Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- CAS No.
- 9002-84-0
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Benefits
- High lubricity, Dryfilm coating
- Non-stick; low coefficient of friction
- Clean, Non-oily, Non-migrating
- Allows easy removal of outer jacket on wire
Applications & Uses
- Applications
- Application Method
- Uses
ShieldSys 520 is formulated to provide unmatched utility in wire jacket removal due to its high lubricity and nonstick properties.
- Recommended Application Procedure
- Dipping and Flooding – The easiest and most
widely used method. A wiper system should be
used to strip off excess amounts, ensuring a thin,
even coating over the entire length of wire. - Spraying – Particularly effective in depositing a
very thin coating with excellent adhesion. This
system can be used with an automated or hand
spray gun. - Wiping or Brushing – Very effective for coating
small amounts of selected areas on a wire or
cable.
- Dipping and Flooding – The easiest and most
- Recommended Application Procedure
- Dipping and Flooding – The easiest and most widely used method.
- Spraying – Particularly effective in depositing a very thin coating with excellent adhesion.
- Wiping or Brushing – Very effective for coating small amounts of selected areas on a wire or cable.
Properties
- Physical Form
- Appearance
- White Emulsion
- Odor
- Slight Alcohol
- Physical Properties
Value | Units | Test Method / Conditions | |
Specific Gravity (25°C) | 1 | g/ml | — |
Primary Polymer | Fluorochemical | — | — |
Flash Point(TCC) | 34 | °C | — |
Packaging & Availability
- Sizes Available
Quart, Gallons, Drums, and 275 Gallon Totes
Storage & Handling
- Storage and Handling
The precautions used in handling ShieldSys 520 release coating are the same as those used in handling most coatings in industrial use. Contact with the skin should be avoided. Adequate ventilation must be provided in work areas. Breathing vapors should be avoided. If spraying, care should be taken to avoid inhaling mist or vapors, just as sprayed paint inhalation should be avoided.
Vapor may develop slight pressure. Therefore, care should be exercised when opening containers. Containers should be closed promptly after removing part of the contents to avoid evaporation. If this product is exposed to extreme heat conditions from misuse or equipment failure, toxic decomposition products that include hydrogen fluoride can occur.Hydrogen fluoride has an ACGIH threshold limit value of 3 parts per million parts of air as a ceiling limit, an OSHA permissible exposure limit (PEL) of 3 ppm of fluoride as an 8-hr time-weighted average, and 6 ppm of fluoride as a short-term exposure limit (STEL). Always wash hands after handling ShieldSys 520 coating. Do not smoke while handling this product.- Shelf-Life
ShieldSys 520 has a shelf life of 6 months from the date of shipment.