Products

Ertacetal® C POM-C / Acetron® GP Polyoxymethylene POM-C is a general purpose, copolymer acetal grade that is known for its porosity-free nature and low moisture absorption. These POM-C shapes also offer excellent machinability capabilities, making it a very versatile material that can excel in a multitude of environments.Features:Porosity-free materialLow moisture absorptionExcellent machinabilityBenefits:Suitable for use in food contact and medical applicationsMeets FDA, NSF, Canada AG, and SSI Standard compliance requirementsCan be used in a variety of environmentsApplications:Food processing and packaging equipmentMedical and diagnostic equipmentBearings and bushingsGears and electrical componentsValves and fluid handling components

Duratron® U1000 PEI Polyetherimide shapes, a high-performance plastic that offers exceptional strength, dimensional stability, and flame and heat resistance. With the ability to perform continuously to 340°F / 170°C, Duratron® U1000 PEI is the ideal solution for applications that require consistent dielectric properties over a wide frequency range.Features:High strengthDimensional stabilitySuperior flame and heat resistancePerform continuously to 340°F / 170°CHydrolysis and chemical resistanceBenefits:Suitable for a variety of applications requiring high strength and rigidity at elevated temperaturesCan withstand repeated autoclaving cycles making it ideal for medical, pharmaceutical, and biotechnology marketsHydrolysis and chemical resistance make it suitable for electrical / electronic insulators and semiconductor process componentsApplications:Medical and pharmaceutical industryBiotechnology marketElectrical / electronic insulatorsSemiconductor process componentsStructural components requiring high strength and rigidity at elevated temperaturesDuratron® U1000 PEI is the perfect choice for those looking for a high-performance plastic that can withstand harsh conditions. Whether you are looking to improve the performance of your medical, pharmaceutical, or biotechnology applications or need a material suitable for electrical/electronic insulators and semiconductor process components, Duratron® U1000 PEI is the ideal solution.

Ertacetal® C ELS Polyoxymethylene POM-C shapes exhibit excellent electrical conductivity qualities, low moisture absorption, high strength and stiffness, and great machinability capabilities. This grade in particular is recommended for use in electrical and explosion sensitive applications, and complies with REACH (EC) no 1907/2006 and UL 94 HB flame rating requirements.Features:Excellent electrical conductivityLow moisture absorptionHigh strength and stiffnessGreat machinabilityBenefits:Ertacetal® C ELS is the perfect solution for applications that require excellent electrical conductivity, low moisture absorption, and high strength and stiffness.Its great machinability makes it easy to work with, ensuring precise and accurate production.Applications:Ertacetal® C ELS is ideal for use in electrical and explosion sensitive applications and complies with REACH (EC) no 1907/2006 and UL 94 HB flame rating requirements.Its excellent electrical conductivity makes it perfect for use in electrical equipment, and its low moisture absorption ensures that it can be used in harsh environments without any issues.Its high strength and stiffness make it suitable for use in applications where precision and accuracy is required.

Altron™ LSG PC is a polymer made from polycarbonate (PC) and is available in the form of plates and rods. It boasts a wide range of features, including hydrocarbon resistance, ethylene oxide sterilizability, impact resistance, hot water resistance, biocompatibility, X-ray sterilizability, alkali resistance, excellent toughness, life science grade, no animal-derived components, gamma sterilizability, odorlessness, excellent dielectric properties, and acid resistance. Transparent in color, it finds applications in medical devices and assemblies, as well as in housings and enclosures, including those for medical device housings, analyzers, and bioreactor equipment.

Techtron® HPV PPS is a high-performance polymer that combines the excellent chemical and corrosion resistance of Polyphenylene Sulfide (PPS) with the added wear resistance and strength of glass fiber reinforcement and internal lubrication. This compression-molded material is designed to excel in demanding environments and applications where wear resistance and dimensional stability are required.Key features:Superior wear resistance: internally lubricated and glass fiber-reinforced, allowing it to withstand high loads and minimize wear and tearOutstanding chemical and hydrolysis resistance: suitable for use in harsh environments and chemicalsExcellent dimensional stability: minimal moisture absorption and low coefficient of linear thermal expansion, making it easy to maintain tight tolerancesGreat electrical insulating and dielectric propertiesLow coefficient of friction and inherent low flammabilityGlass fiber reinforced: increased strength and stiffness, ideal for wear componentsFood grade availableBenefits:Improved performance and durability of components in demanding environmentsIncreased resistance to chemicals, corrosion, and wearEnhanced precision and dimensional stabilityImproved electrical insulation and dielectric propertiesReduced friction and lower flammability riskMore cost-effective than advanced engineering plastics for certain applicationsApplications:Wear components such as bushings and bearings, CIP wash down parts, and pump, valve, and compressor applications in the aerospace, food processing, and oil and gas industries.Industrial equipment such as industrial drying and food processing ovens (bearings, rollers, etc.)Chemical process equipment (pump-, valve & compressor components)Electrical insulating systemsCost-effective alternative to advanced engineering plastics in certain applicationsTechtron® HPV is a versatile and reliable material that can help improve the performance and longevity of your products. It's available in a range of shapes and sizes, including food grade, making it easy to incorporate into your designs.

Altron™ 1000 PC machine grade polycarbonate is a transparent, amorphous thermoplastic that offers exceptional impact strength and elasticity, minimal moisture absorption, and outstanding resistance to acidic solutions. This grade is produced from select batches of non-UV stabilized polycarbonate resin that complies with EU and FDA regulations for plastics intended to come into contact with food products.Features:Transparent, amorphous thermoplasticSuperior impact strengthSuperior flexural modulus of elasticityMinimal moisture absorptionOutstanding resistance to acidsGreat electrical characteristicsBenefits:Durable and able to withstand high impactsResistant to deformation under loadLow moisture absorption means no swelling or warpingResistant to acidic solutions, making it suitable for a variety of applicationsExcellent electrical characteristics, making it suitable for semiconductor and electronics applicationsApplications:Semiconductor and electronics applicationsTransparent structural applicationsFood contact applications that comply with EU and FDA regulations

Ertacetal® C LQ - the ultimate solution for laser technology applications. Made from Polyoxymethylene (POM-C), this specialized grade is specifically designed to show markings with common laser technologies such as IR-YAG and UV-YAG. Unlike standard POM-C, which only experiences burning but no visible dark marking, Ertacetal® C LQ POM-C offers a bright-white, less transparent color that makes it perfect for laser marking, engraving, and cutting applications.Features:Bright-white, less transparent color for improved laser marking visibilityIdentical physical properties and machinability as standard Ertacetal® C natural POM-CProcessed by extrusion technology for consistent, high-quality performanceBenefits:Provides clear and precise markings with common laser technologiesCan be used in a wide range of laser technology applications such as engraving, cutting and markingHigh-quality and consistent performanceApplications:Laser technology applications such as engraving, cutting and markingIndustrial manufacturing and production processesMedical and diagnostic equipmentElectrical and electronic components