Knowde Enhanced TDS
Identification & Functionality
- Metalworking Fluid Type
- Fluids & Lubricants Functions
- Technologies
- Product Families
- Composition
Emulsion of mineral oil and non ionic surfactants, APEO free
Features & Benefits
- Labeling Claims
- Fluids & Lubricants Features
Applications & Uses
- Markets
- Fluids & Lubricants Type
- Fluids & Lubricants End Use
- Applications
Main applications:
- Mineral oil based cutting and lubricating fluids
- Synthetic and semi-synthetic fluids
- Recommended levels/use
AGITAN DF 2553 should be agitated before use.
Suggested dosage for some typical applications:
Mineral oil based cutting and lubricating fluids should be incorporated directly
- Concentrates 0.3-0.5 %
- Diluted Fluids 0.02-0.05 %
Synthetic and semi-synthetic fluids may be incorporated directly into concentrates and diluted fluids. In the manufacture of wholly synthetic types, AGITAN DF 2553 may be pre-blended with the emulsifiers and wetting agents.
- Concentrates 0.1-0.3 %
- Diluted Fluids 0.02-0.05 %
Properties
- Appearance
- liquid
- Typical Properties
Value | Units | Test Method / Conditions | |
Active Ingredients | approx. 87 | % | — |
Density at 20°C | approx.0.89 | g/cm³ | — |
Flash Point | min. 170 | °C | — |
pH (2% in dist. water) | approx. 7.5 | — | — |
Solubility in Water | insoluble | — | — |
Viscosity | approx. 150 | mPa s | — |
Packaging & Availability
- Packaging Type
Storage & Handling
- Storage and Packaging
AGITAN DF 2553 is not sensitive to freezing but for better handling it should be stored between 5 and 35 °C. As the product tends to separate it should be mixed before use. The minimum shelf life in closed containers is 15 months from the date of manufacture.
Totes holding 850 kg net, drums holding 130 kg net or cans holding 20 kg net.