Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Polymer Name
- Reinforcement Material
- Composite Materials Functions
- Technologies
Features & Benefits
- Materials Features
- Highlights
ThinPreg™ 150SC is a hot-melt prepreg using a 100% solids, monomer-free, urethane-modified, vinyl-hybrid resin with excellent initiated stability and rapid cure at elevated temperature. ThinPreg™ 150SC can be cured in 1 minute at 150°C (302°F). This is achieved with a good out-life of up to 6 months at 18-22°C (64-72°C). It offers excellent mechanical properties on a wide variety of fibers. ThinPreg™ 150SC has an enthalpy of circa 70J/g. It can be used to make thick parts with low risk of exotherm. When curing the resin is less thermally stressed resulting in high ILSS performance; ThinPreg™ 150SC has an inter laminate shear strength equivalent to high performance structural epoxy prepregs.
- Features
• Snap-cure characteristics for fast cycle times
• Does not require frozen or refrigerated storage
• Designed for use with ATL machines and press molding or autoclaving Suitable tack for most hand layup and automated tape placement processes
• Ideal for prepreg from 50gsm to 300gsm
• Available on a variety of fibers
Applications & Uses
- Applications
- Composites End Use
- Composites Processing Methods
- PURPOSE
ThinPreg™ 150SC is commonly used in press molding and autoclave processes. It is anticipated to be used in high production volume components utilizing Automated Tape Laying deposition, pick and place transfer to a press, and rapid curing cycles to allow cycle times in the minutes.
Properties
- Physical Form
- Typical Properties
Value | Units | Test Method / Conditions | |
Flexural modulus | 4.4 | GPa | ISO 178 |
Flexural strength | 137.9 | MPa | ISO 178 |
Tensile elongation | 3.3 | — | ISO 527 2 |
Tensile modulus | 3 | GPa | ISO 527 2 |
Tensile strength | 78.6 | MPa | ISO 527 2 |
Technical Details & Test Data
- Typical Characteristics
Safety & Health
- Health and safety
ThinPreg™ 150SC contains resins which can cause allergic reaction. When uncured, ThinPreg™ 150SC should be handled with appropriate gloves. When cured, a composite laminate made of ThinPreg™ 150SC should be cut, drilled or machined in a room equipped with an exhaust ventilation and filtration system, by operators wearing protective clothing and masks. Refer to Material Safety Data Sheet for further information.
- Health and safety
ThinPreg™ 150SC contains resins which can cause allergic reaction. When uncured, ThinPreg™ 150SC should be handled with appropriate gloves. When cured, a composite laminate made of ThinPreg™ 150SC should be cut, drilled or machined in a room equipped with an exhaust ventilation and filtration system, by operators wearing protective clothing and masks. Refer to Material Safety Data Sheet for further information.
Storage & Handling
- Storage
ThinPreg™ 150SC will benefit from being stored in a freezer at -18°C, or in a fridge at 2-8°C, and out of direct sunlight, for up to 6 months without adversely affecting the material.
- Storage
ThinPreg™ 150SC will benefit from being stored in a freezer at -18°C, or in a fridge at 2-8°C, and out of direct sunlight, for up to 6 months without adversely affecting the material.
To avoid condensation on their surfaces, allow rolls to reach room temperature before unwrapping.