Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Product Highlights
- One-Part, black silicone dispersion
- Provided as an RTV silicone dispersion in VM&P Naphtha
Applications & Uses
- Markets
- Applications
- For applications requiring low outgassing and minimal volatile condensables under extreme operating conditions
- Provides atomic oxygen and electrostatic discharge protection
- For applications requiring a broader operating temperature range
- Instructions for Use
Thoroughly stir CV1-1148 prior to use to ensure homogeneity of material. Apply by spraying, dipping or brushing. Thin with VM&P Naphtha NuSil Technology’s R-1001) to the appropriate viscosity for spray equipment. Mix with a moisture free solvent in a closed container, preferably with a commercial paint shaker. Caution: Consult the MSDS for CV1-1148 prior to use, as the solvent carrier is hazardous.
Inhibition Concerns
Although generally considered to be non-corrosive to most substrates, the oxime cure system may cause discoloration in the presence of copper or copper alloys. Note: Some bonding applications may require the use of a primer. NuSil Technology SP-120 silicone primer is recommended.
Properties
- Appearance
- Black
- Typical Properties
- Cured Properties
Value | Units | Test Method / Conditions | |
Viscosity | 5,000 (5,000 ) | cP (Mpa*s) | — |
Non Volat ile Content | 40.0 | % | — |
Tack Free Time | 40.0 | minutes | — |
Mix Rat io | 1 PART | — | — |
Specific Gravity | 1.07 | — | — |
Value | Units | Test Method / Conditions | |
Cure at RTV | 7.0 | days | — |
Cure System | Oxime | — | — |
Packaging & Availability
- Country Availability
- Regional Availability