Products

NCP Coatings N-8521 - 3.5 VOC Universal Primer is a 3.5 VOC, Lead and Chromate Free Light Gray Phenolic Modified Primer designed for interior and exterior application to steel. This primer is very well suited for general industrial applications including heavy equipment, trailers, and trucks. Will accept many topcoats including some 2K Urethanes.

DynaSpec® MIL-PRF-22750 High Gloss is a two component, high solids epoxy coating. Grade A: For Navy and Army equipment requiring weather resistance. Grade A approved products can also be used as a Grade B material, for use on the interior of tactical equipment. The color of the coating is available in a wide variety of colors and gloss ranges including high gloss, semi-gloss and lusterless. Coating colors are designated by FED-STD-595 color chip number.

NCP Coatings N-7382IH - 3.5 VOC Black Primer/Topcoat is a 3.5 VOC, HAPs Free Black Coating designed for interior and exterior application to steel. This product is very well suited for general industrial applications including heavy equipment, trailers, and trucks. It can be used as a primer, or as a topcoat.

DynaSpec® N-8959A/B - MIL-DTL-53022E Type IV is a 2.5 VOC, HAPs Free, Lead and Chromate Free Buff Epoxy Primer meeting the stringent requirements of MIL-DTL- 53022E Type IV. This product is suitable for properly prepared ferrous and nonferrous substrates providing superior corrosion resistance when used as part of a recommended Military or OEM paint system.

DynaSpec® N-8055A/H2OB - MIL-DTL-64159 Type II is two component waterborne polyurethane chemical agent resistant coating (CARC) is intended to provide surfaces that are easily and effectively decontaminated after exposure to liquid chemical agents. It may be used in areas where VOC and VOHAPS are regulated. This Chemical Agent Resistant Coating meets MIL-DTL-64159 Type II and provides both visual and infrared camouflage to military vehicles and equipment.

DynaSpec® TT-C-490 Type III Wash Primers is used on ferrous and non-ferrous metals. MIL-C-8514 wash primer series designed specifically for use on aluminum substrates is also available. Both systems meet the pre-treatment requirements of TT-C-490 Type III. Consider NCP chrome-free wash primers, too.

NCP Coatings N-5570N - Black Water Reducible Primers is low VOC, HAP-free, high performance, water reducible primers exhibiting fast curing characteristics. This product is designed to be applied to mild steel and cast steel substrates where excellent early moisture and corrosion resistance is required.

NCP Coatings N-8584 - Black Water Reducible Primer is a low VOC, HAPS Free, high performance, water reducible primer exhibiting fast curing characteristics and can be applied by spray application. This product is designed to be applied to mild steel and cast steel substrates where excellent early moisture and corrosion resistance is required.