Knowde Enhanced TDS
Identification & Functionality
- Polymer Name
- Technologies
- Product Families
Features & Benefits
- Materials Features
- Benefits
Mechanically similar to ABS, Nanovia ASA benefits from better weather resistance and is adapted for outside use, allowing for prints subjected to the sun, cold, rain, and sea water.
- Advantages
- UV resistant.
- Water resistant.
- Easy to print.
- Good dimensional control.
Applications & Uses
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
- Application Recommendations
Printing
Small pieces are printable without an heated enclosure.
Post treatment
It’s possible to smoothen Nanovia ASA using acetone.
Properties
- Physical Form
- Mechanical Properties
- Typical Properties
- Thermal Properties
| Value | Units | Test Method / Conditions | |
| Density | 0.97 | g/cm3 | ISO 1183 |
| Tensile Modulus | 47.0 | Mpa | ISO 527 |
| Flexual Modulus | 65.0 | Mpa | ISO 178 |
| Value | Units | Test Method / Conditions | |
| Extrusion Temperature (3D Printing) | 250 - 270 | °C | — |
| Plate Temperature (3D Printing) | 100 - 120 | °C | — |
| Enclosure Temperature (3D Printing) | 90.0 | °C | — |
| Nozzle (3D Printing) | All | — | — |
| Printing speed (3D Printing) | 20 - 60 | mm/s | — |
| Linear Weight (3D Printing, Ø 1.75 mm) | 2.34 | g/m | — |
| Linear Weight (3D Printing, Ø 2.85 mm) | 6.2 | g/m | — |
| Value | Units | Test Method / Conditions | |
| Glass Transition Temperature | 100.0 | °C | — |
| DTUL (1.8 MPa) | 79.0 | °C | ISO 75/A |
Safety & Health
- Health and Safety
Printing
We recommend printing Nanovia ASA in a room equipped with air extraction or by using appropriate breathing equipment. Whilst printing ASA produces a VOC derivative
Post treatmentWe recommend wearing standard safety equipment during the post treatment of your prints made with Nanovia ASA
Packaging & Availability
- Packaging Type
- Packing
Coils packed in individual boxes, vacuum packed with desiccant. Product delivered with batch number and traceability.
Other formats up to 25kg are available on request.
Spool L1 L2 D1 D2 D3 500g 55 45 200 105 52 2kg 100 90 300 210 52
Storage & Handling
- Storage
- Store Nanovia ASA in a dry and dark location, if possible with a desiccant.
- In order to guarantee good printing conditions dehydrate Nanovia ASA at 60°c for 4 hours or longer, when the spools has been exposed to moisture for an extended period.