Knowde Enhanced TDS
Identification & Functionality
- Fillers Included
- Polymer Name
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Materials Features
- Product Highlights
- Developed from Ultem 1010 (PEI: PolyetherImide) and carbon fiber, this Nanovia PEI CF composite is more rigid (Young's modulus: 4285 Mpa) than native PEI (Young's modulus: 3200 Mpa) and benefits from superior control and dimensional stability.
- Its temperature resistance up to 200 ° C and its UL-V0 non-flammability make it ideal for any project requiring parts that will not deform, despite high temperatures.
- Chemically inert, Nanovia PEI CF also adapts to environments in the presence of solvents.
- Advantages
- Operating temperature up to 200°C.
- High thermal stability.
- Higher stiffness than native PEI.
- Suitable for autoclave sterilization.
- Gamma ray resistant.
- Solvent resistant.
Applications & Uses
- Markets
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
- Usage Tips
Impression
In order to protect your equipment, it is advisable to use a reinforced nozzle, suitable for abrasive materials.
Properties
- Flame Rating
- Physical Form
- Mechanical Properties
- Typical Properties
- Thermal Properties
| Value | Units | Test Method / Conditions | |
| Density | 1.27 | g/cm3 | ISO 1183 |
| Tensile Modulus | 4685.0 | Mpa | ISO 527 |
| Flexual Modulus | 4950.0 | Mpa | ISO 527 |
| Value | Units | Test Method / Conditions | |
| Extrusion Temperature (3D Printing) | 360 - 400 | °C | — |
| Plateau Temperature (3D Printing) | 120 - 150 | °C | — |
| Enclosure Temperature (3D Printing) | min. 120 | °C | — |
| Nozzle (3D Printing) | min. 0.4 | mm | — |
| Printing speed (3D Printing) | 30 - 50 | mm/s | — |
| Diameter | 1.75 (+/- 50) | mm(µm) | — |
| Linear Mass (3D Printing, Ø 1.75 mm) | 3.05 | g/m | — |
| Linear Mass (3D Printing, Ø 1.75 mm) | 8.1 | g/m | — |
| VICAT Rate A / 50 | min. 215 | — | — |
| Flammability Rating (3mm) | V-0 | — | UL 94 |
| Heat Deflection Temperature (0.45MPa) | min. 200 | °C | ISO 75 |
| Value | Units | Test Method / Conditions | |
| Melting Point | 370.0 | — | — |
Regulatory & Compliance
- Certifications & Compliance
Safety & Health
- Health and Safety
Impression
It is advisable to print this material in an area equipped with air extraction or suitable protection.
Post treatmentWearing standard PPE (mask, gloves) is recommended during post-processing of parts printed with Nanovia PEI CF.
Packaging & Availability
- Packaging Type
- Packing
Coils packed in individual boxes, vacuum packed with desiccant. Product delivered with batch number and traceability.
Other formats up to 25kg are available on request.
Spool L1 L2 D1 D2 D3 500g 55 45 200 105 52 2kg 100 90 300 210 52
Storage & Handling
- Storage
- It is advisable to store your coils in a dry place, if possible accompanied by desiccant.
- To ensure a perfect impression, it is advisable to steam your filament at 110°C for 6 hours or more when the spool has been exposed to the open air for a long period.