Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Polymer Name
- Technologies
- Product Families
Features & Benefits
- Materials Features
- Product Highlights
- Two-part, optically clear silicone system
- Based on a methyl silicone polymer
- Low viscosity
- 1:1 Mix Ratio (Part A:B)
Applications & Uses
- Markets
- Plastics & Elastomers Processing Methods
- Applications
- For bonding, casting or injection molding of high performance optical components
- For applications requiring index matching at 1.40
- For photonics applications requiring low outgassing and minimal volatile condensables to avoid condensation in sensitive devices
- Instructions for Use
Mixing
Thoroughly mix in a convenient 1:1 mix ratio by weight prior to use.
Vacuum Deaeration
Remove air entrapped during mixing by common vacuum deaeration procedure, observing all applicable safety precautions. Slowly apply full vacuum to a container rated for use and at least four times the volume of the material being deaerated. Hold vacuum until bulk deaeration is complete.
Substrate Consideration
Cures in contact with most materials. Exceptions include butyl and chlorinated rubbers, some RTV silicones and unreacted residues of some curing agents.
Adjustable Cure
Schedule Product cures at a wide range of cure times and temperatures to accommodate different production needs.
Properties
- Typical Properties
- Cured Properties
| Value | Units | Test Method / Conditions | |
| Viscosity | 3,125 (3,125 ) | cP (Mpa*s) | — |
| Durometer Type A | 50.0 | — | — |
| Tensile | 850 (5.86 ) | psi (MPa) | — |
| Elongat ion | 90.0 | % | — |
| Cte | 400.0 | ppm/°C | — |
| Dielectric Strength | 520 (20.28 ) | volts/mil (kV/mm) | — |
| Ionic Content Cl | max. 5 | ppm | — |
| Ionic Content K | max. 2 | ppm | — |
| Ionic Content Na | max. 4 | ppm | — |
| Lap Shear | 200 (1.38 ) | psi (MPa) | — |
| Mix Rat io | 0.042361111 | — | — |
| Refractive Index | 1.4 | — | — |
| Specific Gravity | 1.02 | — | — |
| Tack Free Time | 6.0 | hours | — |
| Volume Resistivity | 1.10E+15 | ohmcm | — |
| Work Time | 3.0 | hours | — |
| Value | Units | Test Method / Conditions | |
| Cure System | Platinum | — | — |
| Cure at 150 °C | 15.0 | minutes | — |
Packaging & Availability
- Country Availability
- Regional Availability