Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Agrochemical Functions
- Technologies
Features & Benefits
- Agrochemicals Features
- Product Features
An alkyl naphthalene sulfonate sodium salt condensate (NSC) that is closely related to Morwet D-425
- A dispersant designed to perform in standard systems under normal conditions
- EPA 40 CFR 180.920 status and same CAS number as Morwet D-425
- Key Attributes
Morwet® D-400 Powder as primary dispersant. Benchmark to achieve short milling time and low viscosity premix. Brings electrostatic stabilization and makes the formulation stable towards temperature changes.
Applications & Uses
- Product Applications
- Developed to formulate dry and liquid products for highly efficient CP formulations
- Effective with herbicide, fungicide and insecticide applications
- Provides excellent storage properties to WG
- Morwet D-400 replaces and outperforms competitor dispersant products at the same use level
- Low cost alternative
Morwet D-400 is an excellent choice for standard WDG and will perform equally as Morwet D-425. In contrast to many other NSC products on the market, Morwet D-400 ensures good properties of your formulation after storage. For more complex formulations, Morwet D-425 is a safe choice. Morwet products provide superior performance at low concentrations
Properties
- Formulation Type
- Appearance
- Tan powder
- Typical Properties
- Characteristics
- Specifications
Value | Units | Test Method / Conditions | |
Flash Point | min. 200 | °F | PMCC |
Value | Units | Test Method / Conditions | |
Active Content | min. 72.5 | % | — |
Foam Height according to Ross-Miles (after 5 min at 25°Cin 0.05% in de-ionised water) | 45 | mm | — |
Foam Height according to Ross-Miles (after 5 min at 25°Cin 0.05% in standard water D) | 25 | mm | — |
Foam Height according to Ross-Miles (immediately at 25°C in 0.05% in de-ionised water) | 70 | mm | — |
Foam Height according to Ross-Miles (immediately at 25°C in 0.05% in standard water D) | 35 | mm | — |
Surface Tension (according to Du Noüy at 25°C in 0.1%) | 60 | mN/m | DIN 53914 |
Wetting Power (according to Draves, at 25°C in 0.1%) | min. 5 | minutes | — |
Value | Units | Test Method / Conditions | |
Moisture Content | max. 3 | % | — |
pH (5% in water) | 7.5 - 10.0 | — | — |
Salt Content | max. 22.0 | % | — |
Technical Details & Test Data
- Test Data
Suspensibility after storage, 2 weeks 54°C
Influence of dispersant concentrate in an Imidacloprid 70 WG formation
Packaging & Availability
- Country Availability
- Regional Availability