes and Marine Leisure Craft.

Micropol L7 is a rotational molding powder based on a conventional polyethylene formulation designed to produce moldings with a high gloss finish and outstanding toughness. This material has been established for many years as an outstanding low density polyethylene powder for Rotational Molding.

Microlin ML73 is a new generation easy flow hexane linear rotational molding powder base designed to produce moldings of good rigidity combined with high impact strength at low temperatures. Also featured is excellent environmental stress crack resistance.

Micropol L20 is a rotational molding powder based on a conventional polyethylene formulation designed to produce moldings with a high gloss finish and outstanding toughness. This material has been established for many years as an outstanding low density polyethylene powder for Rotational Molding.

Microstat ML54/FR powder is designed to reduce the hazards and problems that the generation of static electricity can cause during the handling of conventional polyethylene containers. Typical static problems are dust and particle attraction, fire and explosion risks, personnel shocks and damage to sensitive electronic components stored within the container. This grade also contains a Flame Retardant additive.

Microlin XL28/XUV/FR is a chemically crosslinkable, Flame Retardant Polyethylene, which allows production on conventional rotational molding equipment, of finished products with much improved performance properties. Properties enhanced include toughness (particularly low-temperature impact performance), environmental stress crack resistance, and chemical and temperature resistance.

Micropol Microcoat D is based on a specially selected Low Density Polyethylene. This grade has been developed to give maximum processing efficiency and covering power when used for fluidisedbed dip-coating. Microcoat D is available in all standard colors.

Isoplas P602 is a grade has been specifically designed and developed for the production of injection molded pipe fittings. However, its good mouldability qualities make it suitable for a range of molding applications A guide to its use is available from Micropol together with advice on shrinkage, crosslinking methods, etc. (Information Guide 3).

Microcene MC182 is a new ‘Tank Grade’ polymer from Micropol based on Metallocene technology. A second generation, metallocene medium density polyethylene, with Hexene as co-monomer, suitable for rotational molded items requiring superior mechanical properties. Outstanding process and product benefits result from using polymers of narrow molecular weight distribution and low viscosity at zero shear rates.

Micropol Microcoat H6 is a micro-ground High Density Polyethylene powder. This grade gives maximum processing efficiency and covering power when used for fluidised bed dip-coating, and has been developed for more demanding applications where improved hardness, chemical and heat resistance are required. Microcoat H6 is available ex-stock in Natural, Black and White. All our materials can be color matched to your specification.

Microlin XL31 is a chemically crosslinkable polyethylene which produces a finished molding of improved properties with the use of conventional rotational molding equipment. Properties enhanced include toughness (particularly low-temperature impact performance), environmental stress crack resistance, chemical and temperature resistance. This grade also possesses excellent adhesion properties for use as an internal lining of metallic vessels.

Isoplas P381 – this flexible grade has been developed for use in under-floor heating pipes.

Microlin XL28 is a chemically crosslinkable polyethylene which produces a finished molding of improved properties with the use of conventional rotational molding equipment. Properties enhanced include toughness (particularly low-temperature impact performance), environmental stress crack resistance, chemical and temperature resistance. Typical uses of this material include fuel tanks, urea tanks and stretchers where the rigidity of longer moldings is critical.

Microlin ML54 is a rotational molding powder based on a specially developed easy flow linear polyethylene formulation designed to produce moldings of good rigidity combined with excellent impact resistance & environmental stress crack resistance.

Microcene MC181 is a second generation, metallocene medium density polyethylene, with Hexene as co-monomer, suitable for rotational molded items requiring superior mechanical properties. Outstanding process and product benefits result from using polymers of narrow molecular weight distribution and low viscosity at zero shear rates.

Isoplas P471 has been developed for use in alupex pipes.

Isoplas P501 is used for hot and cold sanitary water pipes.

Isoplas P651 is used for rigid pipes for water transport, and for general purpose use.

Micropol E2020 is a rotational molding powder, based on a random ethylene-vinyl acetate co-polymer of high clarity. This grade has been designed for rotational molding applications, where a high degree of flexibility is required combined with the physical properties and processing behavior of a tough thermoplastic polymer. This material can also be used to produce foams and cable compounds.

Micropol E28-05 is a random ethylene-vinyl acetate copolymer. This grade has been designed for cast / blown film applications where a high degree of flexibility is required combined with the physical cohesive strength properties which render it also suitable for hot-melt adhesive applications. Available in granular or powder form.

Micropol E28-40 is a random ethylene-vinyl acetate copolymer. This grade has been designed for molding applications where a high degree of flexibility is required combined with the physical properties and processing behavior of a tough thermoplastic polymer. This material can also be used to produce foams and cable compounds.