Products

NuSil™ MED-4750 is a high consistency silicone elastomer.

NuSil™ MED-4850 is a liquid silicone rubber.

NuSil™ MED-4870 is a liquid silicone rubber.

NuSil™ MED-4815 is a NuSil Technology's unrestricted materials may be considered for long-term implant applications (greater than 29 days).Liquid silicone rubbers, or LSRs, are elastomer systems reinforced with silica. They contain functional polymers of lower average molecular weight and viscosity when compared to high consistency rubbers (HCRs). They are typically supplied as two-component systems and formulated in a 1:1 mix ratio. Because their consistency is akin to petroleum jelly, they are often pumped with injection molding equipment to form molded components such as o-rings, gaskets, valves, seals, and other precision molded parts.LSRs are designed for liquid injection molding (LIM) processes which may utilize single or multi-cavity molds, or for overmolding processes. Originally designed for automated systems, they are developed with high volume applications in mind and benefit from their high strength.Comments: INJECTION MOLDING ELASTOMER.

NuSil™ MED-4080 is a high consistency silicone elastomer.

NuSil™ MED-4065 is a high consistency silicone elastomer.

LightSpan® LS-6140 is a low viscosity elastomer.

NuSil™ MED-2174 is a high consistency silicone elastomer.

NuSil™ R-2180-2 is a addition-cure high tear strength, silicone dispersion.

NuSil™ CF2-4721 is used by the aircraft industry as silicone adhesives and coatings for over five decades. Silicone's ability to maintain its elasticity and low modulus over a broad temperature range provides excellent utility in extreme environments. Recent advances in material technology provide more opportunities for the Aircraft engineer in choosing the best material for an intended application. Examples of NuSil's capabilities in custom silicones for Aircraft are demonstrated in the following sections. Fuel Resistance Static Dissipation and Electrically Conductive Silicones Ice-Phobic Coatings General Purpose: Silicone ResinComment: 75 Type D, Precatalyzed.

NuSil™ MED-4915 is a NuSil Technology's restricted materials may be considered for use in short-term implant applications, 29 days or less, or for external applications.Liquid silicone rubbers, or LSRs, are elastomer systems reinforced with silica. They contain functional polymers of lower average molecular weight and viscosity when compared to high consistency rubbers (HCRs). They are typically supplied as two-component systems and formulated in a 1:1 mix ratio. Because their consistency is akin to petroleum jelly, they are often pumped with injection molding equipment to form molded components such as o-rings, gaskets, valves, seals, and other precision molded parts.LSRs are designed for liquid injection molding (LIM) processes which may utilize single or multi-cavity molds, or for overmolding processes. Originally designed for automated systems, they are developed with high volume applications in mind and benefit from their high strength.Comments: INJECTION MOLDING ELASTOMER.

NuSil™ MED4-4516 is a high consistency silicone elastomer.

NuSil™ CV-2681-12 is a controlled volatility (NuSil™ CV) silicone materials silicone's ability to remain elastic at low temperatures and resistant to breakdown at high temperatures offer excellent utility in extraterrestrial environments where materials are repeatedly exposed to extreme temperatures. NuSil's Controlled Volatility (NuSil™ CV) and Ultra Low Outgassing TM (SNuSil™ CV) silicone products are used by leading space programs to provide the much-needed resilient protection they require against contamination and material degradation.Benefits of Silicone Materials for Space Broad Operating Temperature Compensation for CTE Mismatch Protection Against Atomic Oxygen Optically Clear Formulations Flight Legacy Comments: Volume Resistivity, 125 ohm-cm, Lap Shear 70 psi (0.48 MPa).

LightSpan® LS-6941 is a optical thermoset.

NuSil™ MED-4735 is a high consistency silicone elastomer.

LightSpan® LS-6143 is a optical thermoset.

NuSil™ MED-4050 is a high consistency silicone elastomer.

NuSil™ DDU-4630 is a NuSil Technology's unrestricted materials may be considered for long-term implant applications (greater than 30 days).NuSil offers a complete product line of silicone systems for use in drug delivery. Additionally, NuSil is capable of formulating, validating, manufacturing, testing and providing regulatory support for a custom product designed to achieve customer-defined, application-specific physical, mechanical and elution properties.Comments: HCR; Plasticity: 75 mil (1.9 mm).

NuSil™ MED-4755 is a high consistency silicone elastomer.

NuSil™ MED-4055 is a uhp high consistency silicone elastomer.

NuSil™ MED1-4855 is a liquid silicone rubber.

NuSil™ MED-4070 is a uhp high consistency silicone elastomer.

NuSil™ MED-4970 is a liquid silicone rubber.

NuSil™ MED-4930 is a liquid silicone rubber.

NuSil™ MED-4950 is a liquid silicone rubber.

NuSil™ MED-4765 is a high consistency silicone elastomer.

NuSil™ MED-4120 is a high consistency silicone elastomer.

NuSil™ EPM-2492 is used as a low stress alternative for electronic packaging, NuSil Technology's silicones allow the designer to choose from a unique line of silicones for various levels of packaging. We have an extensive line of encapsulants, adhesives, and greases to choose from. These include thermally and electrically conductive silicones for Thermal Interface Materials (TIM) or for EMI and RFI shielding applications.Benefits of Silicone for Electronics: Wide Operating Temperature Range of -115 °C to 250 °C Low moisture absorption, < 0.4% Typical Corrosion Resistance High Dielectric Strength > 500 V/mil (0.001 inch) or 20 kV/mm Fillers can be added to provide thermal and electrical conductive properties Low Modulus (Typically less than 5.5 MPa/800 psi) Stable chEMIcal and mechanical properties when exposed to high temperatures Low Shrinkage Available as gels, elastomers, film adhesives sheeting, and greases General Purpose: Thermal Interface Materials (TIMs)Comments: 0.62 W/m-K, BLT 200 µn, BN filled.

NuSil™ MED-4820 is a liquid silicone rubber.

NuSil™ MED1-4955 is a liquid silicone rubber.

NuSil™ EPM-2493 is used as a low stress alternative for electronic packaging, NuSil Technology's silicones allow the designer to choose from a unique line of silicones for various levels of packaging. We have an extensive line of encapsulants, adhesives, and greases to choose from. These include thermally and electrically conductive silicones for Thermal Interface Materials (TIM) or for EMI and RFI shielding applications.Benefits of Silicone for Electronics: Wide Operating Temperature Range of -115 °C to 250 °C Low moisture absorption, < 0.4% Typical Corrosion Resistance High Dielectric Strength > 500 V/mil (0.001 inch) or 20 kV/mm Fillers can be added to provide thermal and electrical conductive properties Low Modulus (Typically less than 5.5 MPa/800 psi) Stable chEMIcal and mechanical properties when exposed to high temperatures Low Shrinkage Available as gels, elastomers, film adhesives sheeting, and greases General Purpose: Thermal Interface Materials (TIMs)Comments: 1.0 W/m-K. BLT 25 µn, Al filled. Available as I Part.

NuSil™ EPM-2462 is a low volatility electrically conductive silicone elastomer.

NuSil™ MED-4770 is a high consistency silicone elastomer.

NuSil™ MED-4920 is a liquid silicone rubber.

NuSil™ MED-4980 is a liquid silicone rubber.

NuSil™ MED-4020 is a high consistency silicone elastomer.