Products

MC511SN, StatNot™, is a static dissipative epoxy, woven glass based material with excellent control of the static dissipative properties. This material is used where static dissipation is required from surfaces to surface of the composite, in the x, y and z directions.

High flexural, impact and tensile strengths, and very high flexural modulus. It is constructed of glass fabric impregnated with an epoxy resin system. NP512 is engineered to provide better physical properties than NEMA FR-4, and be more dimensionally stable than standard NP510A. Applications for this material are where enhanced flexural modulus and physical strength are desired.

Woven glass fabric with high temperature phenolic resin. Good flexural, compressive and impact strengths at elevated temperatures. It is capable of continuous operation at 175°C. NP504 has excellent creep resistance because of the phenolic resin system. Meets MIL-I-24768/18 GPG. For NFPA 130 data please reference document NP504 Additional Data Sheet - NFPA 130. Certification to IEC standard is pending.

NP500CR (commonly referred to as G10 CR) consists of a glass fabric with an epoxy resin system resulting in excellent electrical characteristics and superior physical properties at cryogenic temperatures (-270 °C to 135 °C operating temperature range). Previously designated as Westinghouse/International Paper Micarta Cryogenic Grade 56 G12, it has low thermal conductivity and utilizes chemistry specifically designed for cryogenic applications.

Phenolic paper based grade for mechanical applications. Good tensile, compressive and flexural strength. Primarily a machining material, but may be hot punched up to .093" thick. NP610 meets MIL-I24768/12 Type PBM, ASTM D709 Type X and IEC 60893-3-4 PFCP 201.

NP193PM is composed of a 17 oz. aramid and "soft glass" fibers are combined to make a fabric that is stronger than pure aramid and less abrasive than glass fabrics. This material is impregnated with a high temperature phenolic resin matrix which includes a non-conducting solid lubricant. This composite has excellent mechanical strength at elevated temperatures and adverse environments. Applications include wear plates for conveyor systems, valve plates, and compressor and pump vanes.

MC330 is a cotton cloth/phenolic resin composite which is specially processed to be used in cryogenic applications. Such applications include spacers for installation of liquid oxygen apparatus where temperatures are as low as minus 320° F.

NP511 consists of a woven glass fabric combined with high temperature epoxy resin system. NP511 has excellent mechanical strength and electrical properties from cryogenic to elevated temperatures. Continuous operating temperature is 175°C. This material meets NEMA G-11, MIL-I-24768/3, Type GEB and IEC-60893-3-2 EP GC 203.

ES3 consists of a black phenolic paper core and two colored decorative surfaces impregnated with melamine resin. The three-ply, high performance material comes in a standard sheet size of 36 inches ± 1.00 x 39 inches ± 1.00, with standard thicknesses of 1/16, 3/32, and 1/8 inch. Standard finish options are polished, or P (highly polished and shiny), or LS (non-brushed and dull).

NP500A is constructed of a woven glass fabric combined with easy-machining, non-brominated epoxy resin. It is engineered to provide NEMA grade G-10 properties, but is easier to machine and more cost effective in many applications. Applications for NP500A include; low temperature thermal insulation, structural applications and various other mechanical, and electrical applications at low to moderately high temperatures. NP500A meets or exceeds the requirements of MIL-I-24768/2.

Fine weave canvas phenolic engineered for dimensional stability and mechanical strength at temperatures as high as 125ºC. Providing excellent moisture resistance and easy to machine, NP342LS low-shrink material was designed for use in Class B generators for wedge applications and can be tested to the General Electric specification A50A341.

Canvas machining grade for structural and mechanical applications. NP310HT has better impact strength than phenolic paper grades. It meets the requirements of MIL-I-24768/16, IEC-60893-4-PF CC 201 and is designed to meet GE specification A19B15B1.

ES4 is composed of layers of a pigmented paper melamine resin inner cores and white, black, or colored cover sheets. The main difference between this product and ES-1 is that the ES-4 core is colored rather than white. The material comes in a standard sheet size of 36 inches ± 1.00 x 39 inches ± 1.00, with standard thicknesses of 1/16, 3/32, and 1/8 inch. Standard finish options are polished, or P (highly polished and shiny), and Lamicoid satin, or LS (non-brushed and dull). Contact Customer Service for Availability.

ES1 is a melamine laminate composed of a white melamine paper core and various pigmented cover sheets. The three-ply material comes in a standard sheet size of 36 inches ± 1.00 x 39 inches ± 1.00, with standard thicknesses of 1/16, 3/32, and 1/8 inch. Standard finish options are polished, or P (highly polished and shiny), and Lamicoid satin, or LS (non-brushed and dull).

NP310 is a canvas machining grade for structural and mechanical applications. It has better impact strength than phenolic paper grades. NP310 meets or exceeds the requirements of MIL-I-24768/16 and IEC-60893-4-PF CC 201.

NP510A is a woven glass fabric composite combined with epoxy resin system. It is engineered to provide NEMA grade FR-4 properties. This material contains bromine on the epoxy resin backbone. NP510A is certifiable to MIL-I-24768/27, Type GEE-F.

NP511EM is constructed of a woven glass fabric combined with a high temperature, easy machining epoxy resin. It has excellent mechanical strength and electrical properties at elevated temperatures. The continuous operating temperature is 190°C, in mechanical applications. This material meets NEMA G-11 and MIL-I-24768/3, Type GEB.

MC511FR is a high strength, medium weave glass epoxy laminate that retains a minimum of 50 percent of its room temperature flexural strength when tested at 150ºC. Typical applications include structural applications when used in elevated temperatures. MC511FR also complies with MIL-I-24768/28, Type GEB-F. Certification to IEC standard is pending.

ES2 consists of three internal layers (two colored decorative surfaces, two white sub-cores just below the surfaces, and a black core centered in the thermoset composite material). ES-2 is a five-ply material, which comes in a standard sheet size of 36 inches ± 1.00 x 39 inches ± 1.00, with standard-thicknesses of 3/32 and 1/8 inch. Weights of the three standard-thickness sheets are approximately 7.0, and 9.3 lb., respectively. Standard finish options are polished, or P (highly polished and shiny), or LS (non-brushed and dull).

MC511AF is a high strength, medium weave glass epoxy laminate that retains a minimum of 50 percent of its room temperature flexural strength when tested at 150ºC. Typical applications include insulation in power generation equipment and other structural applications when used in elevated temperatures. MC511AF is certifiable to MIL-I-24768/3, Type GEB.

17 oz. aramid and "soft glass" fibers are combined to make a fabric that is stronger than pure aramid and less abrasive than glass fabrics. This material is impregnated with a high temperature phenolic resin matrix, which produces a composite with excellent mechanical strength at elevated temperatures and adverse environments. Applications include wear plates for conveyor systems, valve plates, and compressor and pump vanes. Variations of this material may be developed for specific applications.

NP130HF is a woven glass fabric composite combined with epoxy resin system, which is engineered to provide better physical properties than standard NEMA FR-4. It is significantly more dimensionally stable than NP130 or NP510A because of its low resin content. The main application for NP130HF is for “bed-of-nails” probe boards used for printed circuit board testing, and other structural applications. Certification to IEC-60893-3-2 EP GC 202

Being a heat treated version of RT310, RT310H is a tube made from a medium weight canvas fabric combined with a phenolic resin that has good physical properties and machining characteristics. Typical applications include textile bobbins, lap spools and structural parts that require good impact strength. RT310H also complies with MIL-I-24768/16, Type FBM and ASTM D709 Type II Grade C. Certification to IEC standard is pending.

Being a hot oil treated version of RT310, RT310S is a tube made from a medium weight canvas fabric combined with a phenolic resin that has good physical properties and machining characteristics. Typical applications include textile bobbins, lap spools and structural parts that require good impact strength. RT310S also complies with MIL-I-24768/16, Type FBM and ASTM D709 Type II Grade C.

Grade RT130X meets all of the property requirements of NEMA FR-4, with the added feature of being flame resistant, UL94 V-0. Typical applications include bushings, spacers and other structural parts. RT130X is manufactured with an extra fine glass fabric and has excellent machining characteristics. RT130X also complies with IEC 61212-3-1 EP GC 23.

Grade RT504F is composed of a fine weave glass fabric combined with a phenolic resin system. It has excellent heat and chemical resistance in basic systems. It has good physical strength and high impact resistance. The use of a fine weave fabric is to provide better finish to the final part. Typical applications include structural parts and can be substituted for G-7 in certain applications. Certification to IEC standard is pending.

Grade RT130M meets all of the property requirements of NEMA FR-4, with the added feature being flame resistant, UL94 V-0. Typical applications include bushings, spacers and other structural parts. RT130M has excellent machining characteristics. Certification to IEC standard is pending.

Grade RT504 is a heavy weave glass fabric combined with a phenolic resin system. It has excellent heat and chemical resistance in basic systems. It has good physical strength and high impact resistance. Typical applications include structural parts and can be substituted for G-7 in certain applications.

Being a heat treated version of RT342, RT342H is a fine weave canvas phenolic material with fabric construction weight intermediate to RT310 and RTB320. RT342H is designed for better machining than grade RT310 and lower cost than RTB320. Certification to IEC standard is pending.

Grade RT310 is a tube made from a medium weight canvas fabric combined with a phenolic resin that has good physical properties and machining characteristics. Typical applications include textile bobbins, lap spools and structural parts that require good impact strength. RT310 also complies with MIL-I-24768/16, Type FBM, ASTM D709 Type II Grade C and IEC-61212-3-1 PF CC 22.

Grade RT130 meets all of the property requirements of NEMA FR-4, with the added feature being flame resistant, UL94 V-0. Typical applications include bushings, spacers and other structural parts. RT130 has excellent machining characteristics. RT130 complies with IEC 61212-3-1 EP GC 23.

Fine weave canvas phenolic material with fabric construction weight intermediate to RT310 and RTB320. RT342 is designed for better machining than grade RT310 and lower cost than RTB320. It also complies with MIL-I-24768/16, Type FBM and ASTM D709 Type II Grade C.