Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Polymer Name
- Technologies
- Product Families
Features & Benefits
- Materials Features
- Product Highlights
- Two-part, optically clear, non-phenyl containing addition cure silicone
- Designed to stay thermo-optically stable with heat and UV exposure
- 24 hours minimum work time
- 80 Type A durometer aids with scratch resistance and reduces tackiness
Applications & Uses
- Markets
- Plastics & Elastomers Processing Methods
- Applications
- For molding or casting hard, non-yellowing lenses for LED, solar or other applications where a hard, optically-stable silicone is needed
- Viscosity is designed to be used with conventional Liquid Injection Molding equipment, and the material is self-leveling for casting application techniques
- Instructions for Use
Mixing
Use with mix and dispense equipment in a 1:1 mix ratio. If mixing by hand, take care to minimize air entrapment.
Vacuum Deaeration
Remove air entrapped during mixing by common vacuum deaeration procedure, observing all applicable safety precautions. Slowly apply vacuum, up to 28 inches Hg, to a container rated for use and of volume at least four times that of material being deaerated. Hold vacuum until presence of air is no longer evident.
Substrate Considerations
Cures in contact with most materials. Exceptions include sulfur cured organic rubbers, latex, chlorinated rubbers, some RTV silicones and unreacted residues of some curing agents.
Properties
- Typical Properties
- Cured Properties
Value | Units | Test Method / Conditions | |
Viscosity | 21,500 (21,500 ) | cP (Mpa*s) | — |
Durometer Type A | 80.0 | — | — |
Tensile | 1,250 (8.62 ) | psi (MPa) | — |
Elongat ion | 65.0 | % | — |
Mix Rat io | 0.042361111 | — | — |
Refractive Index | 1.41 | — | — |
Specific Gravity | 1.07 | — | — |
Tear | 55 (9.7 ) | ppi (kN/m) | — |
Work Time | 24.0 | hours | — |
Value | Units | Test Method / Conditions | |
Cure System | Platinum | — | — |
Cure at 150 °C | 30.0 | minutes | — |
Packaging & Availability
- Country Availability
- Regional Availability