Products

Nilit NILAMID® A3 GF30 TF15 is a Polyamide 66 (Nylon 66) compound, 30% glass fiber reinforced, low wear and friction with 15% PTFE.This compound is intended for injection molding.NILAMID® A3 GF30 TF15 is primarily designed for the Industrial and Consumer industry. It is also suitable for Electrical and Electronic or Automotive applications.

Nilit NILAMID® B3 W GB30 is a Polyamide 6 (Nylon 6) compound, 30% glass bead reinforced, heat stabilized, UL listed HB.This compound is intended for injection molding.NILAMID® B3 W GB30 is primarily designed for the Automotive industry. It is also suitable for Electrical and Electronic or Industrial & Consumer applications.

Nilit POLYNIL® P50/1 is an unreiforced Polyamide 66 (Nylon 66) for compounding and alloying.This general pourpose 2.7 viscosity Polyamide 66 resin is FDA compliant.POLYNIL® P50/1 has moisture content lower than 0.1%.

Nilit NILAMID® A3 GB30 is a Polyamide 66 (Nylon 66) compound, 30% glass bead reinforced, heat stabilized.This compound is intended for injection molding.NILAMID® A3 GB30 is primarily designed for the Automotive industry. It is also suitable for Electrical and Electronic or Industrial & Consumer applications.

Nilit NILAMID® A3 J10 GF13 is a Polyamide 66 (Nylon 66) compound, 13% glass fiber reinforced, impact modified, UL listed HB.This compound is intended for injection molding.NILAMID® A3 J10 GF13 is primarily designed for the Automotive industry. It is also suitable for Industrial & Consumer applications.

Nilit NILAMID® A3 H CF20 is a Polyamide 66 (Nylon 66) compound, 20% carbon fiber reinforced, heat stabilized.This compound is intended for injection molding.NILAMID® A3 H CF20 is primarily designed for the Automotive industry. It is also suitable for Industrial & Consumer applications.

Nilit NILAMID® A3 W GF55 is a Polyamide 66 (Nylon 66) compound, 55% glass fiber reinforced, heat stabilized.This compound is intended for injection molding.NILAMID® A3 W GF55 is primarily designed for the Automotive industry. It is also suitable for Electrical and Electronic or Industrial & Consumer applications.

Nilit NILAMID® A3 MGF2010 is a Polyamide 66 (Nylon 66) compound, 10% glass fiber reinforced, 20% mineral filled, high heat stabilized.This compound is intended for injection molding.NILAMID® A3 MGF2010 is primarily designed for the Automotive industry. It is also suitable for Electrical and Electronic or Industrial & Consumer applications.

Nilit Nilamid® A3 H is a nilamid® a3 is an unfilled polyamide 66 (nylon 66) compound heat stabilized.This compound is intended for injection molding.Nilamid® a3 is primarily designed for the automotive industry. It is also suitable for electrical and electronic or industrial & consumer applications.

Nilit POLYNIL® P60 is an unreiforced Polyamide 66 (Nylon 66) for extrusion.This 2.9 viscosity Polyamide 66 resin is FDA compliant and is NSF-61 certified for contact with potable water.

Nilit NILAMID® A3 AL40 is a Polyamide 66 (Nylon 66) compound, 40% aluminum filled.This compound is intended for injection molding.NILAMID® A3 AL40 is primarily designed for the Automotive industry. It is also suitable for Electrical and Electronic or Industrial & Consumer applications.

Nilit NILAMID® B3 W M30 is a Polyamide 6 (Nylon 6) compound, 30% mineral filled, heat stabilized, UL listed HB.This compound is intended for injection molding.NILAMID® B3 W M30 is primarily designed for the Automotive industry. It is also suitable for Electrical and Electronic or Industrial & Consumer applications.

Nilit Nilamid® A3 J28 is a nilamid® a3 j20 is an unfilled polyamide 66 (nylon 66) compound, high impact modified.This compound is intended for injection molding.Nilamid® a3 j20 is primarily designed for the automotive industry. It is also suitable for industrial & consumer applications.

POLYNIL® P75 BR is a bright unreiforced Polyamide 66 (Nylon 66) for extrusion.This 3.1 viscosity Polyamide 66 resin is FDA compliant.

Nilit NILAMID® A3 TF20 is an unfilled Polyamide 66 (Nylon 66) compound, low wear and friction with 20% PTFE.This compound is intended for injection molding.NILAMID® A3 TF20 is primarily designed for the Industrial and Consumer industry. It is also suitable for Electrical and Electronic or Automotive applications.

Nilit NILAMID® B3 GF50 is a Polyamide 6 (Nylon 6) compound, 50% glass fiber reinforced, heat stabilized.This compound is intended for injection molding.NILAMID® B3 GF50 is primarily designed for the Automotive industry. It is also suitable for Electrical and Electronic or Industrial & Consumer applications.

Nilit NILAMID® A2 H J10 is an unfilled low viscosity Polyamide 66 (Nylon 66) compound, impact modified, UL listed HB.This compound is intended for injection molding.NILAMID® A2 H J10 is primarily designed for the Automotive industry. It is also suitable for Industrial & Consumer applications.

Nilit NILAMID® B3 GF30 TM2 is a Polyamide 6 (Nylon 6) compound, 30% glass fiber reinforced, low wear and friction with molybdenum disulphide.This compound is intended for injection molding.NILAMID® B3 GF30 TM2 is primarily designed for the Industrial and Consumer industry. It is also suitable for Electrical and Electronic or Automotive applications.

Nilit NILAMID® A3 TM2 is an unfilled Polyamide 66 (Nylon 66) compound, low wear and friction with molybdenum disulphide.This compound is intended for injection molding.NILAMID® A3 TM2 is primarily designed for the Industrial and Consumer industry. It is also suitable for Electrical and Electronic or Automotive applications.

Nilit NILAMID® A3 HHR GF30 is a Polyamide 66 (Nylon 66) compound, 30% glass fiber reinforced, heat and hydrolisis stabilized.This compound is intended for injection molding.NILAMID® A3 HHR GF30 is primarily designed for the Automotive industry. It is also suitable for Electrical and Electronic or Industrial & Consumer applications.

Nilit NILAMID® A3 GB50 is a Polyamide 66 (Nylon 66) compound, 50% glass bead reinforced, heat stabilized.This compound is intended for injection molding.NILAMID® A3 GB50 is primarily designed for the Automotive industry. It is also suitable for Electrical and Electronic or Industrial & Consumer applications.

Nilit NILAMID® B3 D10 is an unfilled Polyamide 6 (Nylon 6) compound, impact modified.This compound is intended for injection molding.NILAMID® B3 D10 is primarily designed for the Automotive industry. It is also suitable for Industrial & Consumer applications.

Nilit NILAMID® A3 W GF30 is a Polyamide 66 (Nylon 66) compound, 30% glass fiber reinforced, heat stabilized, UL listed HB.This compound is intended for injection molding.NILAMID® A3 W GF30 is primarily designed for the Automotive industry. It is also suitable for Electrical and Electronic or Industrial & Consumer applications.

Nilit NILAMID® C3 GF30 is a Polyamide 66/6 (Nylon 66/6) compound, 30% glass fiber reinforced, heat stabilized.This compound is intended for injection molding.NILAMID® C3 GF30 is primarily designed for the Automotive industry. It is also suitable for Electrical and Electronic or Industrial & Consumer applications.

Nilit NILAMID® B3 D is an unfilled easy flow Polyamide 6 (Nylon 6) compound, impact modified, UL listed HB.This compound is intended for injection molding.NILAMID® B3 D is primarily designed for the Automotive industry. It is also suitable for Industrial & Consumer applications.

Nilit NILAMID® B3 GCF2006 is a Polyamide 6 (Nylon 6) compound, 20% glass fiber and carbon fiber reinforced.This compound is intended for injection molding.NILAMID® B3 GCF2006 is primarily designed for the Automotive industry. It is also suitable for Industrial & Consumer applications.

Nilit NILAMID® B3 HH K30 is a Polyamide 6 (Nylon 6) compound, 30% mineral filled, high heat stabilized.This compound is intended for injection molding.NILAMID® B3 HH K30 is primarily designed for the Automotive industry. It is also suitable for Electrical and Electronic or Industrial & Consumer applications.

Nilit Polynil S40 is a PA 6.6 resin designed for compounding, injection and extrusion large viscosity range ul listed suitable for contact with food and potable water full dull 2.5 viscosity, fda compliant.

Nilit NILAMID® A3 GF30 TF20 is a Polyamide 66 (Nylon 66) compound, 30% glass fiber reinforced, low wear and friction with 20% PTFE, UL listed HB.This compound is intended for injection molding.NILAMID® A3 GF30 TF20 is primarily designed for the Industrial and Consumer industry. It is also suitable for Electrical and Electronic or Automotive applications.

Nilit NILAMID® B2 HH GF60 is a Polyamide 6 (Nylon 6) compound, 60% glass fiber reinforced, high heat stabilized.This high stiffness and glossy finish compound is intended for injection molding.NILAMID® B2 HH GF60 is primarily designed for the Automotive industry. It is also suitable for Electrical and Electronic or Industrial & Consumer applications.

Nilit POLYNIL® P120 is an unreiforced Polyamide 66 (Nylon 66) for extrusion.This 4.0 viscosity Polyamide 66 resin is FDA compliant and is NSF-61 certified for contact with potable water.

Nilit NILAMID® B3 J05 GF30 is a Polyamide 6 (Nylon 6) compound, 30% glass fiber reinforced, impact modified.This compound is intended for injection molding.NILAMID® B3 J05 GF30 is primarily designed for the Automotive industry. It is also suitable for Industrial & Consumer applications.

Nilit NILAMID® A3 WR GF30 is a Polyamide 66 (Nylon 66) compound, 30% glass fiber reinforced, peroxides stabilized, UL listed HB.It is WRAS certified.This compound is intended for injection molding.NILAMID® A3 WR GF30 is primarily designed for the Industrial & Consumer industry. It is also suitable for Electrical and Electronic or Automotive applications.

Nilit NILAMID® B3 H CF20 is a Polyamide 6 (Nylon 6) compound, 20% carbon fiber reinforced, heat stabilized.This compound is intended for injection molding.NILAMID® B3 H CF20 is primarily designed for the Automotive industry. It is also suitable for Industrial & Consumer applications.

Nilit NILAMID® A2 HH M25 is a low viscosity Polyamide 66 (Nylon 66) compound, 25% mineral filled and high heat stabilized.This compound is intended for injection molding.NILAMID® A2 HH M25 is primarily designed for the Automotive industry. It is also suitable for Electrical and Electronic or Industrial & Consumer applications.

Nilit NILAMID® A3 GF50 is a Polyamide 66 (Nylon 66) compound, 50% glass fiber reinforced, heat stabilized, UL listed HB.This compound is intended for injection molding.NILAMID® A3 GF50 is primarily designed for the Automotive industry. It is also suitable for Electrical and Electronic or Industrial & Consumer applications.