Monochem

Monochem 21 is a 2-component, 100% solids, high-build, liquid applied, Polyamine, Cyclo-Aliphatic Epoxy. Monochem 21 is available in high gloss, clear, standard colors and can be mixed with decorative chips, color micas, or silica sand. It is designed as a high performance primer, base coat or interior top coat.

Monochem 300 is a single component, liquid applied, water-based elastomeric urethane waterproofing base membrane. Monochem 300 can be used as part of an elastomeric system designed to expand and contract with normal structural movements. It provides a thick monolithic film that is water-tight. This system will not soften in heat or become brittle in the cold. Monochem 300 is designed for use on wood, concrete, and masonry to provide a waterproof elastomeric base membrane. It can also be applied as a below grade waterproofing coating.

Monochem 310 is a single component moisture-cured polyurethane elastomer. It is designed to coat concrete and plywood decks which are to be top coated, or covered with wood, tile, or outdoor carpeting. It is also designed to provide the ultimate in elongation as well as waterproofing properties Monochem 310 310 is the principal waterproofing base membrane used in Monochem Decking Systems. When Monochem 310 is incorporated into these systems, it waterproofs, and provides a thick, seamless, elastomeric membrane with 600% elongation for protection against water damage.

Monochem 45 is a two-component, high solids, self-leveling epoxy-cycloaliphatic amine. For added decorative and safety options, you can broadcast plastic chips, color micas, metallic pigments, color quartz, silica sand and other aggregates. It is designed as a high performance primer, base or interior top coat.

Monochem 610 is a pigmented single component, elastomeric aliphatic polyurea coating. It is primarily used as a topcoat over Monochem 310 (base coat) creating a system that displays superior elongation, wear resistance, weathering, UV and chemical protection.