Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Technologies
Features & Benefits
- Ready-to-Use Product Features
- Product Highlights
- One-part, translucent, non-slumping silicone adhesive
- Supplied ready to use in Semco® cartridges
Applications & Uses
- Applications
- Applications
- Bonds aggressively to most surfaces including: glass, ceramics, most metals, natural and synthetic fibers, wood, painted surfaces, many plastics and other silicone rubbers
- For applications requiring a operating temperature range of -65 to 240°C (-85 to 465°F)
- Instructions for Use
CURE TIME
Cure time required for R-1140 depends on humidity and thickness of the material being bonded. Accomplish cure by exposure to atmospheric moisture. Cure may take longer in dry air but will occur at any level above 20% relative humidity. Cure will continue for several days until acetic acid odor has disappeared. Vulcanization and cure are not significantly improved by heating.
Properties
- Appearance
- Translucent
- Typical Properties
- Cured Properties
Value | Units | Test Method / Conditions | |
Lap Shear | 625 (4.31 ) | psi (MPa) | — |
Durometer Type A | 30.0 | — | — |
Elongat ion | 350.0 | % | — |
Flow Rat e | 1.5 (38.1 ) | in (mm) | — |
Mix Rat io | 1 PART | — | — |
Non Volat ile Content | 100.0 | % | — |
Specific Gravity | 1.09 | — | — |
Tack Free Time | 7.0 | minutes | — |
Tear | 40 (7.05 ) | ppi (kN/m) | — |
Tensile | 700 (4.83 ) | psi (MPa) | — |
Value | Units | Test Method / Conditions | |
Cure System | Acetoxy | — | — |
Cure at RTV | 72.0 | hours | — |
Packaging & Availability
- Country Availability
- Regional Availability