Products

Nurcacit DBTU PDR is a Ultra accelerator for CR and a secondary accelerator for natural rubber, EPDM and SBR. Also used as a corrosion inhibitor in non-rubber applications.

Nurcacit ZDTP PDR is a fast curing secondary accelerator for NR and EPDM. It is mainly used as an accelerator in non-blooming., relative low cost, fast curing systems for EPDM when used in combination with MBTS or sulfenamides in NR compounds. ZDTP dramatically improves reversion resistance. Because of its non-amine based structure, ZDTP can be used as a component in non-N-nitrosamine generation cure systems. ZDTP is non-discoloring and non-staining. ZDTP is regulated for use in articles in contact with food as specified under Bg VV XXI, category 4, ZDTP is not regulated for use in FDA food contact applicants.

Nurcacit MTT PDR used as vulcanization accelerator for chloroprene rubber, Injection-molded and technical extruded articles, profiles, hoses, seals, mills (rollers), cable sheeting, conveyor-belts based on CR. Possesses good module, age-resistance and advantageous compression set. Nurcacit MTT dispersed perfectly in compounds based on polychloroprene. As a result of its relatively low melting point (about 60 to 70 C), the material usually melts down and disperses without any problems. Because Nurcacit MTT is a powerful accelerator, it is best to incorporate it at the end of the mixing process together with ZnO. Particularly in compounds with a high rubber content, high viscosity or containing large amounts of active carbon black, MTT should be incorporated into the otherwise finished compound while it is being preheated for conversion.

Nurcacit ETU PDR is a special curing accelerator for chloroprene rubber of CH and W, epichlorohydrin rubber and polyacrylate rubber, suitable for wire, cable, rubber belt and tube, rubber shoes, rubber coat and so on, also suitable for intermediate products of fine chemicals, antioxidant, insecticide, dyestuff, drug and synthetic resin, etc.

Nurcacit TMTD PDR can be used as a single accelerator, as a secondary accelerator or as a sulfur donor in most sulfur-cured elastomers. TMTD is scorch and gives fast cure rates. In sulfur less and EV cure system TMTD produces an excellent vulcanization plateau with good heat aging and compression set resistance. Good color retention is obtaining in non-black vulcanizates. TMTD is a valuable secondary accelerator for EPDM. In the vulcanization of polychloroprene rubber with N,N’-ethylene thiourea, TMTD may be used as a retarder.

Nurcacit TMTM PDR used as a secondary accelerator or as a booster for sulfenamides to achieve faster cure rates. TMTM is distinguished by very good processing safety in comparison with other thiurams. High curing activity and no discoloration. Unlike the thiuram dissulfides. TMTM will not produce cures in the absence of added elemental sulfur. It is an excellent accelerator for polychloroprene in association with DPG and sulpur.