Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Industrial Additives Functions
- Technologies
Features & Benefits
- Labeling Claims
- Industrial Additives Features
- Features
- Cold mix and recycling: Very slow breaking cationic emulsifier for plant produced mixes and Full Depth Reclamation (FDR) with long workability time
- Base stabilization: Emulsions made with Redicote E-4880 can be used for base stabilization in combination with cement
- Value for the money: Can be used at low dosages (1-1.5%) resulting in high quality emulsions with low settlement passing the cement mixing test
- Easy handling: Redicote E-4880 does not contain flammable solvents, has low viscosity, is completely water soluble and dissolves easily in the soap phase
- Suitable for tack, prime and dust suppression: Emulsions made with Redicote E-4880 are easy to dilute and can penetrate finely graded aggregate substrates due to their high wetting power
- Free of Nonyl phenol ethoxylates (NPEs): Redicote E-4880 does not contain NPEs.
- Excellent emulsion quality at lower dosage and can be used without addition of acid in the soap
- Non-flammable version of Redicote E-11 E for safer handling
- Cationic super stable proven emulsifier that has wider applicability.
- Super stable emulsifier providing extended workability FDR, plant produced cold mixes and base stabilization
- Faster setting for Cold in-place recycling (CIR) with or without cement. Can be used for many applications.
- Water based non-flammable quaternary ammonium emulsifier that can be used as a break retarder.
- Excellent emulsion quality at lower dosage and can be used without addition of acid in the soap
- Non-flammable version of Redicote E-11 for safer handling.
- Cationic super stable proven emulsifier that has wider applicability
Applications & Uses
- Applications
- Industrial Additives End Use
- Use Level
- 1 - 1.5%
- Dosage
Cationic slow set emulsion 1.0-1.5% pH 1.5-4.0 hydrochloric acid
Properties
- Physical Form
- Appearance
- Dark liquid
- Physical Properties
- Specifications
| Value | Units | Test Method / Conditions | |
| Density (at 20°C (68°F)) | 1.10 (9.16) | g/cc (lbs/U.S. gal) | — |
| Pour Point | -8 | °C | — |
| Density (at 30°C (86°F)) | 1.09 (9.11) | g/cc (lbs/U.S. gal) | — |
| Density (at 40°C (104°F)) | 1.08 (9.05) | g/cc (lbs/U.S. gal) | — |
| Viscosity (at 20°C) | 1200 | mPa.s | — |
| Viscosity (at 20°C (68°F)) | 970 | mPa s (cP) | — |
| Viscosity (at 30°C (86°F)) | 557 | mPa s (cP) | — |
| Viscosity (at 40°C (104°F)) | 307 | mPa s (cP) | — |
| Flash Point | min. 95 | °C | — |
| Value | Units | Test Method / Conditions | |
| Solids Content | 43.6 - 47-0 | % | PM5.020 |
Packaging & Availability
- Country Availability
- Packaging Type
- Regional Availability
- Packaging Information
- Redicote E-4880 is available in bulk shipment, in tight head polyethylene drums of 450 bs (204 kg) net weight, or in oneway totes (IBCs) of 2400 lbs (1089 kg) net weight.
Storage & Handling
- Storage Conditions
- Redicote E-4880 may be stored in carbon steel or stainless steel tanks. Bulk storage should be maintained at 20-35°C 68-95°F).
- Redicote E-4880 is alkaline and may cause severe irritation or burns to skin and eyes. Protective goggles and gloves must be worn when handling this product.