Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Product Highlights
- One-part, amino-functional silicone dispersed in xylene
- Cures at room temperature upon exposure to atmospheric moisture
Applications & Uses
- Markets
- Application Area
- Application Method
- Plastics & Elastomers End Uses
- Applications
- Ideal for use as a lubricious coating with high adhesion to metals and other substrates
- Low viscosity makes dispersions ideal for use as sprayable coatings
- Provides excellent lubricity for cutting edges, needle canulla, and other applications requiring friction reduction
- Instructions for Use
Mixing
Thoroughly stir material to ensure homogeneity. Exercise care to prevent solvent loss during deairing. Accomplish additional dilution for thin film applications by adding appropriate solvent. Mixer design/size/type, blade/propeller type, shear/RPM levels, and heat generated during mixing, are important parameters and should be addressed in order to have an adequately mixed dispersion. Warning: Consult the MSDS for MED10-4161 prior to use, as its solvent carrier is hazardous.
Coating and Use
Dispersions are more commonly used in dipping processes, but can also be sprayed. Make sure to apply under a fume hood or in a well ventilated environment. Care should be taken before placing coated parts in oven due to the presence of solvent.
Properties
- Physical Form
- Appearance
- Clear
- Typical Properties
- Cured Properties
Value | Units | Test Method / Conditions | |
Viscosity | 140 (120.04 ) | cP (Mpa*s) | — |
Non Volat ile Content | 33.0 | % | — |
Durometer Type 0 | 25.0 | — | — |
Mix Rat io | 1 PART | — | — |
Solvent | Xylene | — | — |
Special Feat ure | Specialty Coating, Dispersions | — | — |
Specific Gravity | 0.86 | — | — |
Value | Units | Test Method / Conditions | |
Cure System | Amine | — | — |
Cure at 25 °C | 5.0 | days | — |
Packaging & Availability
- Country Availability
- Regional Availability
Storage & Handling
- Storage and Handling
Most dispersions are stored prior to application. It is important to note that NuSil recommends keeping the dispersion in its original container when possible, tightly sealed and stored below 40º C. Care should be taken to prevent solvent evaporation and contamination during long or short term storage.