Products

AGITAN 109 is an emulsion with excellent stability and defoaming persistency. The defoamer is miscible with water in all ratios. It's recommended for architectural coatings, building products, printing inks, adhesives and polymerization processes.

AGITAN 282 has a wide formulation lattitude due to its ease of emulsification. Therefore it is especially suitable for clear coats, non-pigmented systems, low viscous systems and emulsion manufacturing.

MÜNZING’s METOLAT 700 series are APEO-free wetting agents with excellent equilibrium and dynamic surface tension reduction for a wide range of coating and ink applications. The METOLAT 700 wetting agent product range has varying HLBs specifically designed to provide optimal performance based on the customer’s system chemistry and application requirements.

ZINPLEX 15 contains 13.2% zinc metal ions that can be used to crosslink aqueous carboxylated polymers. This crosslinking or complexing takes place as the coating dries at either room temperature or under forced dry or higher baking conditions.

AGITAN 218 is a defoamer for all common emulsion systems.

AGITAN 120 is an emulsion with excellent stability and defoaming persistency. The defoamer is miscible with water in all ratios.

AGITAN 350 is a special composition with excellent stability and high efficiency. AGITAN 350 is alkali and acid resistant and can be used in a pH-range between 3 and 11.

WÜKONIL® FC 960 is a wax additive specially developed for waterborne systems such as façade paints and plasters.WÜKONIL® FC 960 is a wax additive specially developed for waterborne systems such as facade paints and plasters. Properties and advantages are very good hydrophobic agent Reduction of water absorbency and cracks Improvement of anti blocking Good surface slip Improvement of recoatability and shade stability Reduced adhesion of plasters on working equipment (\"spatula\"). Our high quality wax emulsions and dispersions are a necessity for all customers who prefer working with ready-made emulsions or dispersions in contrast to a dry wax. The ease of incorporation is the key benefit of liquid products.

only available in Asia! A highly effective all purpose defoamer for printing ink formulations, such as corrugated, film & foil, and screen ink formulations. Also provides excellent initial foam knockdown when used as a press-side defoamer.

METOLAT® P 590 is an APEO free wetting agent in powder form. It is added to dry blends, which are dissolved in water before application. The addition of METOLAT® P 590 results in an accelerated wetting of all solid particles, including sand, cement and fibers. This results in a more homogeneous mixture of the mass and a more uniform aspect of the surface after drying. In pigmented systems METOLAT® P 590 leads to a faster wetting of the pigment surface and prevents reagglomeration.

AGITAN P 803 is recommended for application in dry blends which are dissolved in water before application. The addition of AGITAN P 803 results in low foaming solutions, specifically aqueous pastes or masses with very low air content. In some mortar systems AGITAN P 803 shows a plastisizing effect, meaning the spreading value is increased. This is ideal for jointless flooring compounds.

AGITAN 731 is a highly effective siloxane defoamer for aqueous emulsion and water reducible systems. It is particularly effective in aqueous printing inks. A non-ionic structure provides excellent compatibility with most common binders.

AGITAN 701 is particularly well suited for water reducible systems. It is also recommended for aqueous emulsion systems, architectural coatings, emulsion plasters, building materials, industrial and wood coatings, printing inks and adhesives.

WÜKONIL® LP 50 is a waterborne wax additive for matt and glossy dispersion paints for interior and exterior use as well as for synthetic resin-bound rendering dispersion plasters. Our high quality wax emulsions and dispersions are a necessity for all customers who prefer working with ready-made emulsions or dispersions in contrast to a dry wax. The ease of incorporation is the key benefit of liquid products.

EDAPLAN LA 452 reduces the surface tension of aqueous systems without increasing the foam formation. Thus substrate wetting, leveling and gloss are improved. EDAPLAN LA 452 is free of silicone and has no adverse effects on recoatability. This additive is compatible with all common resin systems.

AGITAN 703 N is designed specifically for finely dispersed emulsions (hydrosols), water reducible systems and gloss emulsion paints.

WÜKONIL® RT 50 F is an aqueous wax-dispersion for waterbased coating systems. Our high quality wax emulsions and dispersions are a necessity for all customers who prefer working with ready-made emulsions or dispersions in contrast to a dry wax. The ease of incorporation is the key benefit of liquid products.

AGITAN 295 is a surface active product formulated for middle viscous, finely dispersed pigmented coatings. Existing foam will be destroyed. Re-creation of foam will be avoided. Furthermore AGITAN 295 is also recommended for treatment of different types of polyvinylalcohol - solutions.

AGITAN 265 is a highly effective defoamer for aqueous emulsion based systems and water reducible systems, where only low emmisions are allowed. Due to its low emulsifiability in water the defoamer is ideal for medium to high viscosity formulations. In low viscosity systems AGITAN 265 is recommended if high levels of wetting agents are present or high shear is applied which assists the incorporation of the defoamer.

TAFIGEL AP 15 is a synthetic thickener designed for universal use in low to high PVC systems. In comparison to common HASE thickeners it shows a stronger associative thickening character.

DEE FO 1015 integrates multiple technologies to provide a complete defoamer package of effectiveness and persistence. It is a unique defoaming technology with excellent stability and high efficiency even during the grind phase of coating manufacture. This defoamer is also alkali and acid resistant since it can be used in a pH-range between 3 and 11.

LUBA-print® 559/G is a wax dispersion / wachsdispersion product.Waterproofing of surfaces, to improve the depth of color and gloss from marbling effects and smoothing technique. Gives stucco-effects, is easy to level out and is tintable. Our high quality wax emulsions and dispersions are a necessity for all customers who prefer working with ready-made emulsions or dispersions in contrast to a dry wax. The ease of incorporation is the key benefit of liquid products.

AGITAN 105 is a special formulated emulsion type defoamer with excellent stability and defoaming properties. The defoamer is easy to emulsify in aqueous systems.

AGITAN DF 6686W is an emulsion with excellent stability and defoaming persistency. The defoamer is miscible with water in all ratios. AGITAN DF 6686W provides high cost effectiveness, Excellent compatibility, Very fast action, Good control of foam even at low levels.

AGITAN DF 681 F is a defoamer for all common emulsion systems. It provides the following properties that Controls foaming and aeration during paint manufacture, filling and application, Good compatibility in a wide range of systems, Retains high, and long lasting efficiency, Effective over a wide pH range.

METOLAT® P 588 is an APEO free wetting agent in powder form. It is added to dry blends, which are dissolved in water before application. The addition of METOLAT® P 588 results in an accelerated wetting of all solid particles, including sand, cement and fibers. This results in a more homogeneous mixture of the mass and a more uniform aspect of the surface after drying. In pigmented systems METOLAT® P 588 leads to a faster wetting of the pigment surface and prevents reagglomeration.

AGITAN P 801 is recommended for application in dry blends which are dissolved in water before application. The addition of AGITAN P 801 results in low foaming solutions, specifically aqueous pastes or masses with very low air content.

MUNZING’s METOLAT 700 series are APEO free wetting agents with excellent equilibrium and dynamic surface tension reduction for a wide range of coating and ink applications. The METOLAT 700 wetting agent product range has varying HLB’s specifically designed to provide optimal performance based on the customer’s system chemistry and application requirements.

METOLAT P 861 is recommended for the use in dry mixtures which are to be blended or diluted with water prior to application. METOLAT P 861 reduces the shrinkage in cementitious systems and acts as coalescent in powder paints.

WÜKONIL® HB 3000 is an efficient waterborne additive for unpigmented and pigmented wood coatings as well as for waterbased interior and exterior paints and pasty plasters.WÜKONIL® HB 3000 is an efficient waterborne additive for unpigmented and pigmented wood coatings as well as for waterbased interior and exterior paints and pasty plasters Properties and advantages in paints and plasters are improvement of hydrophbicity and early rain resistance Improvement of antiblocking Improved recoatability when painting \"wet in wet\" Properties and advantages in wood coatings are proves strongly hydrophbicity as well as early rain resistance Improvement of antiblocking. Our high quality wax emulsions and dispersions are a necessity for all customers who prefer working with ready-made emulsions or dispersions in contrast to a dry wax. The ease of incorporation is the key benefit of liquid products.

AGITAN 352 is a special composition with excellent stability and high efficiency. AGITAN 352 is alkali and acid resistant and can be used in a pH-range between 3 and 11.

WÜKONIL® HS is a polymer wax-dispersion for waterborne coating systems.Properties and advantages are improves scrub resistance Improves slip Improves blocking stability Very low particle size. Our high quality wax emulsions and dispersions are a necessity for all customers who prefer working with ready-made emulsions or dispersions in contrast to a dry wax. The ease of incorporation is the key benefit of liquid products.

WÜKONIL® HB 4000 is a wax-dspersion free of emulsifiers for application as additive in waterborne polymer systems.Properties and advantages are good hydrophobicity Improves early rain-resistance Improves \"antisticking\" Improves workability Reducing of skinning at thick coat systems. Our high quality wax emulsions and dispersions are a necessity for all customers who prefer working with ready-made emulsions or dispersions in contrast to a dry wax. The ease of incorporation is the key benefit of liquid products.

AGITAN 232 has a wide formulation lattitude due to its ease of emulsification. It can be effective in clear coats, highly pigmented systems, low viscosity systems and emulsion manufacturing.

AGITAN 526 is a polysiloxane emulsion with excellent stability and defoaming persistency. The defoamer is miscible with water in all ratios. AGITAN 526 is resistant to alkaline and acid environment. It can be used between pH 2 and 11.

AGITAN P 840 is recommended for application in dry blends which are dissolved in water before application. The addition of AGITAN P 840 results in low foaming solutions, specifically aqueous pastes or masses with very low air content. In some mortar systems AGITAN P 840 shows a plasticizing effect, meaning the spreading value is increased. This is ideal for jointless flooring compounds. In some systems setting time is prolonged but curing time is not influenced.