Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Product Highlights
- One-Part silicone dispersion
- Provided as an RTV silicone dispersion in VM&P Naphtha
Applications & Uses
- Markets
- Applications
- For applications requiring low outgassing and minimal volatile condensables under extreme operating conditions
- Provides atomic oxygen protection and resistance to radiation and thermal stress
- For applications requiring a broader operating temperature range
- Instructions for Use
Stir prior to use, as the product separates. Apply by spraying, dipping or brushing. Thin with VM&P Naphtha (NuSil Technology R-1001) to the appropriate viscosity for spray equipment. Mix with a moisture free solvent in a closed container, preferably with a commercial paint shaker.
Caution: Consult the MSDS for CV2-1147 prior to use, as the solvent carrier is hazardous.
Inhibition Concerns
Although generally considered to be non-corrosive to most substrates, the oxime cure system may cause discoloration in the presence of copper or copper alloys. Note: Some bonding applications may require the use of a primer. NuSil Technology SP-120 silicone primer is recommended.
Properties
- Appearance
- Translucent
- Typical Properties
- Cured Properties
| Value | Units | Test Method / Conditions | |
| Viscosity | 2,000 (2,000 ) | cP (Mpa*s) | — |
| Non Volat ile Content | 60.0 | % | — |
| Tack Free Time | 2.0 | hours | — |
| Mix Rat io | 1 PART | — | — |
| Specific Gravity | 1.12 | — | — |
| Value | Units | Test Method / Conditions | |
| Cure at RTV | 7.0 | days | — |
| Cure System | Oxime | — | — |
Packaging & Availability
- Country Availability
- Regional Availability