Products

Plasticizer SC DLC-A is a diester of triethylene glycol, silicon-dioxide blend plasticizer, and softener for NR, SR's. Gives low temperature flexibility; improves processing.

Natrochem TAC DLC-A is a triallyl cyanurate, silicon-dioxide blend accelerator for EPM and co-agent for peroxide-cured EP polymers. It reduces cure time, eliminates odor caused by sulfur co-agent, improves heat aging and compression set resistance.

Sunpar 2280 DLC-A is a paraffinic process oil silicon dioxide blend plasticizer for NR, IR, EPDM, and EPR. Excellent incorporation and easy handling.

Zeonet PB DLC-A is a blend of tetra-n-butyl phosphonium benzotriazolate with silicon dioxide. Used as an elastomer curative and adhesion promoter.

Tarene 20 is a low-cost, dark, non-staining, thermoplastic oleo-resinous product having a naval stores base. The performance properties are comparable or superior to pine tar. Tarene 20 finds its widest application as a plasticizer, tackifier, and processing aid in rubber compounding. Other potential uses include adhesives, tar modifications, epoxy extension, coatings, mastics, and use as a low-cost acid for emulsions.

Natrochem DOP DLC-A is a Di-octyl phthalate-silicon dioxide blend plasticizer for NR, SBR, IIR, IR, polyisobutylenes and chlorinated polyethylenes. Large additions may retard cure slightly. Incorporates rapidly; reduces pigment requirements in color stocks; aid filler incorporation.

Trilene 65 DLC-A is a free-flowing powder made by combining Trilene liquid polymer and silicon dioxide. The blend is nominally 68% EPDM polymer and 32% silica. It is available as a dry, free-flowing powder that is easy to measure, store and transfer. DLC incorporates quickly and thoroughly into various elastomer systems, and gives quality and processing advantages when compared to neat polymer. Trilene 65 DLC-A is effective in EPDM, BR, NR, SBR and other elastomers.

Natro-Cel 6102-A is a naval stores-based NR, SR plasticizer, softener. Aids extrusions and processing; renders stocks tacky. Has no effect on cure rate. Prevents scorch.

Petrolatum T DLC-A is a blend of petrolatum and silica. It functions as a plasticizer and lubricant for NR, SBR, IR, IIR, and polyisobutylenes. Petrolatum T DLC-A incorporates rapidly and aids in filler dispersion.

Natrochem CI 50 DLC-A is a coumarone-indene resin-silicon dioxide blend widely used in rubber, adhesive, paint, coating and allied industries.

Petrolatum DLC-A is a blend of USP Petrolatum and silica. It functions as a plasticizer and lubricant for NR, SBR, IR, IIR, and polyisobutylenes. Petrolatum DLC-A incorporates rapidly and aids in filler dispersion.

Natro-Cel AL is an ammonium salt of alkyl phosphate, silicon-dioxide blend used as a mold lubricant and to inhibit corrosion. It removes tack from the surface of freshly mixed stock.

Natro-Rez 25 is a coumarone-indene resin used widely in rubber, adhesives, paints, coatings, and allied industries. Natro-Rez 25 is also available as a dry liquid concentrate, CI 25 DLC?-A with 72% actives.

Natro-Cel 97-A is an aromatic hydrocarbon, silicon-dioxide blend plasticizer/processing aid for NR, SBR, CR, IIR, NBR, BR, EPM, and EPDM. It aids filler dispersion, and gives rapid incorporation. Large loadings may retard cure slightly. Small Mooney viscosity reduction.

Natrochem DBP DLC-A is a dibutyl phthalate, silicon-dioxide blend polyisobutylene plasticizer for NR, SBR, CR, NBR, IR and IIR. It gives rapid incorporation, aids dispersion of fillers, and reduces pigment requirements in colored stocks.

Wintergreen 1200-30 is a blend of methyl salicylate and kaolin clay, in the form of a free-flowing powder. It is used as a reodorant in elastomeric blends.

Natro-Rez 10 is a Coumarone-Indene resin widely used in rubber, adhesives, paints, coatings, and allied industries. Natro-Rez 10 is also available as a dry liquid concentrate, CI 10 DLC?-A at 72% actives.

Natrochem DOA DLC-A is a di(2-ethylhexyl) adipate, silicon-dioxide blend plasticizer for NR, NBR, CR, and chlorinated PE. It gives good low temperature properties, excellent incorporation and easy handling.

Natro-Cel R-A is a blend of sodium sulfonate and selected process oils on silicon dioxide. Used as an effective dry-form plasticizer and processing aid for NR, SBR, IR, and IIR. Suggested for open-roll mill mixing and used in emulsification, corrosion and wetting applications.

Natro-Cel BCF-A is a Di(butoxy-ethoxy-ethyl) formal, silicon-dioxide blend, low-temperature plasticizer for NR, SBR, NBR, CR, and polysulfides. It gives rapid incorporation and aids filler dispersion. Large loadings may retard cure slightly.

Tarene 30 is a low-cost, dark, non-staining, thermoplastic oleo-resinous product having a naval stores base. The performance properties are comparable or superior to pine tar. Tarene 30 finds its widest application as a plasticizer, tackifier, and processing aid in rubber compounding. Other potential uses include adhesives, tar modifications, epoxy extension, coatings, mastics, and use as a low-cost acid for emulsions.

Tarene 14 is a low-cost, dark, non-staining, thermoplastic oleo-resinous product having a naval stores base. The performance properties are comparable to, or superior to, pine tar. Tarene 14 finds its widest application as plasticizer, tackifier, and processing aid in rubber compounding. Other potential uses include adhesives, tar modifications, epoxy extension, coatings, mastics, and use as a low cost acid for emulsions.

Tar-Cel 30-A is a Tarene, silicon-dioxide blend plasticizer and tackifier for NR, SBR, IR, IIR, and polyisobutylenes. It reduces mill-time over liquid pine tar and gives easier, faster, more accurate weighing.

Calsol 8240 DLC-A is a dispersion of naphthenic process oil on silicon dioxide. It is compatible with synthetic elastomers and their additives. Calsol 8240 DLC-A exhibits a balance of properties that make it the preferred choice for non-rubber applications as well. For example; resin extending, PVC, textiles, caulking compounds and other applications.

Natrochem CI 25 DLC-A is a coumarone-indene resin, silicon-dioxide blend widely used in rubber, adhesive, paint, coating and allied industries.

Tarene 90P is a low-cost, dark, non-staining, thermoplastic oleo-resinous product having a pitch base, with viscosity adjustments made with a process oil. The performance properties are comparable to or superior to pine tar. Tarene 90P finds its widest application as plasticizer, tackifier, and processing aid in rubber compounding. Other potential uses include adhesives, tar modifications, epoxy extension, coatings, mastics, and use as a low cost acid for emulsions.

Tar-Cel 14-A is a Tarene, silicon-dioxide blend plasticizer and tackifier for NR, SBR, IR, IIR, and polyisobutylenes. It reduces mill-time over liquid pine tar; gives easier, faster, and more accurate weighing.

Natro-Cel PE-A is a low molecular weight polyethylene grease, silicon dioxide blend, used as an internal lubricant and processing aid that helps mold flow, extruding and release. It also prevents tack in green rubber.

Polyester G25 DLC-A is a high molecular weight polyester-silicon dixoide blend plasticizer for NBR. Improves extrusion properties. Excellent incorporation and easy handling.

Natrochem Rapeseed Oil DLC-A is a vegetable oil, silicon-dioxide blend that is easy to handle and disperses readily in various elastomeric systems. Rapeseed Oil DLC-A is a safe, effective plasticizer supplied as a convenient free-flowing powder.

Natro-Cel 100N-A is a naphthenic petroleum oil, silicon-dioxide blend plasticizer for NR, CR, SBR, EPM, EPDM, NBR, IR, IIR, and polyisobutylenes. It gives exceptionally fast incorporation; aids filler dispersion, and reduces pigment in colored stock.

Natro-Rez 50 is a Coumarone-Indene resin and widely used in rubber, adhesive, paint, coating, and allied industries. Natro-Rez 50 is used primarily in dark rubber compounds as a tackifier and processing aid. Natro-Rez 50 is also available as a dry liquid concentrate, CI 50 DLC?-A at 74% actives.

Natro-Cel 1312-A is a nitrile rubber, silicon-dioxide blend plasticizer for nitrile rubber compounds requiring improved flow and knitting. It is non-extractable, non-staining, and usually used at 5-14 parts. Its effect on cure can be ignored. At higher levels additional sulfur or accelerator may be necessary (0.5 sulfur per 10 parts liquid Nipol 1312).

Natro-Cel 200-A-65 is a mixed diaryl p-phenylenediamine, silicon-dioxide blend. It is soluble in natural rubber and plastics.

Tarene 40 is a low-cost, dark, non-staining, thermoplastic oleo-resinous product having a naval stores base. The performance properties are comparable or superior to pine tar. Tarene 40 finds its widest application as a plasticizer, tackifier, and processing aid in rubber compounding. Other potential uses include adhesives, tar modifications, epoxy extension, coatings, mastics, and use as a low-cost acid for emulsions.

Natro-Cel TATM-A is a triallytrimellitate, silicon-dioxide blend activator for peroxide cured EPDM & CPE.