Products

THINPREG™ TP 736LT is an exceptionally versatile hot-melt, epoxy prepreg. It can be cured at temperature as low as 80°C (176°F), or can be used for faster molding of components at 120°C (248°F). This is achieved with a good out-life of up to 60 days at 18-22°C (64-72°C)..

THINPREG™ GF736 is a toughened epoxy adhesive film, with excellent tack and drape characteristics, supplied on a paper backer either in an unsupported format or with an embedded ultra-lightweight glass carrier to aid handling. GF736 offers many advantages for bonding composite laminates, either to other laminates, or to structural cores, including; consistent bond-line thickness and weight, high strain to failure, high toughness, handling convenience, controlled flow and a 6 week out-life at ambient temperature (18-22ºC/64-72ºF).

THINPREG™ TP 150SC is designed for the automotive market due to the snap-cure capability for low TAKT times while achieving good mechanical properties, and the additional benefit of not requiring frozen or refrigerated storage.

THINPREG™ TP 415 is a rubber toughened version of TP402, design for sporting goods application, combining high elongation and great toughness. It is available in ultra-Thin Ply format, as low as 15gsm. This hot-melt epoxy prepreg is recommended to be cured at 135°C for optimal performance and a Tg until 145°C Onset (by E’ DMA). This matrix has a very good flow control. TP415 offers excellent mechanical properties on a wide variety of fibers, and fiber weights.