Knowde Enhanced TDS
Identification & Functionality
- Carrier
- Chemical Family
- CASE Ingredients Functions
- Technologies
- Product Families
- Composition
Blend of organomodified siloxane and polyoxyalkylene glycol.
Applications & Uses
- Applications
- Compatible Substrates & Surfaces
- Coating Type
- Ink & Toner Type
- Properties and Applications
AGITAN 786N contains a high performance organo modified siloxane in combination with a polyoxyalkylene glycol carrier. AGITAN 786N was designed to provide superior defoaming persistence and excellent dispersibility in a variety of aqueous coatings formulations without causing wetting defects such as craters or fisheyes.
Main applications:
- Industrial and wood coatings
- Floor polish
- OPV formulations and clear coatings
- Corrugated and packaging ink
- Film and foil printing
- Architectural coatings
- Recommended Levels and Use
The properties and performance of a defoamer are greatly dependent upon the specific formulation in which it is utilized and, consequently, should always be tested (possibly at different treatment levels, temperatures, and/or time intervals) to verify performance prior to use. A starting dosage level from 0.1% to 0.6%, based on the weight of the formulation, is recommended.
Properties
- Physical Form
- Typical Properties
Value | Units | Test Method / Conditions | |
Active ingredients | approx. 94.0 | % | — |
Consistency | approx. 800 | mPas/cps | — |
Density at 20°C | approx. 8.70 | lbs/gal | — |
pH Value(2% in dist. water) | approx. 7.3 | — | — |
Regulatory & Compliance
Packaging & Availability
- Packaging
Drums holding 480 lbs/ 218 kg net or 5 gallon pail holding 42 lbs/ 19 kg net.
Storage & Handling
- Shelf Life
- 12 Months
- Storage and Handling
Always mix prior to use as the product tends to separate slightly Protect from freezing. For better handling, store between 10°C (50°F) and 40°C (104°F) Mix product and retest for quality after one year from the date of manufacture. The minimum shelf life in closed containers is 12 months from the date of manufacture. Refer to Material Safety Data Sheet for additional handling information.