Products

ASTRO-CUT SYN XBP is a heavy-duty, oil-free, synthetic cutting and grinding fluid concentrate designed to offer outstanding machining performance as well as excellent corrosion control on machinery and workpieces while providing a long sump life. The use of enhanced additive technology enables ASTRO-CUT SYN XBP to provide extended biological stability and corrosion resistance in the working fluid. This product may be used on a variety of metals, including steel, cast iron, and aluminum.

MONROE CUT 160 SF is an amber-colored, general-purpose cutting and grinding oil designed for use in screw machines or other machining applications that require the use of neat cutting oils. This product can be used to machine the most difficult metals. It is formulated without the use of chlorinated additives, making it especially suited for machining titanium or its alloys.

MONROE CUT 150 EPS is a chlorine-free cutting oil designed for use in screw machine applications or other machining applications that require the use of medium viscosity neat cutting oils. It is formulated using additives to provide a clean and efficient operating environment, compared to traditional sulfurized cutting oils.

ASTRO-CUT SS 250 TX is a semi-synthetic, general-purpose metalworking coolant containing approximately 10% mineral oil. This product, when diluted with water, forms a translucent amber emulsion that offers excellent workpiece visibility, good lubricity, and superior cooling. It is designed for the machining and grinding of virtually all metals, except magnesium, and is formulated without the use of chlorine.

Monroe Fluid Technology HD WAYLUBE 68 is a specially formulated product developed for the lubrication of machine tool ways and slides. It eliminates stick-slip or table chatter by reducing friction between mating surfaces. Where ways are heavily loaded it provides film strength and excellent EP protection. This product contains metal wetting and adhesive agents that enable it to form uniform films that resist squeezing from way surfaces while the machine is not in operation. By preventing stick-slip, the wear of way surfaces is minimized and their service life is greatly extended. It is also designed with additives to prevent the mixing of the product with water-based coolants.

MONROE 40-S is a low viscosity general purpose machining oil. This product is formulated without additives to provide a clean and efficient operating environment. It may be used on a variety of metals including steel, aluminum, and brass as well as glass, stone, and ceramics.

MONROE CUT RR-10 is a high-performance cutting fluid designed for use in screw machines or other machining applications that require the use of neat cutting fluids. It is formulated using natural and synthetic ester base fluids to provide a clean and efficient operating environment. This product is entirely free of petroleum oils and is composed of vegetable-based esters and additives. It may be used on a variety of ferrous and non-ferrous metals including stainless steel, nickel alloys, copper, and copper alloys.

MONROE CUT 110 SF is a general-purpose cutting oil designed for use in screw machines or other machining applications that require the use of neat cutting oils. It can be used to machine the most difficult metals. This product is formulated without the use of chlorinated additives, making it especially suited for machining titanium or its alloys.

ASTRO-SWISS HD VLV is a neat cutting oil designed for the most demanding Swiss-style screw machining applications where speeds and feeds are the most important aspect of the machining operation. The ASTRO-SWISS will reduce bar stock galling and scratching due to the guide bushings clamping and will help increase tool life because of the advanced design to activate during high-energy applied cutting operations.

MONROE CUT 150 C is a high-performance cutting oil designed for use in screw machines or other machining applications that require the use of neat cutting oils. It may be used on a variety of ferrous metals including stainless steel. This clear amber liquid is formulated using additives to provide a clean and efficient operating environment.

MONROE CUT 80 CS is a high-performance cutting oil designed for use in screw machines or other machining applications that require the use of neat cutting oils. This product may be used on a variety of metals including steel, aluminum, and brass. It is formulated using additives to provide a clean and efficient operating environment.

MONROE CUT 100 CF is a cutting oil designed for use in screw machine applications or other machining applications that require the use of neat cutting oils. It is chlorine and sulfur free allowing it to be used on a variety of metals including steel, aluminum, and brass. This product is formulated using additives to provide a clean and efficient operating environment, compared to traditional sulfurized cutting oils.

ASTRO-CUT SUPER SYN is a heavy-duty, oil-free, synthetic cutting and grinding fluid concentrate designed to offer outstanding machining performance in even the most demanding applications, including aluminum and tough aerospace materials. This clean-running, low-foam product is stable in both soft and extremely hard water and contains additives that provide excellent rejection of tramp oils. In addition, ASTRO-CUT SUPER SYN provides rapid fine-settling capabilities and does not contain any secondary amines.

MONROE CUT 80 CPS is a high-performance cutting oil designed for use in screw machines or other machining applications that require the use of neat cutting oils. It may be used on a variety of metals including steel, stainless steel, aluminum, and brass. This product is formulated using additives to provide a clean and efficient operating environment.

ASTRO-SWISS HD LV is a neat cutting oil designed for the most demanding Swiss-style screw machining applications where speeds and feeds are the most important aspect of the machining operation. This product will reduce bar stock galling and scratching due to guide bushings clamping and will help increase tool life because of the advanced extreme pressure additives designed to activate during high-energy applied cutting operations.

ASTRO-SWISS HD MV is a neat cutting oil designed for the most demanding Swiss-style screw machining applications where speeds and feeds are the most important aspect of the machining operation. The ASTRO-SWISS will reduce bar stock galling and scratching due to the guide bushings clamping and will also help increase tool life because of the advanced design to activate during high-energy applied cutting operations.

MONROE CUT 200 EPS is a chlorine-free cutting oil designed for use in screw machine applications or other machining applications that require the use of higher viscosity neat cutting oils. It is formulated using additives to provide a clean and efficient operating environment, compared to traditional sulfurized cutting oils.

MONROE CUT 50 EPS is a clear, amber-colored, chlorine-free cutting oil. This product is designed for use in screw machine applications or other machining applications that require the use of low-viscosity, neat cutting oils. It is formulated using additives to provide a clean and efficient operating environment, compared to traditional sulfurized cutting oils.

MONROE CUT 240 CFS is a clear, brown-colored, general-purpose cutting oil designed for use in screw machines, deep hole drilling, gun drilling, or other machining applications that require the use of neat cutting oils. This product can be used to machine the most difficult metals. It is formulated with chlorinated and sulfurized additives, making it especially suited for machining difficult alloys.

MONROE CUT RR-22 is a high-performance cutting fluid designed for use in screw machines or other machining applications that require the use of neat cutting fluids. It is formulated using natural and synthetic ester base fluids to provide a clean and efficient operating environment. This product is entirely free of petroleum oils and is composed of vegetable-based esters and additives. It may be used on a variety of ferrous and non-ferrous metals including stainless steel, nickel alloys, copper, and copper alloys.

MONROE HONE 15 SF is a high-performance straight oil recommended for a variety of metal honing, cutting, and forming operations. It is a light-colored product, which helps facilitate visual inspection of the workpiece during machining operations. This product is formulated with high-quality base stock and additives resulting in a lower-odor product when compared to similarly compounded products.

MONROE DRAW 400 AL is a heavy-duty, water-rinseable, drawing, grinding, and machining oil. It has been formulated for use on heavy drawing and blanking operations and has excellent adherence and anti-wipe properties. It can be used on aluminum and both ferrous and non-ferrous metals without staining or rusting. This product incorporates a unique lubricant and emulsifier which allows residues to be rinsed off with mild alkaline cleaners or even plain water.

ASTRO-DRAW SYN FP is a heavy-duty, synthetic, oil-free, drawing, forming, and stamping fluid incorporating a blend of boundary and EP lubrication additives, in a water-extendable package. It is a versatile drawing and stamping fluid that can be used neat or diluted with water. This product may be used on ferrous or non-ferrous metals. The film remaining after forming operations can be easily removed with water or an alkaline cleaner.

ASTRO-CLEAN E is a biodegradable, user-friendly, citrus solvent degreaser that replaces mineral spirits and chlorinated solvents for the removal of oily soils. Natural citrus solvents, emulsifiers, and detergents are present in this product. It is water extendable, safe on all metals, and works effectively at room temperature as well as when heated up to 150°F. When diluted at a 1:10 ratio, it actively inhibits corrosion and rust.