Products

MONROE CUT 50 EPS is a clear, amber-colored, chlorine-free cutting oil. This product is designed for use in screw machine applications or other machining applications that require the use of low-viscosity, neat cutting oils. It is formulated using additives to provide a clean and efficient operating environment, compared to traditional sulfurized cutting oils.

MONROE CUT RR-22 is a high-performance cutting fluid designed for use in screw machines or other machining applications that require the use of neat cutting fluids. It is formulated using natural and synthetic ester base fluids to provide a clean and efficient operating environment. This product is entirely free of petroleum oils and is composed of vegetable-based esters and additives. It may be used on a variety of ferrous and non-ferrous metals including stainless steel, nickel alloys, copper, and copper alloys.

MONROE CUT 150 EPS is a chlorine-free cutting oil designed for use in screw machine applications or other machining applications that require the use of medium viscosity neat cutting oils. It is formulated using additives to provide a clean and efficient operating environment, compared to traditional sulfurized cutting oils.

Monroe Fluid Technology HD WAYLUBE 68 is a specially formulated product developed for the lubrication of machine tool ways and slides. It eliminates stick-slip or table chatter by reducing friction between mating surfaces. Where ways are heavily loaded it provides film strength and excellent EP protection. This product contains metal wetting and adhesive agents that enable it to form uniform films that resist squeezing from way surfaces while the machine is not in operation. By preventing stick-slip, the wear of way surfaces is minimized and their service life is greatly extended. It is also designed with additives to prevent the mixing of the product with water-based coolants.

MONROE CUT 80 CS is a high-performance cutting oil designed for use in screw machines or other machining applications that require the use of neat cutting oils. This product may be used on a variety of metals including steel, aluminum, and brass. It is formulated using additives to provide a clean and efficient operating environment.

ASTRO-SWISS HD VLV is a neat cutting oil designed for the most demanding Swiss-style screw machining applications where speeds and feeds are the most important aspect of the machining operation. The ASTRO-SWISS will reduce bar stock galling and scratching due to the guide bushings clamping and will help increase tool life because of the advanced design to activate during high-energy applied cutting operations.

ASTRO-CUT SUPER SYN is a heavy-duty, oil-free, synthetic cutting and grinding fluid concentrate designed to offer outstanding machining performance in even the most demanding applications, including aluminum and tough aerospace materials. This clean-running, low-foam product is stable in both soft and extremely hard water and contains additives that provide excellent rejection of tramp oils. In addition, ASTRO-CUT SUPER SYN provides rapid fine-settling capabilities and does not contain any secondary amines.

MONROE CUT 100 CF is a cutting oil designed for use in screw machine applications or other machining applications that require the use of neat cutting oils. It is chlorine and sulfur free allowing it to be used on a variety of metals including steel, aluminum, and brass. This product is formulated using additives to provide a clean and efficient operating environment, compared to traditional sulfurized cutting oils.

ASTRO-CUT SYN XBP is a heavy-duty, oil-free, synthetic cutting and grinding fluid concentrate designed to offer outstanding machining performance as well as excellent corrosion control on machinery and workpieces while providing a long sump life. The use of enhanced additive technology enables ASTRO-CUT SYN XBP to provide extended biological stability and corrosion resistance in the working fluid. This product may be used on a variety of metals, including steel, cast iron, and aluminum.

MONROE CUT 150 C is a high-performance cutting oil designed for use in screw machines or other machining applications that require the use of neat cutting oils. It may be used on a variety of ferrous metals including stainless steel. This clear amber liquid is formulated using additives to provide a clean and efficient operating environment.

MONROE CUT 160 SF is an amber-colored, general-purpose cutting and grinding oil designed for use in screw machines or other machining applications that require the use of neat cutting oils. This product can be used to machine the most difficult metals. It is formulated without the use of chlorinated additives, making it especially suited for machining titanium or its alloys.

MONROE CUT RR-10 is a high-performance cutting fluid designed for use in screw machines or other machining applications that require the use of neat cutting fluids. It is formulated using natural and synthetic ester base fluids to provide a clean and efficient operating environment. This product is entirely free of petroleum oils and is composed of vegetable-based esters and additives. It may be used on a variety of ferrous and non-ferrous metals including stainless steel, nickel alloys, copper, and copper alloys.

MONROE CUT 200 EPS is a chlorine-free cutting oil designed for use in screw machine applications or other machining applications that require the use of higher viscosity neat cutting oils. It is formulated using additives to provide a clean and efficient operating environment, compared to traditional sulfurized cutting oils.

MONROE 40-S is a low viscosity general purpose machining oil. This product is formulated without additives to provide a clean and efficient operating environment. It may be used on a variety of metals including steel, aluminum, and brass as well as glass, stone, and ceramics.

ASTRO-SWISS HD LV is a neat cutting oil designed for the most demanding Swiss-style screw machining applications where speeds and feeds are the most important aspect of the machining operation. This product will reduce bar stock galling and scratching due to guide bushings clamping and will help increase tool life because of the advanced extreme pressure additives designed to activate during high-energy applied cutting operations.

MONROE CUT 80 CPS is a high-performance cutting oil designed for use in screw machines or other machining applications that require the use of neat cutting oils. It may be used on a variety of metals including steel, stainless steel, aluminum, and brass. This product is formulated using additives to provide a clean and efficient operating environment.

ASTRO-SWISS HD MV is a neat cutting oil designed for the most demanding Swiss-style screw machining applications where speeds and feeds are the most important aspect of the machining operation. The ASTRO-SWISS will reduce bar stock galling and scratching due to the guide bushings clamping and will also help increase tool life because of the advanced design to activate during high-energy applied cutting operations.

MONROE CUT 240 CFS is a clear, brown-colored, general-purpose cutting oil designed for use in screw machines, deep hole drilling, gun drilling, or other machining applications that require the use of neat cutting oils. This product can be used to machine the most difficult metals. It is formulated with chlorinated and sulfurized additives, making it especially suited for machining difficult alloys.

MONROE HONE 15 SF is a high-performance straight oil recommended for a variety of metal honing, cutting, and forming operations. It is a light-colored product, which helps facilitate visual inspection of the workpiece during machining operations. This product is formulated with high-quality base stock and additives resulting in a lower-odor product when compared to similarly compounded products.

ASTRO-CUT B is a semi-synthetic, biostable, general-purpose metalworking coolant containing approximately 20% mineral oil. This product, when diluted with water, forms a translucent amber emulsion that offers excellent workpiece visibility, good lubricity, and superior cooling. It is designed for the machining and grinding of virtually all metals, except magnesium, and is formulated without the use of chlorine, phenols, nitrites, or DCHA.

ASTRO-CUT MICRO XL is a heavy-duty, mineral oil based, biostable, micro-emulsion concentrate designed specifically to address the challenges of machining and grinding aluminum and aluminum alloys, although it may be used to machine virtually all metals except magnesium. This chlorine-free formulation is especially suited for aerospace and other applications which restrict the use of chlorine. It has exceptional foam control for high-pressure operations and is designed using raw materials that have the ability to resist extreme biological degradation, thus providing a very long sump life in a properly maintained machine tool.

MONROE HONE 30 ES is a high-performance honing, cutting, and grinding oil. It is a clear amber liquid containing a unique blend of boundary lubricants in a very stable base oil blend. This formulary results in a product that provides excellent lubrication, wetting, and flushing properties. It is to be used as received and is not supposed to be mixed with water.

ASTRO-SOL C HD is an extreme-duty soluble oil concentrate designed for the most demanding machining operations where controlled foam and cleanliness are required. The unique combination of chlorinated extreme pressure additive, modern boundary lubricants, and a controlled-foam emulsifier package brings outstanding performance to the most severe applications. This product is formulated with a high level of stabilized chlorinated EP additive using a synthetic emulsification platform that is very stable and exceptionally low foaming.

ASTRO-CLEAN A is a low foam alkaline cleaner designed to remove process oils, grease, swarf, normal shop soils, and gummy deposits of oil from machine tools, floors, and other hard surfaces. It combines organic and mineral alkalinity builders, detergents, water conditioners, and deodorizers for optimum performance. Additionally, this product contains special additives that are designed to penetrate deep into compacted chips and swarf, and render the machine bacteria and fungus neutral. There is no concern about operator discomfort throughout the 24-hour cleaning cycle as it is mild enough on the skin.